Yeastar Technology YEALINK Manuel utilisateur

Yealink IP Phone Configuration Guide

Version 1.0

Date: 2016.09.12

Yeastar Information Technology Co. Ltd.

Yealink IP Phone Configuration Guide

2/8

Introduction

This guide introduces how to configure Yealink IP phones with Yeastar S-Series VoIP

PBX. You have multipleways to configure the Yealink phone:

Registering to Yeastar S-Series Manually

Provisioning Yealink Phones via PnP (Recommended)

Provisioning Yealink Phones via DHCP

Supported Phone Models

Yealink T19P-E2

Yealink T2 Series: T21P-E2, T23G, T23P, T27G, T29G

Yealink T4 Series: T40P, T41P, T42P, T46P, T48P, T49P

Yealink W52P, W56P

Note: different IP phone firmware versions may have different web GUI with

different settings.

Yealink IP Phone Configuration Guide

3/8

Registering to Yeastar S-Series Manually

If you choose registering Yealink to Yeastar S-Series manually, you have to log in

each phone, and configure one by one.

1. Log in the Yealink IP phone web user interface.

Username: admin

Password: admin

2. Click “Account” Tab.

Account: choose one account.

Line Active: Enabled

Label: set the name you want to appear on the phone display.

Display Name: set the name you want to appear on other phone’s display

when calling other phones.

Register Name: fill in the extension’s “Register Name”.

User Name: fill in the extension number.

Yealink IP Phone Configuration Guide

4/8

Password: fill in the extension’s “Registration Password”.

Server Host: fill in Yeastar S-Series PBX’s IP address.

3. Click “Confirm”.

4. Check the extensions status. If the extension is registered to Yeastar S-Series

successfully, the “Register Status” will show “Registered”.

Yealink IP Phone Configuration Guide

5/8

Provisioning Yealink Phones via PnP

Before provisioning the phones, you must reset the phones to factory defaults in case

that the phones have residual settings of a previous configurations.

1. Connect the phone to the same network with Yeastar S-Series PBX. The phone

will send a PnP request to the PBX when booting up.

2. Log in Yeastar S-Series Web interface, go to “Auto Provisioning” App. Click “Scan”,

all the phones in the local network will show up on the page.

3. Search the phone by MAC address or IP address, and click “edit”.

4. Choose the phone Model, active a line and assign an extension for the phone.

You can also configure keys, features, preferences and codec for the phone.

5. Click “Save”.

6. The system prompts you to reboot the phone, click “OK”. The phone will reboot

and configure automatically.

Yealink IP Phone Configuration Guide

6/8

Provisioning Yealink Phones via DHCP

Before provisioning the phones, you must reset the phones to factory defaults in case

that the phones have residual settings of a previous configurations.

1. Connect the phone to the same network with Yeastar S-Series PBX.

2. Disable local DHCP server in your local network, e.g. disable DHCP server on

Linksys router.

3. Enable DHCP server on Yeastar S-Series and configure the DHCP server settings

according to your local network. (Settings > System > Security > Service)

Yealink IP Phone Configuration Guide

7/8

4. Go to “Auto Provisioning” App. Click “Scan”, all the phones in the local network will

show up on the page.

5. Search the phone by MAC address or IP address, and click “edit”.

6. Choose the phone Model, active a line and assign an extension for the phone.

You can also configure keys, features, preferences and codec for the phone.

Yealink IP Phone Configuration Guide

8/8

7. Click “Save”.

8. The system prompts you to reboot the phone, click “OK”. The phone will reboot

and configure automatically.

Table des matières

Autres manuels Yeastar Technology Téléphone IP

Yeastar Technology

Yeastar Technology HTEK Manuel utilisateur

Yeastar Technology

Yeastar Technology Escene Manuel utilisateur

Yeastar Technology

Yeastar Technology Fanvil Manuel utilisateur

Yeastar Technology

Yeastar Technology Tiptel 31 Manuel utilisateur

Yeastar Technology

Yeastar Technology GRANDSTREAM GXP Series Manuel utilisateur

Yeastar Technology

Yeastar Technology Fanvil Manuel utilisateur

Yeastar Technology

Yeastar Technology Digium Manuel utilisateur

Yeastar Technology

Yeastar Technology Fanvil Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur