Yamaha CL3 Manuel utilisateur

Autres manuels pour CL3

3

Ce manuel convient aux modèles suivants

3

Table des matières

Autres manuels Yamaha Logiciel

Yamaha

Yamaha DM 2000 Version 2 Manuel utilisateur

Yamaha

Yamaha HUB Manuel utilisateur

Yamaha

Yamaha VE Manuel utilisateur

Yamaha

Yamaha S90 Manuel utilisateur

Yamaha

Yamaha Loopfactory AN200 Manuel utilisateur

Yamaha

Yamaha S70 XS Manuel utilisateur

Yamaha

Yamaha Sound Editor ver. 2.10 Manuel utilisateur

Yamaha

Yamaha 02R96 Version 2 Manuel

Yamaha

Yamaha disklavier MX-100A Manuel utilisateur

Yamaha

Yamaha Acoustic Manuel utilisateur

Yamaha

Yamaha Add-On Effects Manuel utilisateur

Yamaha

Yamaha mLAN Driver Manuel utilisateur

Yamaha

Yamaha mLAN mLAN Driver Manuel utilisateur

Yamaha

Yamaha PM1D Manager V2 Instructions et recettes

Yamaha

Yamaha S08 Voice Editor Manuel utilisateur

Yamaha

Yamaha EZ-220 Page Turner Manuel utilisateur

Yamaha

Yamaha DSP5D Editor Manuel utilisateur

Yamaha

Yamaha A4000 Manuel utilisateur

Yamaha

Yamaha 01V96 Manuel utilisateur

Yamaha

Yamaha M7CL StageMix V1.5 Manuel utilisateur

Yamaha

Yamaha FIRESTATION MLAN PATCHBAY Manuel utilisateur

Yamaha

Yamaha CVP-403PE Manuel utilisateur

Yamaha

Yamaha PM5D Manuel utilisateur

Yamaha

Yamaha DME-N Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur

CL StageMix V3.0 User Guide

Welcome:

Thank you for downloading the “CL StageMix” iPad app for the Yamaha CL series

digital mixing consoles.

The latest firmware version for CL series can be downloaded from

www.yamahaproaudio.com

StageMix is an application for the Apple iPad that provides remote control of Yamaha

CL series digital mixing consoles functions via a simple, intuitive graphical interface

from anywhere within wireless range. The software has been specifically designed to

allow engineers to adjust monitor mixes from the performers’ positions on stage,

directly controlling mix parameters via the iPad rather than having to rely on verbal

directions to a second engineer. The result is better mixes in less time; a huge

advantage during high-pressure pre-show setup. Although StageMix is focused on

the requirements for adjusting monitor mixes on stage, its range of features is

continually expanding, allowing it to be used for a wider variety of remote control

StageMix is an application for the Apple iPad that provides remote control of Yamaha

CL series digital mixing consoles functions via a simple, intuitive graphical interface

from anywhere within wireless range. The software has been specifically designed to

allow engineers to adjust monitor mixes from the performers’ positions on stage,

directly controlling mix parameters via the iPad rather than having to rely on verbal

directions to a second engineer. The result is better mixes in less time; a huge

advantage during high-pressure pre-show setup. Although StageMix is focused on

the requirements for adjusting monitor mixes on stage, its range of features is

continually expanding, allowing it to be used for a wider variety of remote control

functions.

Yamaha Commercial Audio CL StageMix V3.0 User Guide

CONTENTS

Page

1.0 System Requirements 4

2.0 Wi-Fi Settings 4

3.0 Getting Started 5

3.1 CL series Network Setup 5

3.2 iPad Wi-Fi Settings 5

3.3 StageMix Setup 6

3.3.1 OFFLINE DEMO Mode 7

3.3.2 Configure StageMix to Work with a CL

Series Console 7

3.3.3 Select a Mixer and Begin Working 8

3.3.4 Edit Mixer Configurations 8

4.0 Mixer Window 9

4.1 Channel Bank Navigation 9

4.2 Layer Navigation 9

4.3 Channel Names and Colors 10

4.4 Faders 10

4.4.1 Long Faders 10

4.4.2 Navigation in Long Faders Mode 10

4.5 Channel ON 11

4.6CUE 11

4.7 Master Bank 12

4.8GAIN 13

4.8.1 Digital Gain 14

4.8.2 Gain Compensation Mode 14

4.8.3 ALL GC ON 14

4.8.4 ALL GC OFF 14

4.8.5 Input Port 14

4.8.6 Phantom Power 14

4.8.7 Phase 14

4.9 SENDS ON FADERS 15

4.9.1 Mix Send Levels 16

4.9.2 Mix Sends ON 16

4.9.3 Stereo Mix Pan 16

4.10 DCA Faders 17

5.0 EQ & PAN 18

5.1EQ 18

5.1.1 EQ Curve in Mixer Window 18

5.1.2 Selecting PEQ or GEQ 19

5.1.3 Accessing the EQ Editing Screens 19

5.2 PARAMETRIC EQ EDITING 20

5.2.1 HPF 21

5.2.2 EQ Bands 1 & 4 21

5.2.3 EQ ON 22

Page 2

Yamaha Commercial Audio CL StageMix V3.0 User Guide

5.2.4 EQ RESET 22

5.2.5 EQ Type 22

5.3 GRAPHIC EQ EDITING 23

5.3.1 Navigation in the GEQ Overview Section 23

5.3.2 Rack Position 23

5.3.3 GEQ Type 24

5.3.4 Editing GEQ Bands 24

5.3.5 Navigation in the GEQ Editing Section 24

5.3.6 GEQ ON 24

5.3.7 GEQ FLAT 24

5.3.8 Copy/Paste 24

5.4 PAN TO STEREO BUSSES 25

5.4.1 Balance 25

6.0UTILITY 26

6.1 Mute Group Masters 26

6.1.1 Mute Group Dim Level 26

6.2 Tap Tempo 28

6.2.1 Multi-Select 28

7.0 SCENE MEMORY 29

7.1 Current Scene 29

7.2 Decrement / Increment Scene 30

7.3 Scene List 30

7.4 Scene Range 30

7.5 Selected Scene 31

7.6 Store Scene 31

7.7 Undo Store 31

7.8 Recall Scene 31

7.9 Undo Recall 32

8.0 SETUP 33

8.1 Fader Delay 33

8.2 Input Meter Point 33

8.3 Output Meter Point 33

8.4 Filled EQ Graph 34

8.5 Enable Inc/Dec Scene Recall 34

8.6 Show Send Levels in Meter Bridge 34

8.7 Set EQ band to 0dB with Double-Tap 34

8.8 Set DCA to 0dB with Double-Tap 34

8.9 Channel Select – StageMix Follows Console 34

8.10 Channel Select – Console Follows StageMix 34

9.0 Troubleshooting 35

9.1 No Wi-Fi Available 35

9.2 Connection Error 35

9.3 Connection Lost 36

9.4 Graphic EQ Doesn’t Affect the Sound 36

9.5 Problems Moving Multiple Faders 36

9.6 StageMix Facebook Page 36

Page 3

Yamaha Commercial Audio CL StageMix V3.0 User Guide

1.0 System Requirements

Apple iPad (1st generation iPad, iPad 2, or 3rd generation iPad)

Yamaha CL series digital mixing console

Wi-Fi access point (preferably with 802.11n, 5GHz capability, though 2.4GHz

and 802.11g will also work)

CAT5 cable (to connect the console to a Wi-Fi access point)

2.0 Wi-Fi Settings

Configure the Wi-Fi access point, following the manufacturer’s instructions. No

special settings are needed, but using security such as WPA is highly recommended,

to prevent unwanted devices from joining the network. Here are some suggested

settings to assist less experienced Wi-Fi users:

1. Give the wireless network a name (this is the “SSID”).

2. Choose a security mode (such as WPA) and password.

3. Select the wireless mode (802.11g or n).

4. In the case of “n”, select the wireless band (2.4 or 5GHz).

5. If available, enable “Auto Channel Selection” so the wireless channel with the

least interference will be selected.

802.11n networks at 5GHz are preferred because they allow faster communication

between the iPad and the Wi-Fi access point. Practically, this could result in more

accurate level metering with the StageMix app. Also, with 802.11n being a newer

standard, it is less prone to interference from other wireless networks. Using a Wi-Fi

access point with 2 or more external aerials is recommended to increase potential

signal range. Booster aerials could be connected for a further increase in

performance.

Page 4

Yamaha Commercial Audio CL StageMix V3.0 User Guide

3.0 Getting Started

3.1 CL Series Network Setup

I. Connect the Wi-Fi access point to the CL series console’s network port via a

CAT5 cable. Note that a cross-over cable will be needed with older access

points that don’t have the “auto MDIX” function. Most recent devices will

support “auto MDIX”, in which case a straight CAT5 cable can be used.

II. Note the IP address and MAC address of the CL series console - they will

need to be entered into the iPad later. They can be found in the console as

follows:

a. Press the [SETUP] button on the CL series touchscreen

b. Press [NETWORK] on the CL series touchscreen

3.2 iPad Wi-Fi Settings

The iPad needs to be given a static IP address in the same range as the CL

series’ IP Address.

a. Open the iPad “Settings” menu

b. Select “Wi-Fi”, and choose the correct network

Page 5

Yamaha Commercial Audio CL StageMix V3.0 User Guide

c. Press the blue circle with the white arrow to the right of the selected

network to edit the IP address.

d. Select [Static].

e. IP Address: enter an IP Address similar to the one for the CL series

console, but with just the last number different. (For example, if CL

series console is 192.168.0.128, give an address to the iPad such as

192.168.0.127).

f. Subnet Mask: enter “255.255.255.0”

g. Router: enter the IP Address of your Wi-Fi Access Point (usually printed

on the bottom of the device).

h. Press the iPad’s Home button to exit the Settings menu.

3.3 StageMix Setup

Launch the “CL StageMix” App

The “Select Mixer” screen will appear. From this screen, you can do any of

the following things:

Page 6

Yamaha Commercial Audio CL StageMix V3.0 User Guide

Access the OFFLINE DEMO mode to explore the features and user

interface of CL StageMix.

Configure StageMix to work with a CL series console.

Select a CL series console that has already been configured to work with

your iPad and begin using StageMix.

3.3.1 OFFLINE DEMO

If [OFFLINE DEMO] is pressed in the “Select Mixer” screen, the functions of

StageMix will operate independently of any mixing console. It is a useful way

to demonstrate and learn how to use the app without the need for a mixer.

Level meters and most Scene Memory functions do not work in this mode.

3.3.2 Configure StageMix to Work with a CL Series Console

i. Press [ADD MIXER] to open the following screen:

ii. Tap on the blank Name field and enter a name for your CL series

console using the iPad’s onscreen keyboard.

iii. Enter the CL series console’s IP address noted in 3.1. The default IP

Address may not need to be changed but confirm this in the Network

Setup screen of the CL series console (refer to 3.1). If you need to

modify the IP Address in StageMix, make sure you include the dots

between the sets of numbers (as shown above).

iv. Enter the CL series console’s MAC address noted in 3.1. When

entering the MAC Address, the colons between sets of characters will

be automatically added by StageMix.

Page 7

Yamaha Commercial Audio CL StageMix V3.0 User Guide

v. Select the Model of CL series console. Note: in the initial release of CL

StageMix, CL5 will be the only selectable choice.

vi. Press the [ADD MIXER] button at the bottom of the screen.

3.3.3 Select a Mixer and Begin Working

If your iPad has been configured to work with a CL series console, select the

mixer from the list and press [CONNECT]. (The model of mixer (CL1, CL3 or

CL5) will appear in smaller text below the mixer’s name.)

The message “Syncing With CL…” will appear while StageMix is obtaining

parameters from the console. After this process is complete, the Mixer window

will appear and StageMix is ready to be used.

If StageMix cannot connect with your console, refer to the Troubleshooting

section (9.0) at the end of this document for possible solutions.

3.3.4 Edit Mixer Configurations

The parameters of a saved Mixer Configuration can be viewed and edited by

tapping the right arrow button next to a mixer’s name. This will open the Edit

Mixer screen which allows the Name, IP Address and MAC Address to be

verified and edited using the procedures described in section 3.3.2. After

editing, press [SAVE MIXER] to save any changes.

Page 8

Yamaha Commercial Audio CL StageMix V3.0 User Guide

4.0 Mixer Window

The main page of the StageMix is called the “Mixer” window. It shows the EQ

curves, Pan positions, CUE and ON buttons, faders and level meters, and

channel names and colors for eight adjacent channels.

Across the top of the screen, level meters and faders are displayed in blocks

of channels for mono Input Channels 1-32, Stereo Input Channels 1-8, Mix

and Matrix busses, and the Master Stereo and Mono busses. This is the

“Navigation/Meter Bridge”.

4.1 Channel Bank Navigation

Press any of the “Navigation/Meter Bridge” blocks to select the bank of

channels to be viewed and controlled in the channel strips below.

4.2 Layer Navigation

Press the [CH 1-32] or [CH 33-72] button to make those banks of channels

available in the “Navigation/Meter Bridge”. Stereo Inputs 1-8 are available as

part of the [CH 1-32] bank.

The Layer Navigation button displays black text on a white background to

indicate the active Layer.

Page 9

Yamaha Commercial Audio CL StageMix V3.0 User Guide

4.3 Channel Names and Colors

The name and color of each channel appears in StageMix as it does in the CL

series console. The names are dimmed if the channel is switched off.

Double-tap on the channel name in the Mixer window to edit the name and

color. Type in a name and press [return]. Alternatively, navigate to another

channel using the left/right cursor buttons above the keyboard. This allows

multiple channels to be named before closing the keyboard.

4.4 Faders

Each fader has its channel number displayed on its cap. The fader cap must

be touched to allow the level to be adjusted. When a fader cap is touched, its

background will lighten and its current dB value will be displayed. Using the

iPad’s multi-touch facility, up to eight faders can be moved simultaneously.

Note: “Multitasking Gestures” must be turned Off in the iPad in order to allow

four or more faders to be adjusted simultaneously (refer to 9.5 for details).

4.4.1 Long Faders

Press the [LONG FADERS] button at the bottom-left corner of the Mixer

window to allow more accurate adjustment of fader levels. In this view,

EQ, Pan and the “Navigation/Meter Bridge” are not visible.

4.4.2 Navigation in Long Faders Mode

Although the “Navigation/Meter Bridge” is not visible in Long Faders

mode, it is possible to navigate up or down in banks of 8 channels

using the left/right arrow buttons in the upper left area of the Mixer

window.

Page 10