ZKVision ZKMD470 Manuel utilisateur
User’s Manual for ZKMD4 Series Mini Dome IP
Camera
Document Version: 2.1
Date: 2012.10
Introduction
This document mainly introduces the functional features, installation process and
access methods of ZKMD4 series IPC.
Important Notices
Thanks for selecting our company’s IPC. Before use, please read through the user’s
guide to avoid any unnecessary damage!
All functions depend on the actual product. Since the product is subject to updating,
our company is not responsible for any difference from this guide and not liable for
any dispute over different technical parameters from this guide. The project is
subject to any change without notice.
To learn more, please visit our company’s website www.zkivision.com or local
office.
Table of Contents
I
Table of Contents
1 Overview ............................................................................................................... 1
1.1 Product Description..................................................................................... 1
1.2 Product Features.......................................................................................... 1
1.3 Technical Parameters................................................................................... 2
1.4 Product Appearance..................................................................................... 4
1.5 Connecting Terminal.................................................................................... 5
1.6 Basic Procedure........................................................................................... 6
2 Installation and Network Configuration ............................................................ 7
2.1 Hardware Installation................................................................................... 7
2.2 Operating Environment ..............................................................................11
2.3 Network Connection...................................................................................11
3 Accessing device...................................................................................................13
3.1 Using Browser............................................................................................13
3.2 Using RTSP Media Player..........................................................................14
3.3 Using Mobile Devices ................................................................................16
3.4 Using Video Surveillance Software............................................................18
Overview
1
1 Overview
1.1 Product Description
The ZKMD4 series mini IP cameras are specially designed for indoor application,
which feature ultraminiature, fashionable and simple appearance.
The sophisticated software and hardware design guarantees implementation of
functions and enhancement of stability, while the powerful hardware platform and
optimized H.264 coding algorithm guarantee the transmission of sharp and smooth
video effect. In addition, the built-in TF card, mobile frame detection, alarm linkage
and automatic EMAIL sending make the surveillance system to be more secure and
smart. The embedded Web server enables users to directly access the camera via
browser.
The series products can be easily installed and operated. In particular, the products
are applicable for the places requiring short distance and wide angle, such as
residence communities and stores, as well as the occasions requiring remote network
video.
1.2 Product Features
Hi3507 high-performance multimedia processor, supporting H.264 Main
Profile video coding
Dual code stream, suitable for various networks
Support all kinds of protocols, such as, TCP/IP, HTTP, TCP, UDP, ARP,
SMTP, FTP, DHCP, DNS, DDNS, NTP and UPNP, etc.
Aluminium alloy die casting design, and best dustproof and anti-corrosion
effect
Double-glass front cover for better optical isolation and mist prevention
surface for better night viewing
User’s Manual for ZKMD4 Series Mini Dome IP Camera V2.1
2
Three-layer shield +magnetic ring design to eliminate signal interference
Added functions, such as voice capture, TF card memory and reset, etc.
Support Ethernet power supply (PoE 802.3af regulation) (optional)
Double web indicator lamps for easy judgment of web status
3.6mm megapixel high definition lens
Self-recovery from abnormality and auto reconnection after network
interruption
Automatically capture images during an alarm and send them to the designated
email
Support motion detection and external detector alarm
Allow setting several alarm times and support the remote alarm linkage
Support dynamic IP (DHCP) and dynamic domain name system (DDNS)
Network time synchronization (NTP)
HD cam to support the browsing by 14 users simultaneously, 4 in primary
code stream and 10 in secondary code stream
1.3 Technical Parameters
Product Name
Mini Dome IP Camera
Product Model ZKMD470 ZKMD450 ZKMD410
Cam Properties
Image Sensor
1/3" megapixel
progressive CMOS
sensor
1/3.2" two-megapixel
progressive CMOS
sensor
1/4" two-megapixel
progressive CMOS
sensor
Image Resolution WDR HD 1280×720 HD 1280×720 Economic HD
1280×720
Lens 3.6mm fixed lens
Overview
3
Video Coding
Primary Processor
Hi3507
Operating System Embedded Linux
Video Compression
Algorithm
H.264 main profile level 3
Audio Compression
Algorithm G.726/G.711
Video Compression Code
Rate
Primary Code Stream：1024~6114 Kbits/s adjustable
Secondary Code Stream：32~512 Kbits/s adjustable
Video Resolution Primary Code Stream：1280x720
Secondary Code Stream：320x240
Video Frame Rate
1~25 frames optional
Video Parameters
WDR HD: Brightness, Saturation
, Contrast, Illumination, Sensitivity,
Shutter, Image Up/Down, Image Left/Right, Night Vision Mode and
Wide Dynamic Mode adjustable
HD: Brightness, Saturation
, Contrast, Image Up/Down, Image
Left/Right and Night Vision Mode adjustable
Economic HD: Brightness, Saturation
, Contrast, Illumination, Image
Up/Down, Image Left/Right and Night Vision Mode adjustable
Functional Interfaces
Motion Detection Allow 4 independent detection areas
Memory Support TF card for video storage and image capture, 32G maximum
(optimal)
Network Interface 10Base-T/100Base-TX Ethernet interface
Supported Network
Protocols
TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP,
DNS, DDNS, NTP, UPNP and RTSP, etc.
Working Environment
Input Power DC 12V, ≥1A
POE Ethernet power supply: comply with 802.3af regulation (optional)
User’s Manual for ZKMD4 Series Mini Dome IP Camera V2.1
4
Maximum Power
Consumption 7W
Working Temperature
-20~+55 °C
Working Humidity 10%~95%RH
Installation Mode
Wall-mounted / Ceiling mounted
1.4 Product Appearance
Stereoscopic Drawing
microphone hole
transparent cover
holes of fix
screws
lower cover
ag a
Dimensional Drawing (in mm)
Top View
Overview
5
Right View
1.5 Connecting Terminal
(1)
(2)
(3)
1. Power Interface: Connect to the adapter. This IPC employs the power supply
of DC 12V and no lower than 1A. Do not use any different power supply as it
may damage the camera.
2. Network Interface: 10/100M self-adapting Ethernet interface is used to
connect the camera with various network equipments, such as, switch, router
and hub. When it is connected to 10M network, the orange lamp is also on.
When it is connected to 100M network, the green lamp is always on.
This interface can also employ Ethernet power supply (POE, optional) and allow the
transmission of power and data through Ethernet cable.
3. Reset Button: When the camera fails to function during incorrect operation or
accidental failure (e.g. forget IP address or password), or it is used in different
scenes, press down the button for above 5s after a delay of 30s from powering
on to restore the camera to its factory default. The default user’s name is
“admin”, the default password is “admin” and the default IP address is
“192.168.1.88”.
PoE Swicth
User’s Manual for ZKMD4 Series Mini Dome IP Camera V2.1
6
1.6 Basic Procedure
(1) Unpack and check whether any component is missing;
(2) Connect the camera to computer by means of patch cable;
(3) If your computer IP is in a network section different from camera IP, please set
it to the same network section as camera IP, such as, 192.168.1.87.
(4) Log in the camera through client software or browser to check whether the
video functions normally;
(5) Adjust the code stream and other video parameters;
(6) Modify the network parameters of camera and reboot the device;
(7) Repeat Step 3;
(8) Revisit the camera through client software or browser to check till the video
functions normally;
(9) Install the camera and adjust the camera angle to the appropriate area;
(10) Visit the camera through client software or browse for video monitoring.
Installation and Network Configuration
7
2 Installation and Network Configuration
2.1 Hardware Installation
Installation Notices:
1. Read through the guide for installation prior to installation.
2. Check whether any component is missing against the packing list, if yes,
please contact your supplier.
3. Wire during power off. If the camera does not function normally during
operation, please cut off the power before check.
Do not connectcables when poweris on!
Note: The wiring during power on may seriously damage the camera, which
will be disqualified from the guarantee.
DC12V/1A
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels ZKVision Caméra IP
