Z-Wave RC-100 Manuel utilisateur

RC-100

(Z-Wave Remote Controller)

Table of Contents

Introduction.................................................... 4

Glossary .......................................................... 5

RC-100 Operations ....................................... 6

Product Overview............................................. 7

Description of Function Keys.............................. 7

RC-100 User Interface Layout ......................... 8

Operations ..................................................... 10

Add/Delete Devices .......................................... 11

Device Control ................................................. 14

Scene Setup ................................................... 15

Scene Control ................................................. 18

Comfort Control .............................................. 19

Sensor Information ......................................... 20

Device Configure ............................................. 20

Scene Configure ............................................. 23

Comfort / Sensor Configure ............................. 25

Shortcut Key .................................................. 27

Z-Wave Advanced Setup ................................. 29

Learning Mode ................................................ 29

Configure Association ...................................... 31

Change Device Configuration ............................ 37

Resetting Your Network..................................... 39

System Settings .............................................. 40

Z-Wave Network Setup ................................... 43

Rediscover Network ......................................... 43

Re-scan (Rediscover) Devices from network ....... 44

Delete Dead Node from Network ....................... 46

Listening Mode................................................. 47

Create a Secondary Controller ........................... 48

Create a Primary Controller ............................... 49

WIRELESS INFORMATION ............................... 51

MAINTENANCE................................................. 51

FREQUENTLY ASKED QUESTIONS .................... 51

Z-Wave Frequently Asked Questions................... 51

TECHNICAL SPECIFICATIONS.......................... 56

CHECKING THE ACCESSORIES ......................... 57

FCC NOTICE .................................................... 57

WARNINGS...................................................... 57

CAUTION ........................................................ 58

RC-100

(Z-Wave Remote Controller)

Operating Instructions

Introduction

The RC-100 (Figure 1) is a portable Z-Wave remote controller with

multi-channel support; also it is a Z-Wave Enabled Security Controller.

It can control the secured door locks when it is in the security network.

Also, it can be configured as a primary or secondary controller within a

Z-Wave home automation network. It works with almost every Z-

Wave enabled devices, binary switches, dimmers, thermostats, secured

door locks, binary or multi-level sensors. Users can control their Z-

Wave enabled devices individually or through “Scene” control. Scene

is a collection of Z-Wave devices configured to a user-preferred

settings, levels, modes or operating conditions. The RC-100 also

equipped with a backlit LCD screen and an intelligent Self Navigated

Button (SNB) system. Users can setup and operate their Z-Wave

devices through the LCD and the SNB system using their RC-100,

and enjoy a networked, wireless home automation system anywhere at

home.

Figure 1 RC-100

Glossary

Device or Node

Devices and nodes are all terms to describe

an individual ZWave device. These are all

interchangeable when setting up your Z-

Wave network.

Inclusion Add a Z-Wave device to the network.

Exclusion Delete a Z-Wave device from the network.

Remove To take a device out of a group, scene or

association group while that device still

exists in the same Z-Wave network.

Z-Wave

Network

A collection of Z-Wave devices controlled

by primary and secondary controllers

operating on the same system. A Z-Wave

network has its own unique ID code so that

controllers not in the network cannot control

the system.

Primary

Controller

The first controller used to set up your

devices and network. Only the Primary

Controller can be used to include or delete

modules from a network. It is recommended

that you mark the primary controller for each

network for ease in modifying your network.

Secondary

Controller

A controller containing network information

about other modules within the network and

is used for controlling devices. Secondary

controller is created from the Primary

Controller and cannot include or delete

modules to the network.

Inclusion

Controller

A controller containing network information

about other modules within the network and

is used for controlling devices. Inclusion

controller is created from the Primary

Controller in a SIS enabled Z-Wave network.

Inclusion Controller has the ability to add

and remove devices from the network.

Scene

A collection of Z-Wave devices configured

to turn to a specific level, setting, mode, or

perform an operation. Scenes are usually

activated by a controller, timed event, or

specific conditions.

RC-100 Operations

Welcome to the world of Z-Wave home automation, you can use your

RC-100 to control almost every Z- Wave certified products inside

your house. The following section will guide you through the set up

processes and operation procedures for your RC-100.

Please note that all Z-Wave devices, light switches, dimmers, shutter

switches, thermostat and secured door lock made from various vendors

are compatible with your RC-100 as long as they are Z-Wave

certified or carry the following Z-Wave logo:

(Please carefully read through the following sections of this user

manual and store for future reference.)

Before using the RC-100, please install the batteries:

•4xAAA batteries are required for operation.

•Remove the battery cover on the back of your remote.

•Check the polarity of the batteries and the "+/-" marks inside the

battery compartment.

•Insert the batteries.

•Push the battery cover back in place.

LCAUTION (battery safety)

−Use new batteries of the recommended type and size only.

−Never mix used and new batteries together.

−To avoid chemical leaks, remove batteries from the remote

controller if you do not intend to use the remote for an

extended period of time.

−Dispose of used batteries properly; do not burn or bury them.

Product Overview

Figure 2 Setup and control keys of RC-100

Description of Function Keys

Keys Functions

Short cut keys for:

1. Device and scene control

2. Short cut to user selected control

Back to previous screen

4-way directional keys for setup and control

OK key for confirmation

Short cut keys LCD screen

BACK key with

backlit

Navigation + OK

s with backlit

RC-100 User Interface Layout

Home (A1)

Device (A2)

Scene (A3)

Comfort (A4)

Sensor (A5)

All Off (A6)

Devices List (A2.1)

Scenes List (A3.1)

Comforts List (A4.1)

Sensors List (A5.1)

•Press cordkeys to select control category.

•Press BACK key to go back to previous page.

•Press and hold BACK key for 2 seconds to go

back to root menu.

Control

Setup (B1)

Add Device (B2)

Delete Device (B3)

Add to Scene (B4)

Device Config. (B6)

Scene Config. (B7)

Comfort Config. (B8)

Sensor Config. (B9)

Shortcut Key (B10)

Advanced Setup (B11)

System Settings (B12)

About (B13)

Select Scene (B4.1)

Device Configure (B6.1)

Sensor Configure (B9.1)

Shortcut Key (B10.1)

Learning Mode (B11.1)

Select Scene (B5.1)

Scene Configure (B7.1)

Comfort Configure (B8.1)

Config. Assoc. (B11.2)

Configuration (B11.3)

Reset to Default (B11.4)

LCD Contrast (B12.1)

B.L. Brightness (B12.2)

Sleep Timer (B12.3)

•Press and hold ef keys simultaneously for 3

seconds to enter Setup menu.

•Press BACK key to go back to previous page.

•Press and hold BACK key for 2 seconds to go

back to root menu.

Setup

Remove fr. Scene (B5)

(remove from scene)

Operations

The RC-100 remote controller can be set up as a Primary or

Secondary Controller within a Z-Wave network.

The RC-100 can control Z-Wave devices individually or as a group

using Scene or Association. A single Z-Wave network can include 232

nodes. If necessary, more than one network can be bridged to extend

the number of nodes supported, although this is normally not needed in

a residential environment.

RC-100 control capability

Total number of controllable

End-point (EP) / device / sensor

128 items

(listed on the “Device” and “Sensor” page)

Total number of thermostats 6 thermostats

(listed on the “Comfort” page)

Total number of scenes 12 scenes (listed on the “Scene” page)

Each Scene supports up to 32 Z-Wave devices or End-point (EP)

Network Setup (C1)

Rediscover N.W. (C2)

(Rediscover network)

Delete Dead Node (C4)

Listening Mode (C5)

Re-scan Devices (C3)

•Press and hold cd keys simultaneously for 3

seconds to enter Network Setup menu.

•Press BACK key to go back to previous page.

•Press and hold BACK key for 2 seconds to go

back to root menu.

Network

Setup

Create Sec. (C6)

(

Create secondary

)

Create Pri. (C7)

(Create primary)

Autres manuels pour RC-100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Z-Wave Télécommande

Z-Wave

Z-Wave ZME_KFOB Manuel utilisateur

Z-Wave

Z-Wave ZWN-SC7 Manuel utilisateur

Z-Wave

Z-Wave RaZberry2 Manuel utilisateur

Z-Wave

Z-Wave ZRC-100 Manuel utilisateur

Z-Wave

Z-Wave RC-100 Manuel utilisateur

Z-Wave

Z-Wave Z-URC XpressZetup Manuel utilisateur

Z-Wave

Z-Wave ZRC-100 Manuel utilisateur

Z-Wave

Z-Wave ZME_KFOB2 Manuel utilisateur

Z-Wave

Z-Wave DUW 064459 Manuel utilisateur

Z-Wave

Z-Wave HSK-100Z Manuel utilisateur

Z-Wave

Z-Wave Z-URC 550EU Manuel utilisateur

Z-Wave

Z-Wave Control4 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation