Yoda VP200 Manuel utilisateur
IP Phone user Guide
-1-
Appearance
1. Front Panel
fig 1.1 Front Panel
1. Network Light 2. Logon Light3. Service IP
4. Local IP 5.Local num 6. Vol/+ 7. Vol/-
8.Number 9. Phone Book 10. Back Space
11.Redial 12. Spk 13. Missed
14.Answered 15. Dialed 16Flash
17. Transfer 18. Hold 19Handset
2. Backside view
-2-
fig 1.2 Backside view
Performance and Features
ØFeaturesFeatures
ØHardwareHardware
Main chipPA1688 50MHz
Data Memory2MB SDRAM
Program Memory2 MB Flash memory
Ethernet Port2X 10/100M Connectors
AC/DC adapterInput AC100--- 230VOutput 9V DC, 1A
ØSoftwareSoftware
DHCP support for LAN or Cable modem
PPPoE support for ADSL or Cable modem
Set phone by HTTP web browser or Telnet
Upgrade by FTP(TFTP optional)
Support major G.7XX ;GSM610 audio codec
VAD(Voice active detect)
-3-
CNG (Comfort noise generation)
Dynamic voice jitter buffer
G.167/165 compliant 16ms echo cancellation
Tone generation and Local DTMF re-generation according with ITU-T
Support the Inband audio; RFC2833; SIP INFO etc DTMF transmission
method
E.164 dial plan and customized dial rules
100 entries for speed dial
80 entries each for missed calls, answered calls and dialed calls
Adjustable volume for both handset and speaker
Voice prompt
Hotline
Support adjustable user password and super password
ØStandardStandard and Protocoland Protocol
SIPSIP PhonePhone supportssupports following standard and protocol:following standard and protocol:
IEEE 802.3 /802.3 u 10 Base T / 100Base TX
Major G.7XX; GSM610 audio codec
SIP RFC3261
TCP/IP: Internet transfer and control protocol
RTP: Real-time Transport Protocol
RTCPReal-time Control Protocol
-4-
VAD/CNG save bandwidth
DHCPDynamic Host Configuration Protocol
PPPoEPPP Protocol over Ethernet
DNSDomain Name Server
TelnetInternet's remote login protocol
FTPFile Transfer protocol
TFTPFile Transfer protocol (optional)
HTTPHyper Text Transfer protocol
ØOperating requirements:Operating requirements:
Operation temperature: 0 to 50C (32to 122F)
Storage temperature: -30to 65C ( -22to 149F)
Humidity: 10 to 90% no dew
ØElectric requirementsElectric requirements::
Voltage: 9V DC
Power: 9W (max.)
Power adapter: AC/DC input 100-230VOutput 9V 1A
Network interface:2X RJ-45 Ethernet Connectors
ØSizeSize
195 x 175 x 85 mm (L x W x H)
-5-
Phone keypad set
When IP phone has been installed properly, you can enter the menu
through the keyboard and LCD, and then set each parameteraccordingly.
Function Keys Introduction:
Keys Function
Service IP With handset hung, press this key to get the GK IP address
Local IP With handset hung, press this key to get phone IP address
Local Number With handset hung, press this key to get phone number
Volume+
Increase the volumes of handset or speaker; turn over the
record backward
Volume-Decrease
the volumes of handset or speaker; turn over the
record forward
Redial While reviewing missed, received or dialed number, press this key to dial current
number.
Spk Press this key to have a call without lifting the handset
Dialed With handset hung, press this key to review dialed number
Answered With handset hung, press this key to review received number
Missed With handset hung, press this key to review missed number
When using keyboard and LCD to configure the settingsof IP phone,
following keys will be employed:
OOperate with the keysperate with the keys
Enter the menu modeEnter the menu mode
Use the keypad to enter the password of the phone (when debug is
-6-
not set as0[disable], default password is 1234; when debug is set
as 0[disable], please use super password 19750407), and then
press#, till thes Password is displayed. Then
enter the password again and press Spk to let the phone enter
setting mode.
SSelect the submenuelect the submenu
After entering the main menu, press VOL+ or VOL- to page the
menu up or page the menu down; when you want to set the submenu item
to be displayed, press Spk to enter the submenu.
Enter the EDIT modeEnter the EDIT mode
After entering the submenu, when you want to set the submenu item to
be selected, press Local IP to enter EDIT mode.
EEnter the settingsnter the settings
Once the phone enters EDITmode, enter the settings bynumeric keypad
respectively, then press Spk key to confirm.
MModifodify enter errory enter error
If the errors come forth when you enter the settings, pressBackspace
key to delete it and enter the settings again
Abort the settingsAbort the settings
If there is no need for the modified settings, press Redial key
to return to the main menu, and press VOL+ or VOL- to page
the menu up or page the menu down; When exit settingssubmenu item
password:
-7-
is selected, press Spk key to confirm, IP phone will reboot and
be used the current settings.
Save the settingsSave the settings
When all parameters have modified, press Redial key to return to
the main menu, and press VOL+ or VOL- to page the menu up or
page the menu down; When save settingssubmenu item is selected,
press Spk key to confirm, IP phone will reboot and use the already
modified setting.
Introduce of the function of keypad in the keypad setting mode
Press key Function
Spk /Hand free Enter
into submenu of the current
menu ;Acknowledge to modification
Volume/+ Scroll menu forward
Volume/-Scroll menu backward
Local IP Enter into modification status
Redial Cancel current setting ; restore to its father
catalogue
Back Space Backspace during the setting
Number keypad
Input updating content according to
require. Please see appendix for character
represented by each key
-8-
ØSet the main menuSet the main menu
Main Menu StructureMain Menu Structure
Fig 2.1 Main Menu structure Illustration
ØSet the network submenuSet the network submenu
Network Submenu StructureNetwork Submenu Structure
Fig 2.2 Network submenu structure Illustration
ØSet the audio submenuSet the audio submenu
Audio Submenu StructureAudio Submenu Structure
-9-
Fig 2.3 Audio submenu structure Illustration
ØSet the dial plan submenuSet the dial plan submenu
Dial plan submenu StructureDial plan submenu Structure
Fig 2.4 Dial plan submenu structure Illustration
ØSet the protocol menuSet the protocol menu
Protocol Submenu StructureProtocol Submenu Structure
Autres manuels pour VP200
1
Table des matières
Autres manuels Yoda Téléphone IP
