3AB-5961
Specifications
Item Specifications
Temp. -20 to 60 °CMeasurement range
Humid. 0 to 100 % RH (-5 to 55 °C)
Temp. 100
Ω/ 0 °COuput signal
Humid. 1-5 V DC (linear to 0 to 100 % RH) (output impedance: min. 10 kΩ)
0-10 V DC (linear to 0 to 100 % RH) (output impedance: min. 10 kΩ)
4-20 mA DC (linear to 0 to 100 % RH) (maximum permissible load 300 Ω)
Temp. +/- 0.3 °C (at conditions of -20 to 60 °C)Sensing accuracy
Humid. +/- 3 % RH (at conditions of 30 to 70 % RH 25 °C)
+/- 5 % RH (at conditions of 20 to 80 % RH 15 to 35 °C)
Temp. TY series max. 1 min.
HTY, HY series max. 4 min.
Time constant
(at air velocity 2 m/s)
Humid. Max. 1 min
Temp. Rated operating conditions: -20 to 60 °C 0 to 100 % RH (non-condensing)
Extreme operating conditions: -20 to 60 °C 0 to 100 % RH (non-condensing)
Storage conditions: -30 to 70 °C 5 to 95 % RH (non-condensing)
Humid. Rated operating condtions: -5 to 55 °C 10 to 100 % RH (non-condensing)
Extreme operating condtions: -20 to 60 °C 0 to 100 % RH (non-condensing)
Storage conditions: -30 to 70 °C 5 to 95 % RH (non-condensing)
Environmental
conditions
Air velocity Extreme operating conditions: 0 to 15 m/s
Power supply 24 V AC +10/-15 % (50/60 Hz), 24 V DC +/- 10 % (only for HTY、HYseries)
Power consumption 0.2 VA (at conditions of 24 V AC、HTY, HY series 1-5 V, 0-10 V output model)
150 mW (at conditions of 24 V DC、HTY, HY series 1-5 V, 0-10 V output model)
1.0 VA (at conditions of 24 V AC、HTY, HY series 4-20 mA output model)
800 mW (at conditions of 24 V DC、HTY, HY series 4-20 mA output model)
Dielectric strength 500 V AC less than 1 mA of leak for 1 minute
Insulation resistance 500 V DC min. 20 MΩ
Vibration resistance 9.8 m/s² (10 to 150 Hz)
Protection Housing IP54 (when splash-proof connectors and designated multi-core cables are used or when a
designated conduit is used)
The head of TY series is IP24
Installation Duct, air chamber, ventilated case for meteological instruments (with special bracket)
Wiring Terminal block connection
Material Housing: GF20 % Polycarbonate mixed resin, gray (equivalent to DIC-651)
Filter cap: Denatured PPE resin, gray (equivalent to DIC-651)
Weight Approx. 240 g (7803 series) Approx. 210 g (7813 series)
Accessories None
Order separatly 83157235-001 Mounting bracket
83157240-004 Conduit mounting set (for HTY, HY series、applicable cable outer diameter 11 to 14 φ)
83157240-009 Conduit mounting set (for TY series、applicable cable outer diameter 9.4 to 11 φ)
83104098-004 Seal connector (for HTY, HY series、applicable cable outer diameter 10.5 to 14.5 φ)
83104098-003 Seal connector (for TY series、applicable cable outer diameter 8.5 to 12.5 φ)
DY8000A1001 Sensor shield for outdoor
DY3002A1005 Ventilated case mounting bracket (L shape metal)
Order separately for
maintenance
83162945-003 Filter set
HTY78*3/HY78*3 series have passed the following tests:
EN50081-1/1992 (EN55011/1998 group 1, class B)
EN50082-1/1997 (EN61000-4-2, EN61000-4-3, ENV50204, EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-11)
