Zte Blade A71 Manuel utilisateur

Quick Start Guide (en)……………….………2

Kurzanleitung (de) …………………………15

Ghid rapid (ro) ………………………………29

Vodič za brzi početak (sr)……………………43

Skrócona instrukcja obsługi (pl) …………..57

Kratke upute (hr) ………………………….…71

Οδηγός γρήγορης έναρξης (el) ……………85

Rövid üzembe helyezési útmutató (hu) .......99

Stručný návod na obsluhu (sk) ……………113

Stručný návod k použití (cs) ………………127

Ръководство за бърз старт (bg) …………141

Водич за почеток на користење (mk) ….155

ZTE Blade A71

Quick Start Guide

LEGAL INFORMATION

No part of this publication may be quoted, reproduced,

translated or used in any form or by any means, electronic

or mechanical, including photocopying and microfilm,

without the prior written permission of ZTE Corporation.

Notice

ZTE Corporation reserves the right to make

modifications on print errors or update specifications in

this guide without prior notice.

We offer self-service for our smart terminal device users.

Please visit the ZTE official website (at

www.ztedevices.com) for more information on self-

service and supported product models. Information on

the website takes precedence.

Visit https://www.ztedevices.com to download the

user manual. Just click Support from the home page

and then select the location, product type, and name to

search for related support information.

Disclaimer

ZTE Corporation expressly disclaims any liability for

faults and damages caused by unauthorized

modifications of the software.

Images and screenshots used in this guide may differ

from the actual product. Content in this guide may differ

from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE Corporation.

Android™ is a trademark of Google LLC.

The Bluetooth®word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by ZTE Corporation is under license.

microSDXC Logo is a trademark of SD-3C, LLC.

Other trademarks and trade names are those of their

respective owners.

Version No.: R1.0

Edition Time : February 5, 2021

Getting to Know Your Phone

Front camera

Touch screen

Earpiece

Volume key

Power key

Fingerprint

sensor

Charging/USB

Type-C jack

Headset jac

Back cameras

and flash

Speaker

Indicator light

nano-SIM

microSDXC

card tray

Proximity &

light sensor

Setting Up Your Phone

The nano-SIM card(s) can be installed or removed while

the phone is turned on.

WARNING!

To avoid damage to the phone, do not use any other

kind of SIM cards, or any non-standard nano-SIM card

cut from a SIM card. You can get a standard nano-SIM

card from your service provider.

1. Insert the tip of the tray eject tool into the hole on

the card tray.

CAUTION:

Never replace the included tray eject tool with sharp

objects. Ensure that the tray eject tool is perpendicular

to the hole. Otherwise, the phone may be damaged.

2. Pull out the card tray. You can place a nano-SIM

card on the right card slot, and place a nano-SIM

card or a microSDXC card (optional) on the left card

slot, as shown. Carefully slide the tray back into

place.

NOTE:

If two nano-SIM cards are installed, both cards can

connect to the 4G, 3G, or 2G network, and either card

can be used for mobile data.

Charging the Phone

Your phone’s battery should have enough power for the

phone to turn on, find a signal, and make a few calls. You

should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and USB Type-C cables.

The use of unapproved accessories could damage your

phone or cause the battery to explode.

WARNING!

Do not remove the back cover. The battery is not

removable. Removal may cause fire or explosion.

1. Connect the adapter to the charging jack.

2. Connect the charger to a standard AC power outlet.

3. Disconnect the charger when the battery is fully

charged.

NOTE:

If the battery is extremely low, you may be unable to

power on the phone even when it is being charged. In

this case, try again after charging the phone for at least

20 minutes. Contact the customer service if you still

cannot power on the phone after prolonged charging.

Powering On/Off Your Phone

Make sure the battery is charged before powering on.

•Press and hold the Power key to turn on your

phone.

•To power off, press and hold the Power key to open

the options menu, and touch >.

NOTE:

If the screen freezes or takes too long to respond, try

pressing and holding the Power key for over 10 seconds

to restart the phone.

Waking Up Your Phone

Your phone automatically goes into sleep mode when it

is not in use for some time. The display is turned off to

save power and the keys are locked to prevent

accidental operations.

You can wake up your phone by turning on the display

and unlocking the keys.

1. Press the Power key to turn the screen on.

2. Swipe up on the screen.

NOTE:

If you have set a face verification, a fingerprint, an unlock

pattern, a PIN or a password for your phone, you’ll need

to use your face or fingerprint, draw the pattern, or enter

the PIN/password to unlock your screen.

Table des matières

Autres manuels Zte Téléphone portable

Manuels Téléphone portable populaires d'autres marques

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur

LG Thrive Manuel utilisateur