YOODA SMART TOUCH 2 Manuel utilisateur

In order to fully explore available functions of SMART TOUCH 2 system please take a moment and read this manual before using the device. SMART

TOUCH 2 system is compatible with all YOODA brand devices.

From the top:

SMART TOUCH 2 transmitter system

Seal SMART TOUCH 2 system

Finish elements of the seal for SMART TOUCH 2 system

Transition strip with touch sensor for SMART TOUCH 2 system

1. Range:

up to 35 meters

2. Battery:

1 x CR2430

3. Power supply:

3 V

4. Dimensions of the transmitter:

40 x 65 x 17 mm

6. Transmitting power:

10 mW

7. Operating temperature:

from -20°C to 50°C

8. Protection degree:

IP 55

9. Possibility to program 3 work modes:

a) stop the work motor,

b) stop the work motor and reverse one turn

c) stop and maximum motor reverse to the upper end position

Radio receiver range is a variable value and can differ from declared values depending on conditions in which device

operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters

etc.

System SMART TOUCH 2

www.sukcesgroup.pl

1. General information

The garage door security system includes 3 working modes A,B and C. Programming the transmitter takes place after

opening the transmitter cover.

WORK MODE A - stop the work mode of the motor. After encountering an unexpected obstacle in the area of the closed

garage door or roller shutter, the system will stop automatically and immediately.

WORK MODE B - stop the work mode of the motor and reverse one turn. After encountering an unexpected obstacle in the

area of the closed garage door or roller shutter, the cover will be automatically and immediately stopped and its operation

will be reversed by one turn.

WORK MODE C - and maximum motor reverse to the upper end position. After encountering an unexpected obstacle in

the area of the closed garage door or roller shutter, the motor will automatically stop and the cover will be raised to its

upper end position.

2. Detailed description

3. Installation

4. Choosing work mode

Clamps connecting seal with the transmitter

UP button

Work mode switch

Battery

Programming button

The seal should be placed

directly in the bottom of the

roller slat or the transition strip.

Turn on one of the 3 working

modes - A, B or C or turn off the

device using the switch.

The transmitter's

power is off.

Put finish elements

on the ends of the seal.

The finish element

of the seal connect

to the transmitter.

LImiter of the transmitter should

be placed with the door closed in

a position parallel to the transmitter

at a distance T (T <25 mm).

The transmitter's

power is on.

A work mode. B work mode. C work mode.

5. Adding transmitter to R type motors

6. Adding transmitter to R type motors using the key-ring remote control

Longer than 5 seconds pause between series of button clicks during programming will cause device to switch off from

programming mode without saving any changes.

Motor will make a sound.

Roller shutter will make

an up/down move.

Motor will

make a sound.

Roller shutter

will make

an up/down move

and the motor

will make a few

short sounds.

Press

programming button

P2 on the A

remote control.

Press

programming button

P2 on the A

remote control.

Press

programming button

P2 on the B transmitter.

Motor will make a sound.

Roller shutter will make

an up/down move.

Motor will

make a sound.

Roller shutter

will make

an up/down move

and the motor

will make a few

short sounds.

Press

simultaneously

STOP and UP buttons.

Press

simultaneously

STOP and UP buttons.

Press

programming button

P2 on the B transmitter.

Transmitter

has been

programmed.

Transmitter

has been

programmed.

1. Simultaneously pressing the STOP and UP buttons performs the function of programming button.

2. Longer than 5 seconds pause between series of button clicks during programming will cause device to switch off from

programming mode without saving any changes.

Autres manuels YOODA Télécommande

YOODA

YOODA MELODY 1R Manuel utilisateur

YOODA

YOODA LINEO Series Manuel utilisateur

YOODA

YOODA 1711190 Manuel utilisateur

YOODA

YOODA MELODY Series Manuel utilisateur

YOODA

YOODA ARTISTIC 5R Manuel utilisateur

YOODA

YOODA UNO Series Manuel utilisateur

YOODA

YOODA VITO Series Manuel utilisateur

YOODA

YOODA ARTISTIC-1R Manuel utilisateur

YOODA

YOODA NUXO Series Manuel utilisateur

YOODA

YOODA VETRO 5RT Manuel utilisateur

YOODA

YOODA MAGNETIC PRO 1RT YSH Manuel utilisateur

YOODA

YOODA MAGNETIC Deluxe Series Manuel utilisateur

YOODA

YOODA SVERO Series Manuel utilisateur

YOODA

YOODA ARTISTIC 1R Manuel utilisateur

YOODA

YOODA 28LEQ Series Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation