Yoko Technology RYK-IP2280 Manuel utilisateur

IP CAMERA

User Manual

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN!

CAUTION :

TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT OPEN COVERS (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING: This symbol is intended to alert the user to the presence of

un-insulated “dangerous voltage”.

CAUTION: This symbol is intended to alert the user to presence of important

operating and maintenance (Servicing) instructions in the literature

accompanying the appliance.

Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate

collection systems).

This symbol on the product or on its packaging indicates that this product shall not be

treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By ensuring

this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed information about recycling

of this product, please contact your local city office, your household waste disposal

service or the shop where you purchased the product. The power cord is the main

power connection. Therefore, constantly plug and unplug of the power cord might

result in malfunction of the product.

Do not install the product in an environment where the humidity is high.

Unless the product is waterproof or weatherproof, otherwise it can cause the image

quality to be poor.

Do not drop the product or subject them to physical shocks.

Except for vandal-proof or shockproof product, otherwise it will result malfunctions to

occur.

Never keep the product to direct strong light.

It can damage the product.

Do not spill liquid of any kind on the product.

If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that

corrode the electronic components.

Do not expose to extreme temperatures.

Use the product at temperatures within 5℃~ 45℃.

It is advised to read the Safety Precaution Guide through carefully before

operating the product, prevent any possible danger.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

To comply with the FCC RF exposure compliance requirements, this device and its

antenna must not be co-located or operating to conjunction with any other antenna or

transmitter.

This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

This equipment has been tested and found to comply with the limits for a Class B

Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference

to radio communication. However, there is no grantee that interference will not occur

in a particular installation. If this equipment dose cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on ,

the user is encouraged to try to correct the interference by one or more of the

following measures

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

CONTENTS

1. INTRODUCTION......................................................................................... 1

1.1 Product Introduction.............................................................................. 1

1.2 Application............................................................................................ 1

2. FEATURES ................................................................................................. 2

3. PACKING LIST............................................................................................ 3

4. INSTALLATION ........................................................................................... 4

4.1 Software Installation ............................................................................. 4

4.2 System Configuration ........................................................................... 7

4.3 Suggested Computer Equipment.......................................................... 7

5.LocationandControl......................................................................................... 8

5.1 Front Panel........................................................................................... 8

5.2 Rear Panel............................................................................................ 9

6. IP CAMERA SETUP.................................................................................. 10

6.1 Connect to IP Camera........................................................................ 10

6.2 On the LAN using Discoverer ............................................................. 11

6.3 IE Connection..................................................................................... 13

6.4 Install ActiveX..................................................................................... 13

7. FUNCTION SETUP................................................................................... 18

7.1 Home Page......................................................................................... 18

7.2 Date/ Time Settings............................................................................ 20

7.2 Date/ Time Settings............................................................................ 21

7.3 Name Settings.................................................................................... 22

7.4 IP Settings .......................................................................................... 23

7.5 Wireless Network Settings.................................................................. 24

7.6 Video Settings..................................................................................... 26

7.7 Motion Detection Windows ................................................................. 29

7.8 Alarm Settings .................................................................................... 30

7.9 IR LED Control.................................................................................... 32

7.10 SD Card File Management ............................................................... 33

7.11 SMTP Settings.................................................................................. 35

7.12 FTP Settings..................................................................................... 36

7.13 Account Settings............................................................................... 37

7.14 PT Control......................................................................................... 38

7.15 System Settings................................................................................ 40

7.16 Restore Factory Default.................................................................... 41

7.15 Reboot.............................................................................................. 41

7.18 Firmware Update .............................................................................. 42

9. 3G MOBILE PHONE MONITORING......................................................... 44

10. SPECIFICATION..................................................................................... 46

11. APPENDIX............................................................................................... 48

Theauthorassumesnoresponsibilityforanyerrorsoromissionsthatmayappear inthis

documentnordoes theauthormakeacommitmenttoupdatetheinformationherein.

VER.: 1.0, CD

1. INTRODUCTION

1.1 Product Introduction

The Day & Night (optional) IP Camera is a high performance camera, with

simple connection- no PC required. It can be viewed and controlled from the

PC site using the IE browser or apply the free bundled 16-CH viewing software,

to enable real-time remote site control and supports 3GPP for mobile

surveillance. Efficient real-time observation, recording and image capture can

occur simultaneously.

The camera uses Mpeg-4 and Mjpeg compression technology to provide

quality image, stable and smooth Mpeg-4 streams. Requires less hard drive

space, saves motions on the SD card or by e-mail notification to enable the

most up-to-date information.

lexible online connection methods: LAN,

PPPOE, and DDNS.

1.2 Application

The product is for indoor use only.

Security:

ATM (auto teller machine), bank, gas station, shop, and parking lot.

Factory/ Office:

Factory, warehouse, remote technology support, and conference room.

Home:

Indoor, Elevator, doorway, community safety, and hotel.

Hospital/ Kindergarten:

Hospital and isolated ward, home for the aged, kindergarten, and baby

nourishing center.

2. FEATURES



Compact size Pan/Tilt IP camera, support Preset/Auto-pan functions.



CMOS camera with VGA Resolution.



Flip and mirror the videos and overlay time, date or text.



Built-in MPEG4/ MJPEG compression format and VGA/ QVGA video

resolution.



Built-in 3GPP video compression format and QQVGA video resolution.



Adjustable image quality, resolution and frame rate settings.



Support remote-site recording, frame capture, and motion detection

notification.



Motion Detection with maximum 3 detection areas and 5 sensitivity level

setups.



SD card allowing motion- event data local storage, remote storage or

delete, and SD card formation.



Motion detection event-triggered alarm notification via e-mail (alarm

images can be sent with e-mail as attachments) or FTP server forwarding

(images).



Network Protocol：HTTP, DNS, SMTP, FTP, NTP, DHCP, PPPoE, DDNS,

and RTP/ RTSP.



Built-in microphone for one-way or two-way audio.



Auto search software for LAN connected IP camera.



Power-loss or video-loss, designed to reboot and online reconnection.



Explorer application software for easy monitoring, recording and setting.



Simultaneously display and record live videos from multiple cameras (up

to 16CH) on a single PC.



Live Video via 3G mobile phone surveillance application.



Superior low light performance.



Easy to install and configure.

Optional Functions:



Built-in 7 pieces IR LED, supports remote-site Manual/ Schedule control

(ON/ OFF). With two-stage filter, 400 – 650nm visible spectrum and

800 – 900nm infrared spectrum Band Pass.



Support 802.11 b/g wireless functions.

3. PACKING LIST

Check to make sure all of the items shown below are included in your product

package. If something is missing, contact your dealer as soon as possible.

Item

Item Description Item Picture Qty.

1 IP camera

(Option Function: Wireless and

IR LED)

2 Camera Stand

3 Power Adaptor

Input：100~240V

Output：12V / 1A

4 Network Cable

5 DI/DO Cable 1

6 Quickstart Guide

7 CD-ROM

4. INSTALLATION

4.1 Software Installation

Please use the enclosed CD-ROM to precede the IP CAM Viewer software

and follow the procedures to setup the software’s below:



Local LAN IP camera search Software (Discoverer).



IE Browser ActiveX Compression Software (New ActiveX software updates

may be directlydownloaded by the IP camera).



16CH IP Camera Viewing Software (IP CAM Viewer).

Setup Wizard start window:

Select Destination Location.

The default folder is C:\Program Files\IP CAM Viewer.

Select Start Menu Folder. The default folder is IP CAM Viewer.

Select if you want to create a desktop icon or not.

Click “Install” button to start installation process.

Installation completed.

Table des matières

Autres manuels Yoko Technology Caméra IP

Yoko Technology

Yoko Technology RYK-IPBX100 Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur