Zte AC30 Manuel utilisateur

Autres manuels pour AC30

1

Table des matières

Manuels Téléphone portable populaires d'autres marques

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur

LG

LG Thrive Manuel utilisateur

1

ZTE AC30

User Guide

2

LEGAL INFORMATION

Copyright © 2011 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or

utilized in any form or by any means, electronic or mechanical, including

photocopying and microfilm, without the prior written permission of ZTE

Corporation.

The manual is published by ZTE Corporation. We reserve the right to make

modications on print errors or update specications without prior notice.

Version No. : R1.0

3

Introduction

ZTE AC30 is a 2G/3G Wi-Fi device, working in GSM/GPRS/EDGE/

WCDMA/EV-DO/HSPA network. The client devices could connect to it

via USB or Wi-Fi interface. The device supports data and SMS services,

enabling you to communicate anytime and anywhere.

This quick guide provides instructions on how to install and get started with

the product. For information about connection of services, please consult

your service provider.

Specication

Data Service

HSPA: DL 7.2 Mbps; UL 5.76 Mbps

EV-DO: DL 3.1 Mbps; UL 1.8 Mbps

WCDMA CS: 64 Kbps UL/DL

WCDMA PS: 384 Kbps UL/DL

Interface USB and Wi-Fi

Wi-Fi Standard 802.11 b/g

Wi-Fi Security WEP/WPA/WPA2

USB Version USB 2.0 HIGH SPEED

4

USB Interface Type Mini USB-B

Weight 80 g

Dimension 99.7 mm*53.7 mm*13.9 mm

Power Adapter 5 V/700 mA

Battery capacity 1500 mAh

*Standby time About 100 hours

*Working time About 4 hours

Recommended system

conguration

CPU: 500 MHz Pentium or above

Hard Disk: 10 M or above

RAM: 128 M or above

Operating system

Windows 7, Windows Vista(32bit or 64bit),

Windows XP (SP3 or later), MAC(10.4 or later)

Without Wi-Fi, Internet surfing with the USB

connection is only available for the Windows

and MAC OS.

Web browser IE (7.0 or later), Firefox (3.0 or later), Opera (10.0

or later), Safari (4.0 or later), Chrome (5.0 or later)

Operating temperature -10°C ~ +60°C

Storage temperature -20°C ~ +50°C

5

Charging temperature 0°C ~ +45°C

Humidity 5%~ 95%

Notes: The standby and working time are only for your reference. They are

based on the ideal working environment.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for your

reference. The actual device may be different.

6

Interface and Buttons

1.Power



Press and hold the button to switch on/off the device.



Press the button 10 times continuously to restore the

device to the factory default settings.

2.Charger/USB

port



Charge your device.



Connect the client to your device via USB cable.

LED Indicator

It indicates the status of your device.



When the device is powered on:

Indicator Status Description

Battery

indication

Red blinking Please charge the battery

Red solid Low battery

Green blinking Charging

Green solid Voltage of battery is full(Charging

completed)

7

Signal strength

indication

Red solid ERROR or NO si gn al o r NO

network service

Green blinking Signal is ok

Green solid Signal is good

Wi-Fi

indication

Green blinking Wi-Fi is active

LED off Wi-Fi is inactive

Network

indication

Red blinking 2G / 1x Modem data transferring

Red solid Register on 2G/ 1x network

Green blinking 3G/HSIA Modem data transferring

Green solid Register on 3G/HSIA network



When the device is powered off and charging:

Indicator Status Description

Battery

indication

Green blinking Charging

LED off Voltage of battery is full(Charging

complete)

8

Hardware Installation

Inserting (U)SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery

cover.

2. Insert the (U)SIM card into the (U)SIM card holder.

3. Insert the battery as shown with the contacts located against the metal

springs, and press the battery down into the case.

9

4. Line the battery cover up correctly and press gently to close the case.

Switching On/Off Your Device

Hold the Power button to switch on/off the device.

Notes:

The device is powered on when the signal strength indication lights up.