Zonet ZEW2540P Manuel utilisateur
Copyright Statement
is the registered trademark of Zonet Technology Inc. All the
products and product names mentioned herein are the trademarks or registered
trademarks of their respective holders. Copyright of the whole product as
integration, including its accessories and software, belongs to Zonet Technology
Inc. ithout the permission of Zonet Technology Inc., any individual or party is
not allowed to copy, plagiarize, imitate or translate it into other languages.
802.11n ireless USB Adapter
1
Table of Content
Chapter 1. Introduction……………………………………………………………2
1.1 Welcome…………………………………………….…………………………2
1.2 Product Feature…………………………………………………………………2
1.3 Content of Package……………….…………………….……………………2
Chapter 2. Installation…………………………………………………………………3
Chapter 3. Configuration………………………………………………………..……
3.1 Station Mode…….………………………………………………………..……
3.1.1 Profile…….……........……………………………………………..……7
3.1.1.1 Add/Edit Profile…………………………………………......……7
3.1.2 Network.......………………………………………………………………9
3.1.3 Link Status…………………………………………………………..…...9
3.1.4 Advanced……………..……….…………………………………………10
3.1.5 Statistics……………..……….…………………………………………10
3.1. WMM….......................………........………………..………………11
3.1.7 WPS….......................………........………………..………………12
3.1.8 SSO….......................………........………………..………………13
3.1.9 CCX….......................………........………………..………………13
3.2 AP Mode………………..…....……………………………….…………..14
3.2.1 Configuration………..……………………………………………...….15
3.2.2 Access Control…......………..………………………...………..……1
3.2.3 MAC Table...........………..…………………………....………………17
3.2.4 Switch to Working Station Mode..………………………………17
3.3 Use Zero Configuration................................….……….…………..18
Chapter 4. How to connect with PSP………………………………………….21
4.1 Configure PSP with Ad-Hoc mode……………………………….………21
4.2 Configure XLink Kai…………………………………………………………23
Chapter 5. Product Specifications………….........................……………….24
Chapter . TroubleShooting………….........................………….............25
802.11n ireless USB Adapter
2
Chapter 1 Introduction
1.1 Welcome
Thank you for purchasing Zonet ZE 2540P-802.11n wireless USB adapter.
ZE 2540P connects you with IEEE802.11n networks at receiving rate up to an
incredible 150Mbps! By using the reflection signal, 802.11n's “Multiple In,
Multiple Out” (MIMO) technology increases the range and reduces “dead spots” in
the wireless coverage area.
Soft AP supported by ZE 2540P can help you establish wireless LAN networking
with lowest cost. Besides, PS ( i-Fi Protected Setup) simplify the security
setup and management of i-Fi networks. Supports MM for Multimedia
Applications with Quality of Service in i-Fi® Networks. Especially supporting
PS3, PSP, Nintendo DS and ii connections with XLink Kai software will be your
best choice to enjoy on-line gaming.
1.2 Product Feature
Complies with IEEE 802.11n, IEEE 802.11g and IEEE 802.11b standards
Provides USB2.0 port
Provides 150Mbps receiving rate and 150Mbps sending rate
Supports 20MHz/40MHz frequency width
Auto-
detects and changes the network transmission rate
Provides two work modes: Infrastructure and Ad-Hoc
Supports Soft AP to establish your wireless LAN networking
supports PS3, PSP, ii and Nintendo DS connecting with Internet and
Xlink Kai to enjoy on-line gaming
Supports 64/128-bit EP, PA, PA2 encryption methods and 802.1x
security authentication standard
PS ( i-Fi Protected Setup) simplify the security setup and management
of i-Fi networks.
Supports MM for Multimedia Applications with Quality of Service in
i-Fi® Networks
Supports indows 2000 / XP / Vista / 7
1.3 Contents of Package
One ZE 2540P
One Installation CD w/User Manual
One Quick Installation Guide
One USB cable
Contact your local authorized reseller or the store purchased from for any items
damaged and/or missing.
802.11n ireless USB Adapter
3
Chapter 2 Installation
NOTE:
1.
For future driver upgrading, please visit our website at www.zonetusa.com
2.
Snap-shot screens of the following installation procedure are based on Windows
X . Installation procedures will be similar for other windows operating systems.
1. Insert ZE 2540P into a USB
slot of your computer.
2. Select Cancel when “Found
New Hardware” window
appears.
3.
Insert Installation CD to your
CD-ROM drive. B
r
owse CD and
double-click
setup.exe
in
Driver folder to execute it. The
wizard will run and install all
necessary files to your
computer automatically.
4. C
lick
Next
to accept the
Agreement. Or click
Cancel
to
exit
.
802.11n ireless USB Adapter
4
5. S
elect
Install driver and
Ralink WLAN Utility
or
Install driver only
then click
Next
.
. S
elect
Ralink
Configuration
Tool
or
icrosoft Zero
Configuration Tool
then
click
Next
.
a. It’s recommended to select
Ralink Configuration
Tool, which provides fully
access to all function of
ZE 2540P.
b. If you prefer to use the
wireless configuration tool
provided by indows XP or
Vista, please select
Microsoft Zero
Configuration Tool
.
7. Click Install to start the
installation.
802.11n ireless USB Adapter
5
8. Click Finish to complete the
software installation.
You will see a tray icon appear in your system tray at the bottom of the
screen after the software and hardware installation completed successfully.
802.11n ireless USB Adapter
6
Chapter 3 Configuration
3.1 Station Mode
Station Mode is the default access mode for ZE 2540P.
In this mode, ZE 2540P serves as a client to receive the wireless signals to
access the Internet.
Double-click the tray icon to launch the configuration utility.
Or right click the tray icon and
select Launch Config Utility.
802.11n ireless USB Adapter
7
3.1.1 Profile
Profile can keep your favorite wireless setting among your home, office, and
other public hotspot. You may save multiple profiles and activate the one at your
preference.
Add:
to create a new profile
Edit:
to edit/modify/change parameter of an existing profile
Delete:
to delete an existing profile
Activate:
to make an existing profile become active and to connect
3.1.1.1
Add/Edit Profile
a. System Configuration
Power Save Mode:
a.
CAM
(Constantly Awake Mode) – ZE 2540P will stay power-ON as long
as the computer is connected to a power outlet.
b.
PSM
(Power Saving Mode) – ZE 2540P will hibernate when the
computer is hibernating.
802.11n ireless USB Adapter
8
Network Type:
a.
Infrastructure
– A wireless Router and/or Access Point is required.
b.
Ad-hoc
– Peer-to-Peer network, no base station required.
TX Power:
Amount of transmit power used by the radio transceiver to send out signal.
User can choose different value in the drop down menu
Preamble:
Only available under Ad-hoc mode. Value can be chose from Auto, Long, or
Short
Threshold:
Frame size when RTS/CTS handshake performs before attempt to transmit.
a.
RTS Threshold:
Default value = 2347
b.
Fragment Threshold:
Default value = 2346
b.
Authentication and Encryption
Authentication:
Open, Shared, PA(CCKM capable), PA-PSK,
PA2(CCKM capable), PA2-PSK, PA-NONE
Encryption:
None, EP, TKIP, AES, TKIP(MFP), AES(MFP).
c. 802.1X
Autres manuels pour ZEW2540P
1
Table des matières
Autres manuels Zonet Adaptateur
Zonet
Zonet ZNS8030 - V1.0 Manuel utilisateur
Zonet
Zonet ZEW2542 Manuel d'utilisation
Zonet
Zonet ZEW2500P Manuel d'utilisation
Zonet
Zonet ZEW2545 Manuel utilisateur
Zonet
Zonet ZEW2542 Manuel utilisateur
Zonet
Zonet ZEW2546 Manuel d'utilisation
Zonet
Zonet ZEW2542 Manuel utilisateur
Zonet
Zonet ZEW2500P Manuel utilisateur
Zonet
Zonet ZEW2546 Manuel utilisateur
Zonet
Zonet ZEW2590 Manuel utilisateur
Zonet
Zonet ZEW2545 Manuel d'utilisation
Zonet
Zonet ZEW1542 Manuel d'utilisation
Zonet
Zonet ZEW2547 Manuel utilisateur
Zonet
Zonet ZEW1501 - V2.0 Manuel utilisateur
Zonet
Zonet ZEW2540P Manuel d'utilisation
Zonet
Zonet ZUB6201C Manuel utilisateur
Zonet
Zonet ZEW2501 Manuel utilisateur
Zonet
Zonet ZEW2508 Manuel utilisateur
Zonet
Zonet ZRC2011 Manuel utilisateur
Zonet
Zonet ZUB6111C Manuel utilisateur
