IM1 M/S INSERT MASTER
IM1 Preliminary Manual 10.2017 www.zaehl.com Page 7 of 7
NOTES, SAFETY INSTRUCTIONS, WARRANTY
1.
The equipment must only be used for the purpose described in this manual.
2.
Keep the manual for further reference. When passing the equipment on, enclose the manual.
3.
Do not operate the equipment at
-
very high air humidity (>85% relative humidity)
-
high environmental temperature (>40°C) or near heat radiating equipment or objects
-
places which are exposed to solar radiation
-
very low temperatures (<5°C)
4.
Ensure appropriate air ventilation.
5.
Do not store the equipment at temperatures below -20°C or above +50°C.
6.
Do never expose the equipment to environmental conditions which can lead to water condensation.
7.
Do not expose the equipment to mechanical stress or shock.
8.
Ensure that liquids cannot get into the equipment.
9.
Ensure that foreign objects cannot get into the equipment.
10.
Only operate the equipment on a safe, legally approved, mains power supply
11.
Only clean the equipment with smooth cleaning tissues and soft detergents.
12.
Never open the equipment.
13.
In case the equipment has been dropped or there is any external or functional damage, do not continue to
operate the equipment. Have the equipment checked at your dealer’s workshop or a person who is qualified
to do such checks.
14.
When shipping, use a package which protects the equipment from environmental impact such as mechanical
shock or humidity.
15.
The equipment applies to EU directives RoHS and WEEE. Dispose separately according to WEEE. Manufacturer
WEEE register number: DE 90586269
16.
Manufacturer’s warranty covers the equipment to be free from defects of quality at the time of delivery for a
period of 24 month presumed that
-
the equipment was treated properly according to its intended use
-
all information and safety instructions given in this manual have been followed
-
the equipment shows no external damage
-
the equipment is shipped to the manufacturer or to an authorised repair-shop free of charge
-
a proof of purchase is supplied
-
a detailed failure description is supplied
The manufacturer accepts the costs of parts and labour incurred by repair. Any other costs including ship-
ping and packaging will be charged.
17.
We expressly exclude any liability for incidental or consequential damages which might arise from operating
the equipment, including failure of the equipment.
18.
All information in this manual has been carefully reviewed. It has been updated at the time of passing for
press. Nevertheless we do not accept any liability for insufficiency or errors.
19.
EEC Declaration of Conformity: The equipment applies to applicable EMC rules 2004/108/EEC.
