ZOSI C696 Manuel utilisateur

Quick Start Guide

C696 Wireless IP Camera

This guide willget you going with your camera. For more details and

information of the camera, please visit our official website:

www.zositech.com

V6.W.02.Z

English

CONTENTS

01 What’s in the Box

Camera

USB Cable Mounting Screws

Mounting Bracket

Quick Start Guide

NOTE:

Reset Needle Warning Sticker

01 English

Wall Mount

Magnetic Mount

Power Switch

Charge Indicator

Micro SD Card Slot

Reset Hole

DC 5V Power Port

HD Lens

IR LEDs

Status Indicator

Microphone

Spotlights

PIR Sensor

Speaker

Power SwitchHold 3-5 seconds Turn ON/OFF

Reset Button

Slow Flashing Red Light

Fast Flashing Red Light

Solid Red Light

Solid Blue Light

Status Indicator

Charge Indicator

Hold 3-5 seconds Device Reset

Waiting for connection

Device connecting

Connection succeeded

Camera’s charging

Camera’s fully charged

NOTE:

02 Gallery & Specs

English 02

Press and hold the power switch on the back of the camera for 3

seconds, the network indicator lights blink red. Power on the NVR, the

camera network indicator’s blinking red lights will turn into solid blue

lights, and the NVR will automatically connect and display video.

NOTE: It is recommended to test that each camera can work normally

before installation, if not, please contact us.

1. Do not charge the camera when the temperature is higher than 45

℃or lower than 0℃.

2. Please do not charge with an adapter in a humid environment.

3. If using a power adapter to charge, please use a certified power

adapter.

4. After fully charged, please plug the power port with the rubber

plug to prevent moisture or water.

Cameras come with batteries with partial charge when it leaves the

factory. Before using it for the first time, please fully charge the camera

with USB cable and charger before first use. Built-in battery, non-re-

movable.

Battery Charging：

Solid Red Light：Camera’s charging Solid Blue Light：Camera’s fully charged

Press and hold

Power Switch Charge Indicator

Power-ON

Precautions

Battery Charging

03 Power-ON

04 Battery Charging

03 English

05 Add Extra Devices

NOTE: The camera system has been matched before shipment. After

the camera is powered on, the system will automatically connect and

display video.

If you want to add or reset a camera, follow the steps below.

• Press and hold the power switch on the back of the camera for 3

seconds, and you will hear "Device is waiting to connect", and the

network indicator light will flash red slowly.

• Right-click the mouse, click the Menu - Main Menu - Information -

System, aim the camera at the QR code on the bottom right at a

distance of 30-100cm, and scan the QR code to start pairing.

English 04

06 Add Device to App

Tutorial Video

6.1 Account Registration

Zosi Smart iOS/Android

•When you hear "wireless configuration succeed" from the camera,

the network indicator light comes solid red for about 20 seconds, the

camera will be automatically added to the system and display video.

The operation video is as follows:

The following steps take Android system as an example. The interface

of iOS system will be slightly different.

• Use your mobile browser to scan the QR code above to download

Zosi Smart (both iphone and Android phone can scan and download.

iOS users can use your mobile camera to scan QR code or directly

search for "Zosi Smart" in App Store to download.

• Tap Register to register your Zosi account.

05 English

6.2 Add Device via QR Code

1. Press and hold the camera switch, and you will hear "Device is

waiting to connect", and the network status indicator light start flashing

red slowly.

2. Tap the Scan QR Code button and scan the QR Code on the

camera.

3. Enter the device name on the device information page, and tap the

Add an Unconnected Device button.

4. On the Connect to WiFi page, select WiFi and enter the

corresponding WiFi password, and tap Next.

NOTE: Support 2.4GHz WiFi only, please do not select 5GHz WiFi.

5. Point the QR code generated on your phone towards the camera

lens to scan.

6. When you hear "Wireless Configuration Succeed" from the camera,

tap Next and Confirm. Tap the Done button on the Wireless Connec-

tion Succeed page, and the device has been successfully added to

the App.

NOTE: If it fails to add device, please check the following:

1. Hear "Wireless connection failed"? Please check if the WiFi

password is entered correctly.

2. Please check if the device is plugged in.

3. Make sure that the network connected to the mobile phone and

the device can access the Internet normally.

English 06

07 Camera Installation

Unscrew the Mount Base

Screw the Mount Base on the Wall

7.2 Install with Mounting Bracket

4. Confirm if there are firewall restrictions on your home network. It

may be due to network reasons that the equipment cannot be

connected to our server normally in result the device is not online.

5. If you cannot identify the cause, please reset the device and

reconfigure the device network. Insert the reset pin into the reset hole

on the back for 5 seconds, and then add the device again according

to the above steps

NOTE: camera should be reset in operating state.

7.1 Place it on any flat surface: table, chair, TV

cabinet,etc.

1. Unscrew the mount base, drill holes in accordance with the holes

on the base, and tap the drywall anchors into the wall and screw the

mount base.

2. Attach the bracket to the base.

3. Screw the camera to the bracket and adjust the camera angle.

07 English

7.3 Installation Environment

Attach the Bracket to the Base Adjust the Camera Angle

Distancia: 5-50 pies (1,5-15 m)

)m3-2(seip9-6:arutlA

Height: Install the camera 6-9 ft (2-3m) above the ground.

Distance: Best accuracy for objects within 5-50 ft (1.5-15 m).

Angle: Tilt the camera down about 30°-60°from the horizontal position.

It is suggested to adjust the angle between camera and detected

object larger than 10°.

NOTE: Wake-up of the camera will be affected by various factors,

such as the distance between the person and the camera, the height

of the person, the height and angle of the camera, etc.

English 08

Table des matières

Autres manuels ZOSI Caméra de sécurité

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur