Yoosol Electronics PRIMO-P1 Manuel utilisateur
PRIMO- P1/p1u
Operation Manual
Rev 2.5
- 2 -
CONTENTS
1. Specifications
2. Appearance
3. Display / Operation
3-1. Operation/ Preset (Batch) mode
3-2. Operation/ Density Setting (Adjustable 5 levels)
3-3. Operation/ Change Speed
3-4. Operation/ Add mode/ Height detection mode
3-5. Operation/ UV Setting (P1U only)
3-6. Operation/ Alarm message
4. Error code / Trouble shooting
5. Configuration (User mode)
6. Accessories / Safety
- 3 -
1. Specifications
P1/ P1U (Common)
Speed
(4 Selectable speeds)
1,000 notes/min (Standard)
(800 / 1,000 / 1,250 / 1,500 notes/min)
Display
2. 8 inch Color LCD (320 x 240 Pixels)
Dimension(mm)
292(W) x 251(D) x 244(H)
Weight
Approx. 5.5Kg
Hopper/ Stacker capacity
Max. 300 notes
Feed system
Roller friction system
Sensor
IR count sensor for detecting double/chain/half notes
Interface
Serial Port
Power supply
INPUT : 100 - 240V, 50/60Hz, 0.4A
Power consumption
41 Watts
Temperature Limits
0℃ ~ +40℃
P1U (With UV detection)
Sensor
IR count sensor + UV(ultraviolet) detection (On/Off)
- 4 -
2. Appearance
No
Name
No
Name
1
Hopper Guide
6
Kicker roller
2
Side Cover
7
Gate adjustment screw
3
Display
8
Power connector
4
Hopper
9
Power Switch
5
Stacker
10
RS232 – Connect External Display(Option)
- 5 -
3. Display
Key Function Key Function
Enter PRESET Preset count
0~9 LEVEL Set notes density
Up/Down SPEED Set count speed
Mode ADD Add total count
Clear(Reset ) Restart / Back
3-1. Operation/ Preset (Batch) mode
Press “PRESET” Key
- 6 -
Select Batch number 10, 50, 100, 150, 200, 250 ~ unlimited) By PRISET Key.
Also select certain count number by Up/Down key.
Default set: 200/notes
3-2. Operation/ Density Setting (Adjustable 5 levels)
Press LEVEL Key
Default set: AUTO
- If machine count notes & show “Double error” many time, you can adjust
notes density manually by Level Key.
Density Level Double detection Description
Very low It's for high density level(dark) & thick notes
low When count middle density value notes(Level 1~2)
Middle
High
Very high
OFF Off detection Ignore the any double notes
AUTO AUTO Automatically set density Level base on first note count
When count thin & bright notes
- 7 -
3-3. Operation/ Change Speed
Adjust Speed
- Default speed : 1,000 / min
- Change speed 800/1000/1250/1500 notes / min
3-4. Operation/ Add mode
Add mode: Accumulative total of all counted bills
Height detection (S/M): Press to activate Height detection
S (single) Mode: Detect different height notes
M (Mix) Mode: Ignore different height notes
- 8 -
3-5. Operation/ UV mode – (available for P1U only)
UV detection On/ Off
- Press “CF” key to activate the UV detection (On/ Off)
3-6. Operation/ Alarm message
Alarm message
- When sound Alarm, there is Error message show up in red,
- 9 -
then machine stop the counting until clear Alarm message.
Please press “C” key to clear and counting again.
* If machine in add mode, added count value also will be clear when you press “C”
key.
4. Error code / Trouble shooting
Error code
Symptoms
Trouble shooting
Over count
Over counting
Remove notes from Hopper & Stacker
Height
Height detect
Remove notes from Stacker & Restart
Double
Double
Remove notes from Hopper & Stacker
Chain
Chain notes
Check the condition of notes as Chain
Using adjust cap to adjust thickness
Skew
Skew notes
Remove notes from Hopper and restart.
Hopper
machine
Check the hopper sensor
Check external light interference near the machine
JAM(L/R)
Note is jammed
Remove notes from Hopper& Stacker then Press Restart
Half
half note
Check the note condition as Half
UV
UV Error
Remove Suspect note, count again
- 10 -
5. Configuration (User mode)
- Press “M” key for 2~3 sec,
Select 1. User mode and Press Enter
1. LANGUAGE: Change the Country Language.
2. BUZZER: On/ Off
3. CURRENCY: Select country currency
* Programed density & depth (width) value by each country currency
4. DISPLAY: Switch Font size BIG / SMALL
Autres manuels pour PRIMO-P1
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Yoosol Electronics Compteur de billets de banque
Manuels Compteur de billets de banque populaires d'autres marques
Safescan
Safescan 2660-S Manuel utilisateur
PRO Intellect Technology
PRO Intellect Technology PRO 95U Manuel utilisateur
Dors
Dors 600 Manuel utilisateur
radiotec
radiotec rapidcount S 575 Manuel utilisateur
CUMMINS ALLISON
CUMMINS ALLISON JetScan Manuel utilisateur
PRO Intellect Technology
PRO Intellect Technology 40 NEO Manuel utilisateur
Conrad
Conrad 75 17 78 Manuel utilisateur
Total
Total M2300U Manuel de formation
Double Power Electronics
Double Power Electronics DP-8120VB Manuel utilisateur
ratiotec
ratiotec Soldi Smart Plus Manuel d'utilisation et d'entretien
Olympia
Olympia NC 455 Manuel utilisateur
Plaisio
Plaisio Q-CONNECT QCD11 Manuel utilisateur