Zoom Q2n-4K Instructions de montage

Q2n-4K Firmware Update Guide

Copyright (C) 2020 ZOOM Corporation. All Rights Reserved.

•Copying or reprinting this manual in part or in whole without permission is prohibited.

•Windows® is a trademark or registered trademark of Microsoft® Corporation.

•Mac® is a trademark or registered trademark of Apple Inc.

•Other product names, registered trademarks and company names in this document are the property of their

respective companies.

•All trademarks and registered trademarks in this document are for identification purposes only and are not

intended to infringe on the copyrights of their respective owners.

•Proper display is not possible on grayscale devices.

•The illustrations in these instructions might differ from actual screens.

● ZOOM Corporation will bear no responsibility for any losses or third-party claims

resulting from the use of this software. Moreover, distribution, sale, leasing, rental,

alteration, and reverse engineering without permission of this software are

prohibited. The specifications of this software and the contents of this document

could be changed without notice in the future.

2

This guide explains updating the firmware to version 1.10 as an example.

1. Download the firmware update file.

Download the ZIP file that contains the firmware update file from the Q2n-4K download page.

3

On Windows

2. Extract the ZIP file.

Select the folder that contains the downloaded ZIP file. Click ①“Compressed Folder Tools” followed by ②“Extract

all”. This extracts the ZIP file.

①

②

4

3. Copy the firmware update file to a microSD card.

Copy the “Q2N4K_FW.BIN” file to a microSD card.

Firmware update file

Copy the firmware update

file to a microSD card.

5

On macOS

2. Extract the file.

After downloading, open the ①“Downloads” folder, which appears at the right end of the Dock by default.

Then, click ②. Downloaded files will be shown.

3. Copy the firmware update file to a microSD card.

Copy the “Q2N4K_FW.BIN” file to a microSD card.

①

②

Firmware update file

Copy the firmware update

file to a microSD card.

6

The following procedures are the same on both Windows and macOS.

4. Install new batteries in the Q2n-4K or connect an AC adapter.

NOTE

Executing a firmware update is not possible if the remaining battery power is low.

5. Insert the microSD card into the Q2n-4K microSD card slot.

microSD card

6. While pressing , press and hold to turn the power on.

This opens an update confirmation screen.

7

7. Press to select “YES ●”.

This opens a final confirmation screen.

8. Press to select “YES ●”.

After updating, the Completion Screen opens.

NOTE

During the firmware update, do not turn the power off or remove the microSD card.

9. Press and hold to turn the power off.

NOTE

In the unlikely event that a firmware update should fail while in progress, conduct the procedures from the beginning to

update the firmware again.

© 2020 ZOOM CORPORATION Z2I-4186-01

Autres manuels pour Q2n-4K

4

Table des matières

Autres manuels Zoom Équipement d'enregistrement

Zoom

Zoom MRS-802 Manuel utilisateur

Zoom

Zoom H6 Handy Recorder Manuel utilisateur

Zoom

Zoom H4N Manuel utilisateur

Zoom

Zoom G5 Manuel utilisateur

Zoom

Zoom G5n Manuel utilisateur

Zoom

Zoom R20 Instructions de montage

Zoom

Zoom G5n Manuel utilisateur

Zoom

Zoom MRS-802 Manuel du propriétaire

Zoom

Zoom MRS-1608 Manuel utilisateur

Zoom

Zoom H4N Manuel utilisateur

Zoom

Zoom PodTrak P4 Manuel utilisateur

Zoom

Zoom Handy REcorder H1 Guide d'installation

Zoom

Zoom A1 FOUR Manuel utilisateur

Zoom

Zoom F4 Instructions et recettes

Zoom

Zoom R24 Manuel utilisateur

Zoom

Zoom Q8n Control Manuel utilisateur

Zoom

Zoom Palmtop Studio PS-04 Manuel utilisateur

Zoom

Zoom H2next Manuel utilisateur

Zoom

Zoom F8 Manuel utilisateur

Zoom

Zoom H4n Pro Manuel utilisateur

Zoom

Zoom R4 Manuel utilisateur

Zoom

Zoom RFX-1000 Manuel utilisateur

Zoom

Zoom 9050 Manuel utilisateur

Zoom

Zoom R16 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien