YOKOGAWA UTAdvanced UT32A Manuel

Setup Procedure

UTAdvanced Quick Setting

(Controlling Flow with Inverters)

TI 04L01L01-04EN

Foreword

The contents of this document are subject to change without prior notice as a result of improvements in performance or functionality.

Copying or reproduction by any means of all or any part of the contents of this document without permission is strictly prohibited.

Use of this document is at the users risk.

This document is subject to change without notice. TI04L01L01-04EN

2011.12.16 1st Edition (YK)

Technical

Information

■Overview

This is an example of wiring and settings using the UTAdvanced Quick Setting function for "flow control

with inverters." For more details, see the user's manual.

■Relevant models

Standard models of the UT32A, UT35A, UT52A, and UT55A.

■System

■Wiring

Current output

4–20 mA

Current input 4–20 mA

0.0–10.0 m3/h

RUN/STOP

Stops at ON

Power board

Inverter

Electromagnetic

flow meter

Inverter

Power

supply

Current output

4–20 mA

OUT

＋

－

Pump Interlock

Operation stops at DI2=ON

Operation starts at DI2=OFF

Di2

COM

100–240 VAC power supply

Current input 4–20 mA

Electromagnetic

flow meter

＋

－

2/4

This document is subject to change without notice. TI 04L01L01-04EN 2011.12.16-00

■Settings

To set PID control, the input signal (4 to 20 mA), and current control output (4 to 20 mA), set the following

parameters.

(1) Select the desired parameter with the UP or DOWN key

(2) Press SET/ENTER (the setting value blinks)

(3) Change the setting with the UP or DOWN key

(4) Press SET/ENTER to set the new value (the setting value stops blinking but remains

bright)

●Redoing the Quick Setting

Once functions are configured with the Quick Setting, the Quick Setting function

will not appear after you restart. However, you can redo the Quick Setting by

following the procedure below.

(1) Set the Quick Setting parameter QSM to ON, and re-engage power

(2) Set the PV input type parameter IN to OFF, and re-engage power

Press SET/ENTER to accept the "YES" option.

Quick Setting starts

First, the control type parameter CNT appears.

Set CNT (control type) to PID (initial value).

OFF is displayed for IN (the PV input type).

Set IN (PV input type) to current signal: 4–20.

(4–20 = 4.00 to 20.00 mA)

Set UNIT (PV input unit) to – (none).

If necessary, use the unit label [m3/h].

CONTRＯＬＴYPE

ＳＴＡＲＴＱＵＩＣＫ

ＳＥＴＴＩＮＧ

QSM YES

CNｔPID

PV INPUT TYPE

IN OFF

PV INPUT TYPE

IN 4ー20

PV INPUT UNIT

UNIｔー

CONTRＯＬＴYPE

ＳＴＡＲＴＱＵＩＣＫ

ＳＥＴＴＩＮＧ

QSM YES

CNｔPID

PV INPUT TYPE

IN OFF

PV INPUT TYPE

IN 4ー20

PV INPUT UNIT

UNIｔー

Power

Quick Setting

start

3/4

This document is subject to change without notice. TI 04L01L01-04EN 2011.12.16-00

Set RH (maximum value of PV input range) to 20.00 mA (the initial value).

Set RL (minimum value of PV input range) to 4.00 mA (the initial value).

Set SDP (PV input scale decimal point position) to 1.

Set SH (maximum value of PV input scale) to 10.0 (10.0 m3/h).

Set SL (minimum value of PV input scale) to 0.0 (0.0 m3/h).

Set OT (output type selection) to 00.02: OUT terminal (current 4 to 20 mA).

Skip this parameter (not relevant).

Finally, EXIT is displayed. Select YES and press SET/ENTER to complete the

basic function setup and return to the operating screen. Or, you can select NO

to continue with the Quick Setting.

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 20.00

11.

FINISH

13.

EXIｔYES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 4.00

CONTROL OUTPUT

CYCLE TIME

12.

Cｔ30.0

OUTPUT TYPE

SELECTION

0ｔ00.02

SｄP1

10.

SH 10.0

PV INPUT SCALE DECIMAL

POINT POSITION

MAXIMUM VALUE OF

PV INPUT SCALE

SL 0.0

MINIMUM VALUE OF

PV INPUT SCALE

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 20.00

11.

FINISH

13.

EXIｔYES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 4.00

CONTROL OUTPUT

CYCLE TIME

12.

Cｔ30.0

OUTPUT TYPE

SELECTION

0ｔ00.02

SｄP1

10.

SH 10.0

PV INPUT SCALE DECIMAL

POINT POSITION

MAXIMUM VALUE OF

PV INPUT SCALE

SL 0.0

MINIMUM VALUE OF

PV INPUT SCALE

4/4

This document is subject to change without notice. TI 04L01L01-04EN 2011.12.16-00

Revision Information

Document name: Setup Procedure: UTAdvanced Quick Setting (Controlling Flow with Inverters)

Document number: TI 04L01L01-04EN

First edition: December, 2011

Newly released

Autres manuels pour UTAdvanced UT32A

Ce manuel convient aux modèles suivants

Autres manuels YOKOGAWA Contrôleurs

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Manuel d'installation et d'exploitation

YOKOGAWA

YOKOGAWA STARDOM FCN-500 Manuel utilisateur

YOKOGAWA

YOKOGAWA CX1000 Manuel utilisateur

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Manuel

YOKOGAWA

YOKOGAWA TC 10-L Manuel utilisateur

YOKOGAWA

YOKOGAWA UP35A Manuel utilisateur

YOKOGAWA

YOKOGAWA UTAdvanced UT52A Manuel

YOKOGAWA

YOKOGAWA DYNASERV DM Series Manuel utilisateur

YOKOGAWA

YOKOGAWA MC43 Manuel utilisateur

YOKOGAWA

YOKOGAWA SMARTDAC+ GX20 Manuel utilisateur

YOKOGAWA

YOKOGAWA YS170 Manuel utilisateur

YOKOGAWA

YOKOGAWA Revolution FA-M3 R Manuel

YOKOGAWA

YOKOGAWA UTAdvanced UT52A Manuel utilisateur

YOKOGAWA

YOKOGAWA UT350 Manuel utilisateur

YOKOGAWA

YOKOGAWA CX2000 Mode d’emploi

YOKOGAWA

YOKOGAWA UTAdvanced UT32A Manuel

YOKOGAWA

YOKOGAWA Fluidcom S2 Manuel utilisateur

YOKOGAWA

YOKOGAWA UTAdvanced UT32A Manuel utilisateur

YOKOGAWA

YOKOGAWA UTAdvanced UP55A Manuel utilisateur

YOKOGAWA

YOKOGAWA UT32A-D/MDL Manuel utilisateur

YOKOGAWA

YOKOGAWA UT351 Manuel utilisateur

YOKOGAWA

YOKOGAWA YS1000 Series Manuel utilisateur

YOKOGAWA

YOKOGAWA UP150 Manuel utilisateur

YOKOGAWA

YOKOGAWA UP750 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur