YASKAWA MOTOMAN-MH5 Manuel utilisateur

MANUAL NO.

HW0485750

Part Number: 171469-1CD

Revision: 1

MOTOMAN-MH5

INSTRUCTIONS

TYPE:

YR-MH00005-C00 (STANDARD SPECIFICATION DX100)

YR-MH0005N-C00 (STANDARD SPECIFICATION NXC100)

Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and retain

for future reference.

MOTOMAN INSTRUCTIONS

MOTOMAN-MH5 INSTRUCTIONS

DX100 INSTRUCTIONS

DX100 OPERATOR’S MANUAL

DX100 MAINTENANCE MANUAL

NXC100 INSTRUCTIONS

NX100 OPERATOR’S MANUAL

NXC100 MAINTENANCE MANUAL

The DX/NX100 Operator’s Manuals above correspond to specific usage.

Be sure to use the appropriate manual.

1 of 74

171469-1CD

HW0485750

MH5

customers to assist in the operation of Motoman robots, related equipment

and software This manual is copyrighted property of Yaskawa and may

not be sold or redistributed in any way. You are welcome to copy this

document to your computer or mobile device for easy access but you may

not copy the PDF files to another website, blog, cloud storage site or any

other means of storing or distributing online content.

Printed in the United States of America

First Printing, 2014

Yaskawa America, Inc.

Motoman Robotics Division

100 Automation Way

Miamisburg, OH 45342

Phone: 937-847-6200

www.motoman.com

2 of 74

iii

171469-1CD

HW0485750

MH5

MANDATORY

• This instruction manual is intended to explain mainly on the

mechanical part of the MOTOMAN-MH5 for the application to the

actual operation and for proper maintenance and inspection. It

describes on safety and handling, details on specifications,

necessary items on maintenance and inspection, to explain

operating instructions and maintenance procedures. Be sure to

read and understand this instruction manual thoroughly before

installing and operating the manipulator.

• General items related to safety are listed in the Chapter 1: Safety of

the DX100/NXC100 instructions. To ensure correct and safe

operation, carefully read the DX100/NXC100 instructions before

reading this manual.

CAUTION

• Some drawings in this manual are shown with the protective covers

or shields removed for clarity. Be sure all covers and shields are

replaced before operating this product.

• The drawings and photos in this manual are representative

examples and differences may exist between them and the

delivered product.

• YASKAWA may modify this model without notice when necessary

due to product improvements, modifications, or changes in

specifications.

If such modification is made, the manual number will also be

revised.

• If your copy of the manual is damaged or lost, contact a YASKAWA

representative to order a new copy. The representatives are listed

on the back cover. Be sure to tell the representative the manual

number listed on the front cover.

• YASKAWA is not responsible for incidents arising from unauthorized

modification of its products. Unauthorized modification voids your

product’s warranty.

3 of 74

171469-1CD

HW0485750

MH5

We suggest that you obtain and review a copy of the ANSI/RIA National

Safety Standard for Industrial Robots and Robot Systems (ANSI/RIA

R15.06-2012). You can obtain this document from the Robotic Industries

Association (RIA) at the following address:

Robotic Industries Association

900 Victors Way

P.O. Box 3724

Ann Arbor, Michigan 48106

TEL: (734) 994-6088

FAX: (734) 994-3338

www.roboticsonline.com

Ultimately, well-trained personnel are the best safeguard against

accidents and damage that can result from improper operation of the

equipment. The customer is responsible for providing adequately trained

personnel to operate, program, and maintain the equipment. NEVER

ALLOW UNTRAINED PERSONNEL TO OPERATE, PROGRAM, OR

REPAIR THE EQUIPMENT!

We recommend approved Yaskawa training courses for all personnel

involved with the operation, programming, or repair of the equipment.

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications.

4 of 74

171469-1CD

HW0485750

MH5 Notes for Safe Operation

Notes for Safe Operation

Read this manual carefully before installation, operation, maintenance, or

inspection of the MOTOMAN-MH5.

In this manual, the Notes for Safe Operation are classified as “DANGER”,

“WARNING”, “CAUTION”, “MANDATORY”, or “PROHIBITED”.

Even items described as “CAUTION” may result in a serious accident in

some situations.

At any rate, be sure to follow these important items.

DANGER

Indicates an imminent hazardous

situation which, if not avoided, could

result in death or serious injury to

personnel.

WARNING

Indicates a potentially hazardous

situation which, if not avoided, could

result in death or serious injury to

personnel.

CAUTION

Indicates a potentially hazardous

situation which, if not avoided, could

result in minor or moderate injury to

personnel and damage to equipment.

It may also be used to alert against

unsafe practices.

MANDATORY

Always be sure to follow explicitly the

items listed under this heading.

PROHIBITED

Must never be performed.

NOTE

To ensure safe and efficient operation at all times, be sure

to follow all instructions, even if not designated as

“DANGER”, “WARNING” and “CAUTION”.

DANGER

• Maintenance and inspection must be performed by specified

personnel.

Failure to observe this caution may result in electric shock or injury.

• For disassembly or repair, contact your YASKAWA representative.

• Do not remove the motor, and do not release the brake.

Failure to observe these safety precautions may result in death or

serious injury from unexpected turning of the manipulator's arm.

5 of 74

Notes for Safe Operation

171469-1CD

HW0485750

MH5

WARNING

• Before operating the manipulator, check that servo power is turned

OFF pressing the emergency stop buttons on the front door of the

DX100/NXC100 and the programming pendant.

When the servo power is turned OFF, the SERVO ON LED on the

programming pendant is turned OFF.

Injury or damage to machinery may result if the emergency stop circuit

cannot stop the manipulator during an emergency. The manipulator

should not be used if the emergency stop buttons do not function.

Figure 1: Emergency Stop Button

• Once the emergency stop button is released, clear the cell of all

items which could interfere with the operation of the manipulator.

Then turn the servo power ON.

Injury may result from unintentional or unexpected manipulator motion.

Figure 2: Release of Emergency Stop

TURN

• Observe the following precautions when performing teaching

operations within the P-point maximum envelope of the

manipulator:

– Be sure to use a lockout device to the safeguarding when going

inside. Also, display the sign that the operation is being

performed inside the safeguarding and make sure no one closes

the safeguarding.

– View the manipulator from the front whenever possible.

– Always follow the predetermined operating procedure.

– Keep in mind the emergency response measures against the

manipulator’s unexpected motion toward you.

– Ensure that you have a safe place to retreat in case of

emergency.

Improper or unintended manipulator operation may result in injury.

• Confirm that no person is present in the P-point maximum envelope

of the manipulator and that you are in a safe location before:

– Turning ON the power for the DX100/NXC100.

– Moving the manipulator with the programming pendant.

– Running the system in the check mode.

– Performing automatic operations.

Injury may result if anyone enters the P-point maximum envelope of the

manipulator during operation. Always press an emergency stop button

immediately if there is a problem.

The emergency stop buttons are located on the right of front door of the

DX100/NXC100 and the programming pendant.

6 of 74

vii

171469-1CD

HW0485750

MH5 Definition of Terms Used In this Manual

Definition of Terms Used In this Manual

The MOTOMAN is the YASKAWA industrial robot product.

The MOTOMAN usually consists of the manipulator, the controller, the

programing pendant, and supply cables.

In this manual, the equipment is designated as follows:

CAUTION

• Perform the following inspection procedures prior to conducting

manipulator teaching. If problems are found, repair them

immediately, and be sure that all other necessary processing has

been performed.

– Check for problems in manipulator movement.

– Check for damage to insulation and sheathing of external wires.

• Always return the programming pendant to the hook on the cabinet

of the DX100/NXC100 after use.

The programming pendant can be damaged if it is left in the

manipulator's work area, on the floor, or near fixtures.

• Read and understand the Explanation of Warning Labels in the

DX100/NXC100 Instructions before operating the manipulator:

Equipment Manual Designation

DX100/NXC100 Controller DX100/NXC100

DX100/NXC100 Programing Pendant Programing Pendant

Cable between the manipulator and the

controller

Manipulator Cable

7 of 74

Description of the Operation Procedure

viii

171469-1CD

HW0485750

MH5

Description of the Operation Procedure

In the explanation of the operation procedure, the expression “Select • • •”

means that the cursor is moved to the object item and the SELECT key is

pressed, or that the item is directly selected by touching the screen.

Registered Trademark

In this manual, names of companies, corporations, or products are

trademarks, registered trademarks, or brand names for each company or

corporation. The indications of (R) and TM are omitted.

8 of 74

171469-1CD

HW0485750

MH5 Explanation of Warning Labels

Explanation of Warning Labels

The following warning labels are attached to the manipulator.

Always follow the warnings on the labels.

Also, an identification label with important information is placed on the

body of the manipulator. Prior to operating the manipulator, confirm the

contents.

Figure 3: Warning Label Locations

Nameplate Warning Label B Warning Label B

Warning Label A

WARNING

Moving parts

may cause

injury

WARNING

Do not enter

robot

work area.

WARNING Label A:

WARNING Label B:

Nameplate

MADEINJAPAN

YASKAWAELECTRICCORPORATION

Kitakyushu806-0004Japan

2-1Kurosakishiroishi,Yahatanishi-ku,

SERIALNO.

PAYLOAD kg

TYPE

MASS

DATE

ORDERNO.

MOTOMAN-

MODEL

NJ3878

9 of 74

Safeguarding Tips

171469-1CD

HW0485750

MH5

Safeguarding Tips

All operators, programmers, maintenance personnel, supervisors, and

anyone working near the system must become familiar with the operation

of this equipment. All personnel involved with the operation of the

equipment must understand potential dangers of operation. General

safeguarding tips are as follows:

• Improper operation can result in personal injury and/or damage to

the equipment. Only trained personnel familiar with the operation of

this equipment, the operator's manuals, the system equipment, and

options and accessories should be permitted to operate this

equipment.

• Improper connections can damage the equipment. All connections

must be made within the standard voltage and current ratings of the

equipment.

• The system must be placed in Emergency Stop (E-Stop) mode

whenever it is not in use.

• In accordance with ANSI/RIA R15.06-2012, section 4.2.5, Sources of

Energy, use lockout/tagout procedures during equipment

maintenance. Refer also to Section 1910.147 (29CFR, Part 1910),

Occupational Safety and Health Standards for General Industry

(OSHA).

Mechanical Safety Devices

The safe operation of this equipment is ultimately the users responsibility.

The conditions under which the equipment will be operated safely should

be reviewed by the user. The user must be aware of the various national

codes, ANSI/RIA R15.06-2012 safety standards, and other local codes

that may pertain to the installation and use of this equipment.

Additional safety measures for personnel and equipment may be required

depending on system installation, operation, and/or location. The following

safety equipment is provided as standard:

• Safety barriers

• Door interlocks

• Emergency stop palm buttons located on operator station

Check all safety equipment frequently for proper operation. Repair or

replace any non-functioning safety equipment immediately.

10 of 74

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels YASKAWA Robotique

YASKAWA

YASKAWA MOTOMAN-MFL15D-875 Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manuel utilisateur

YASKAWA

YASKAWA Motoman DX200 Manuel utilisateur

YASKAWA

YASKAWA YYR-1-06VXH25-A10 Mode d'emploi

YASKAWA

YASKAWA MOTOMAN-HP20D Manuel utilisateur

YASKAWA

YASKAWA Smart Series Instructions d'installation et d'utilisation

YASKAWA

YASKAWA MOTOMAN-ES165D Manuel utilisateur

YASKAWA

YASKAWA Motoman UP6 Manuel utilisateur

YASKAWA

YASKAWA Motoman GP50 Manuel utilisateur

YASKAWA

YASKAWA Motoman ArcWorld IV-6300 XHD TR3C Guide de l'utilisateur

YASKAWA

YASKAWA Motoman DX200 Manuel utilisateur

YASKAWA

YASKAWA MA2010 Manuel

YASKAWA

YASKAWA MOTOMAN DX100 Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-MH50 Manuel utilisateur

YASKAWA

YASKAWA MH180 Mode d'emploi

YASKAWA

YASKAWA MOTOMAN-MA1900 Manuel utilisateur

YASKAWA

YASKAWA YRC1000micro Guide de l'utilisateur

YASKAWA

YASKAWA Motoman-MPL300 II Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN FS100 Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-MH5S II Manuel utilisateur

YASKAWA

YASKAWA MPL160-J00 Mode d'emploi

YASKAWA

YASKAWA MOTOMAN DX100 Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-DX100 Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-ES200RN Manuel utilisateur

Manuels Robotique populaires d'autres marques

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manuel utilisateur

SunFounder

SunFounder PiDog Manuel utilisateur

Universal Robots

Universal Robots UR5 Manuel utilisateur

Universal Robots

Universal Robots E Series Manuel utilisateur

EFORT

EFORT ECR5 Manuel d'instructions

Epson

Epson C8 Series Manuel utilisateur

WowWee

WowWee ROBOQUAD Manuel utilisateur

Milvus Robotics

Milvus Robotics SEIT 100 Manuel utilisateur

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manuel utilisateur

fischertechnik

fischertechnik Mini Bots Manuel utilisateur

Abicor Binzel

Abicor Binzel iCAT mini Manuel utilisateur

ABB

ABB OmniCore E10 Manuel utilisateur

pitsco

pitsco Tetrix Max Manuel utilisateur

ECOVACS

ECOVACS DEEBOT R95 Manuel utilisateur

Feng Yuan

Feng Yuan Interstellar Warrior Manuel utilisateur

SCHUNK

SCHUNK AGE-S-XYZ Instructions d'utilisation

Moorebot

Moorebot Scout Manuel utilisateur

Kondo

Kondo KXR KXR-A5 Manuel utilisateur