Yost Vises DPV-3 Manuel utilisateur

Thank you for choosing a Yost Vise. For future reference please record the following:

Model #: DPV-3

Purchase Date: _____________

Supplier: _____________

I n s p e c t i o n a n d A c c e p t a n c e

Claims for damage, shortage or errors in shipping must be reported within one (1) day

following delivery to Buyer. Buyer shall have seven (7) days from the date Buyer

receives any products to inspect such products and services for defects and

nonconformance which are not due to damage, shortage or errors in shipping and notify

Seller, in writing, of any defects, nonconformance or rejection of such products. After

such seven (7) day period, Buyer shall be deemed to have irrevocably accepted the

products, if not previously accepted. After such acceptance, Buyer shall have no right to

reject the products for any reason or to revoke acceptance. Buyer hereby agrees that such

seven (7) day period is a reasonable amount of time for such inspection and revocation.

Buyer shall have no right to order any change or modification to any product or services

previously ordered by Buyer or its representatives or cancel any order without Seller's

written consent and payment to Seller of all charges, expenses, commissions and

reasonable profits owed to or incurred by Seller. Specially fabricated or ordered items

may not be canceled or returned, and no refund will be made. The sole and exclusive

remedy for merchandise alleged to be defective in workmanship or material would be the

replacement of the merchandise subject to the manufacturer's inspection and warranty.

Product Specifications:

1. Technical Statistics:

Model Item Jaw Jaw Pipe Throat

Number Number Width Opening Capacity Depth Weight

DPV-3 50003 3” 3” N/A 1” 6 lbs

IMPORTANT SAFETY INSTRUCTIONS

Warnings: Misuse of vises can cause serious injury to eyes, hands and or

other body parts. Vises must be set up and used properly. Before setup

and use, read, understand and follow all instructions outlined below.

ALWAYS make sure bench

tops are properly secured.

ALWAYS use proper nuts,

bolts and lock washers in all

mounting holes, to hold bench

vise down.

ALWAYS use vise of proper

size and capacity to hold work

object.

ALWAYS wear eye, face, and

ear protection when striking or

using power tools with a vise.

ALWAYS wear dust mask or

respirator when working with

wood, metal, chemical dusts

or mists.

ALWAYS wear restrictive

hair covering and anti slip

footwear while operating vise.

ALWAYS hand tighten

handles of lockdowns for

swivel base.

ALWAYS inspect vise for

stress fatigue or damage to the

vise before using.

ALWAYS maintain the vise –

grease main screw regularly.

Never use a hammer, extension

pipe, or cheater bar on spindle

handle of vise.

NEVER unscrew movable jaw

beyond maximum specified

opening of vise.

NEVER weld base of vise to any

metal object.

NEVER use a vise to press an

object into or out of another

object.

NEVER use and extension pipe to

tighten handles of lockdowns.

NEVER place pressurized

containers or combustible

materials in vise.

NEVER wear loose clothing or

jewelry while operating vise.

N E V E R apply extreme

heat or prolong heat to the vise as

it may alter structural properties.

If there is any question about a condition being safe or unsafe, do not operate the vise.

To avoid risk of personal injury, equipment damage, fire & shock, make sure work area

has the following conditions:

Floor is dry. Damp, wet or rainy conditions can cause operator to slip.

Operator must be of sufficient age to operate vise in a safe condition.

Well Lit.

Clean and unobstructed.

Workbench is properly secured to floor or wall.

Workbench is designed sufficiently to handle vise and work load (torque placed

upon the vise and workbench).

Mount Vise To Your Drill Press

Secure the Drill Press Vise to the drill press table. There are different styles of

tables requiring varying methods of securing the vise. Consult your drill press

operator’s manual for recommended securing method.

Vise Operation

Make sure vise selection (size and type) is appropriate for use and application. Larger

vises are readily available through Yost Vises. Never force or use cheater bars, pipe

extensions on the screw handle of the vise as this places excessive pressure on the vise

components and they may fail resulting in severe bodily injury.

Step 1: Make sure vise is securely mounted to the workbench.

Step 2: Make sure the swivel base lockdowns are secure.

Step 3: Open the vise by turning the vise handle counterclockwise. Do not open

beyond the vises rated capacity (jaw opening).

Step 4: Place item between the jaws of the vise.

Step 5: Close the vise by turning the vise handle clockwise until the item is snug

between the serrated jaws.

Step 6: Continue to tighten the screw handle until you can no longer move (twist) the

clamped item. Do not over tighten as this may damage item and / or the vise.

Step 7: When finished working on the item, slowly turn screw handle counterclockwise

to release the item.

Parts List

When unpacking the completely assembled vise check to make sure there are no missing

or broken parts. Call Yost Vises at (616) 396-2063 or email us at sales@yostvises.com

should a problem arise.

Parts List DPV-3 “3" Medium Duty Drill Press Vise ”

Part Description Quantity

DPV-3-01 Front Jaw and Screws 1

DPV-3-02 Rear Jaw and Screws 1

DPV-3-03 Main Screw and Handle 1

Full Version Of Terms And Conditions Of Sale

Available on-line at www.yostvises.com (select terms of sale).

Yost Vises

388 West 24th Street

Holland, MI 49423

(616) 396-2063

(616) 396-8276 Fax

www.yostvises.com

sales@yostvises.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Yost Vises Outils

Yost Vises

Yost Vises ADI-4 Manuel utilisateur

Yost Vises

Yost Vises 904-HV Manuel utilisateur

Yost Vises

Yost Vises DPV-5 Manuel utilisateur

Yost Vises

Yost Vises 750-E Manuel utilisateur

Yost Vises

Yost Vises DPV-4 Manuel utilisateur

Yost Vises

Yost Vises FSV-7 Manuel utilisateur

Yost Vises

Yost Vises ADI-8 Manuel utilisateur

Yost Vises

Yost Vises 904-AS Manuel utilisateur

Yost Vises

Yost Vises FSV-5 Manuel utilisateur

Yost Vises

Yost Vises 2503 Manuel utilisateur

Yost Vises

Yost Vises FSV-6 Manuel utilisateur

Yost Vises

Yost Vises 7WW-DI Manuel utilisateur

Yost Vises

Yost Vises 905-HV Manuel utilisateur

Yost Vises

Yost Vises 908-AS Manuel utilisateur

Yost Vises

Yost Vises 865-DI Manuel utilisateur

Yost Vises

Yost Vises ADI-6 Manuel utilisateur

Yost Vises

Yost Vises FSV-4 Manuel utilisateur

Yost Vises

Yost Vises LV-4 Manuel utilisateur

Yost Vises

Yost Vises ADI-5 Manuel utilisateur

Yost Vises

Yost Vises 880-DI Manuel utilisateur

Yost Vises

Yost Vises 10WW-RA Manuel utilisateur

Yost Vises

Yost Vises 906-HV Manuel utilisateur

Yost Vises

Yost Vises 750-DI Manuel utilisateur

Yost Vises

Yost Vises 910-HV Manuel utilisateur

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser