Yamaha RX-V367 Manuel utilisateur

PUSH

- 1 -

for North America

Quick Reference Guide

English

Preparing the remote control

1Take off the battery compartment cover.

2Insert the two supplied AAA batteries into the battery case, following the polarity

markings.

3Snap the battery compartment cover back into place.

Accessories

■

Items necessary for connection

■

The following accessories are supplied with this product.

Speakers

External components Cable

Cables for connecting external components•

(may differ depending on the devices you are connecting)

Speaker cables•

(a quantity to match the number of speakers you are connecting)

Audio pin cable•

(for subwoofer)

Remote control

Front speaker

Ex. Ex. Ex. Ex.

Playback device such as BD

(Blu-ray Disc)/DVD players

Batteries (2) (AAA, R03,

UM-4)

Center speaker

AM loop antenna

Surround speaker

Indoor FM antenna VIDEO AUX input cover

Active subwoofer

Use speakers with an impedance of at least 6Ω.•

If you are using a CRT TV, we recommend that you use magnetically shielded speakers.•

Prepare at least two speakers (for front).The priority of the other speakers is as follows:•

1 Two surround speakers

2 One center speaker

- 2 -

When connection and installation is nished, set up the speaker parameters

Connect and install as follows the rst time you use this unit.

See the following explanations for the connections for each number.

1Connect the speakers

2Connect a TV

3Connect playback device such as BD/DVD players and recorders

4Connect the AC power cord, and turn the power on

This unit

Subwoofer

BD/DVD player

(recorder)

Center speaker

Surround

speaker R

Surround

speaker L

Front

speaker R

Front

speaker L

ANTENNA

GND

CENTER

SURROUND

FRONT

SUBWOOFER

SPEAKERS

- 3 -

Connecting front speakers

FRONT

KERS

1Remove approximately 10mm of insulation from

the ends of the speaker cables, and twist the bare

wires of the cables together rmly so that they will

not cause short circuits.

2Loosen the speaker terminals.

3Insert the bare wire of the speaker cable into the

gap on the side of the terminal.

4Tighten the terminal.

Connecting the banana plug

(Except U.K., Europe, Asia and Korea

models)

Tighten the knob, and then insert the banana plug

into the end of the terminal.

Banana plug

FRONT

KERS

Caution:

Remove the AC power cord of this unit from the power outlet•

before connecting the speakers.

Generally speaker cables consist of two parallel insulated•

cables. One of these cables is a different color, or has a

line running along it, to indicate different polarity. Insert the

different colored (or lined) cable into the “+” (positive, red)

terminal on this unit and the speakers, and the other cable into

the “-” (minus, black) terminal.

Be careful that the core of the speaker cable does not touch•

anything or come into contact with the metal areas of this

unit.This may damage this unit or the speakers. If the speaker

cables short circuit,“CHECK SP WIRES!” will appear on the

front panel display when this unit is switched on.

When connecting 6Ω speakers, set the speaker impedance to•

6Ω on this unit before making connections. Refer to Owner’s

Manual for information on settings.

1Connect the speakers

Connecting center speakers /

surround speakers

CENTER

SURROUND

SPEAKE

1Press the tab on the speaker terminal down.

2Insert the speaker cable end into the terminal.

3Lift the tab to x the speaker cable in place.

Surround speaker

R L Front speaker

R L

Subwoofer Center speaker

Connecting the subwoofer

Connect the subwoofer input jack to the SUBWOOFER

jack on this unit with an audio pin cable.

2Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than

half).

Crossover frequency (if available): Set to maximum.

Subwoofer examples

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

- 4 -

2Connect a TV

Listening to TV audio

To playback TV audio on this unit, connect the TV audio output to this

unit.

Connect the following input jacks, matching the audio output jacks on

your TV. When viewing your TV, select the appropriate input source on

this unit.

Audio

output

COMPONENT

VIDEO

OPTICAL

(TV )

AV1AV2AV3AV4AV5

COAXIAL

(CD)

COAXIAL OPTICAL

VIDEO

COMPONENT

VIDEO

HDMI

HDMI 1

(BD/DVD)

HDMI 2

OUT

MONITOR OUT

DOCK

(

)

(

)

OPTICAL

Audio output from TV

Input jack on this unit

Optical digital output AV1 or AV4

Coaxial digital output AV2 or AV3

Analog output One of AV5, AUDIO1, or AUDIO2

Connecting to AV4 allows you to playback TV audio just by pressing✽

the “TV” under “SCENE” key.

Video input to this unit is output to a TV using output jacks of the

same kind.

When you have made connections using different types of video

such as HDMI and component video, make the same connection

with your TV. When viewing, be sure to switch the input source on

your TV to match the playback device.

COMPONENT

VIDEO

HDMI

VIDEO

COMPONENT

VIDEO

HDMI

VIDEO

Input Output

HDMI input

Component

video input

Video input

If your TV has multiple inputs, connect with the following priority (Ato C).

COMPONENT

VIDEO

OPTICAL

(TV )

AV1 AV2 AV3 AV4 AV5

AUDIO 1 AUDIO 2

COAXIAL

(CD)

COAXIAL OPTICAL

OUT

AUDIO

OUT

VIDEO

COMPONENT

VIDEO

HDMI

HDMI 1

(BD/DVD)

HDMI 2 HDMI 3

HDMI 4

OUT

MONITOR OUT

DOCK

(

)

(

)

CAL

(

)

VIDEO

COMPONENT

VIDEO

COMPONENT

VIDEO

HDMI

AWhen using an HDMI

compatible TV.

BWhen using a component

video input-compatible TV.

CWhen using a TV compatible

with video input only.

- 5 -

Connect playback device such as BD/DVD players and recorders

4Connect the AC power cord, and turn the power on

When playback, select the corresponding input source the jack is connected.•

Connecting to HDMI1 allows you to select the HDMI input just by pressing the “BD/DVD” under “• SCENE” key.

Connecting to AV3 allows you to select the AV3 input just by pressing the “CD” under• “SCENE”key.

If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from•

component video output jacks and audio from analog output jacks. Refer to Owner’s Manual for details.

COMPONENT

VIDEO

OPTICAL

(TV )

AV1 AV2 AV3 AV 4 AV5

AUDIO 1AUDIO2

COAXIAL

(CD)

COAXIAL OPTICAL

OUT

AUDI O

OUT

VIDEO

COMPONENT

VIDEO

HDMI

HDMI 1

(BD/DVD)

HDMI 2 HDMI 3

HDMI 4

OUT

MONITOR OUT

DOCK

(

)

(

)

AUDIO

VIDEO

COMPONENT

VIDEO

COAXIAL

OPTICAL

COMPONENT

VIDEO

HDMI

AWhen playback device is

capable of HDMI output

BWhen playback device is

capable of component video

output (with optical digital

audio output)

CWhen playback device is

capable of component video

output (with coaxial digital

audio output)

When playback device is

capable of video output (with

analog audio output) only

Be sure to aim the remote control directly at the remote control sensor

on this unit during operation.

RECEIVER

HDMI

AUDIO

TRANSMIT

SLEEP

1234

125

V-AUX

SOURCE

CODE SET

[ A ] [ B ] DOCK

30 30

Press

within

20 ft

AC power cord

To the power outlet.

If your playback device has multiple audio/video outputs, connect with the following

priority (Ato D) to enjoy a higher quality sounds and images.

- 6 -

5Set up speaker parameters

When you nish connecting, adjust the status, size, and volume

of each speaker so that the output is normal.

STEP 1: Display the setting menu

1Press RECEIVER Aon the remote control to switch this unit on.

2Press SETUP on the remote control.

3Check that “Speaker Setup” appears

and press ENTER.

This completes step 1.

STEP 2: Set the speaker status and size

The settings in step 2 are not necessary with the following speaker conguration:

• Front speaker: woofer diameter is 16 cm or larger

• Center/surround speakers: woofer diameter is 16 cm or smaller

• Subwoofer: connected

4Check that “Cong” appears and

press ENTER.

5Use Cursor B/ Cto select the speaker (subwoofer) you want to congure,

and then use Cursor D/ Eto select speaker status and size.

Information Description Setting

Subwoofer Sets the subwoofer status. Yes/None

Front Selects the size (sound reproduction capacity) of

the front speakers. Small/Large

Center Selects the size of the center speakers. Choose

“None” if you do not have a speaker connected. None/Small/Large

Sur. LR Selects the size of the surround speakers. Choose

“None” if you do not have a speaker connected. None/Small/Large

Crossover Audio with a frequency below this limit will be

output from the subwoofer or the front speakers. 40 Hz to 200 Hz

SWFR Phase Switchs the phase of the subwoofer. NRM/REV

Extra Bass

Selects whether to play front channel

low-frequency components through either the front

speakers or the subwoofer (Off), or through both

the subwoofer and front speakers (On).

On/Off

Whether or not you set “Crossover,”“SWFR Phase,” and “Extra Bass” is optional. Check•

how the effects sound and then congure them to your liking.

Use the following as a guide when setting speaker sizes.•

When you have completed the settings for one speaker, repeat the same procedure for all speakers

to complete settings.

6Press RETURN when setting is complete.

This completes step 2.

STEP 3: Set the distance from the listening point

7Press Cursor Cto display “Distance”

and press ENTER.

RECEIVER

SCENE

OPTION

SETUP

RETURN

VOLUME

ENHANCER SUR. DECODE

STRAIGHT

HDMI

AUDIO

TRANSMIT

SLEEP

1234

125

V-AUX

TUNER

INFO

MEMORY

PRESET

TUNING

MOVIE MUSIC

STEREO

DVD TV

RADIO

MUTE

ENTER

7856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

CODE SET

INPUT

MUTE

[ A ] [ B ] DOCK

1 2

[

]

[

]

SETUP

RECEIVER A

Cursor

ENTER

RETURN

SL SR

Config

SP SET VOL.

SL SR

Speaker Setup

SETUP VOL.

SL SR

Subwoofer;;Yes

CONFIG VOL.

SL SR

Unit;;;;;;feet

DIST VOL.

Continues to

the next page

- 7 -

8Press Cursor B / Cto select the speaker (subwoofer) that you want to congure, and press Cursor D / E

to set the distance.

If necessary, you can change the setting units under “Unit.”

Information Description Setting

Unit Switches between setting units (feet / meters). feet (ft) / meters (m)

Front L Front speaker L 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

Front R Front speaker R 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

Center Center speaker 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

Sur. L Surround speaker L 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

Sur. R Surround speaker R 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

SWFR Subwoofer 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

When you have completed the settings for one speaker, repeat the same procedure for all speakers to complete settings.

9Press RETURN when setting is complete.

This completes step 3.

STEP 4: Playback a test tone

10 Press Cursor Crepeatedly to display “Test Tone” and press ENTER.

11 Use Cursor D / Eto select “On.”

A test tone plays back from the speakers as soon as you select “On.” The test tone plays back in a clockwise fashion. Only speakers

congured for use in procedure 5 output the test tone.

12 Check that the test tone is playing back and press RETURN.

This completes step 4.

STEP 5: Adjust the volume

13 Press Cursor Brepeatedly to display “Level” and press ENTER.

14 Use Cursor B/ Cto switch the speaker that is

outputting the test tone, looking for speakers with

a different volume level to the others.

The front panel display shows the speaker that is outputting

the test tone.

Only speakers congured for use in procedure 5 output the

test tone.

15 If you nd a speaker with a different volume level to the others, use Cursor D/ Eto adjust the volume. Use

Front speaker L or R as a default when adjusting volumes.

To raise the volume: Press Cursor E.

To lower the volume: Press Cursor D.

16 Repeat steps 14 and 15 to adjust the volume balance for all speakers to your preference.

17 Press RETURN when setting is complete.

Return to the previous menu.

This completes step 5.

18 Repeat procedures 10-12 (step 4) to stop playback of the test tone.

19 Once you have completed all settings, press SETUP to close the Setup menu.

SL SR

FL----d----

LEVEL VOL.

SL SR

>Off On

TEST VOL.

Information Speakers

FL Front speaker L

FR Front speaker R

CCenter speaker

SL Surround speaker L

SR Surround speaker R

SWFR Subwoofer

- 8 -

RECEIVER

SCENE

OPTION

SETUP

RETURN

VOLUME

ENHANCER SUR. DECODE

STRAIGHT

HDMI

AUDIO

TRANSMIT

SLEEP

1234

125

V-AUX

TUNER

INFO

MEMORY

PRESET

TUNING

MOVIE MUSIC

STEREO

DVD TV

RADIO

MUTE

ENTER

7856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

CODE SET

INPUT

MUTE

[ A ] [ B ] DOCK

①

②

③

④

⑤

⑥

Operation guide

1Switches this unit between on and standby modes

This unit switches between on and standby mode every time you press this key.

2Choose an input source to listen to

The name of the selected input source appears on the front panel display.

SL SR

HDMI1

VOL.

3Select sound eld programs and sound decoders

Front

panel Remote

control Description

PROGRAM

MOVIE

Selects sound eld programs optimized for viewing

movies, dramas, and sports.

MUSIC

Selects sound eld programs optimized for

appreciating music.

ENHANCER

STEREO

Selects settings for stereo playback or enhancers for

compressed audio.

SUR. DECODE

Selects surround decoders such as Dolby Pro Logic II.

STRAIGHT

Switches to straight decoding mode for faithful

reproduction of audio / video.

4Adjusts the volume level

The current volume level is displayed on the front panel display.

SL SR

Volume -18.5dB

VOL.

5Mutes the sound

The indicator blinks while the sound is muted.

6Switches between input settings

You can switch input sources and sound eld programs with a single key.

SCENE Input Sound field program

BD/DVD HDMI 1 Straight

TV AV4 Straight

CD AV3 Straight

RADIO TUNER 5ch Enhancer

Pressing and holding this key allows you to store input sources/sound eld-

programs.

Press this key when this unit is in standby mode to switch on the unit.-

7Adjusting high/low-frequency sound (Tone control)

1Press TONE CONTROL to select “Treble” or “Bass.”

SL SR

TONE

Treble 0.0dB

VOL.

2Press PROGRAM l / hto increase the setting.

You can set the tone control for speakers and headphones separately. Connect-

the headphones when adjusting the headphone tone control.

If you set an extreme tone balance, sounds may not match those from other-

channels.

VIDEO

AUX

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

VOLU ME

DVD

RADIO

INPUT PROGRAM

SCENE

VIDEO

AUDIO

PORTABLE

INFO

MEMORY

PRESET

FM AM

TUNING

①④

②

③⑦

⑥

Autres manuels pour RX-V367

Table des matières

Autres manuels Yamaha Récepteur

Yamaha

Yamaha RX-V563 - AV Receiver Manuel utilisateur

Yamaha

Yamaha RX-V1 Manuel utilisateur

Yamaha

Yamaha MCX-2000A Manuel utilisateur

Yamaha

Yamaha R-V503 Manuel utilisateur

Yamaha

Yamaha RDX-E700 Manuel utilisateur

Yamaha

Yamaha YMC-500 - neoHD Media Controller AV Receiver Manuel utilisateur

Yamaha

Yamaha NS-IW280CWH Manuel utilisateur

Yamaha

Yamaha R-N402 Manuel utilisateur

Yamaha

Yamaha Aventage RX-A3040 Manuel utilisateur

Yamaha

Yamaha HTR-5063 Manuel utilisateur

Yamaha

Yamaha RX-A3000 Manuel utilisateur

Yamaha

Yamaha RX-V1067 Manuel utilisateur

Yamaha

Yamaha RX-Z9 Manuel utilisateur

Yamaha

Yamaha CRX-N560 Manuel utilisateur

Yamaha

Yamaha RX-V4600 - AV Receiver Manuel utilisateur

Yamaha

Yamaha RX-V2065 - AV Network Receiver Manuel utilisateur

Yamaha

Yamaha RX-V530/RX-V530RDS/HTR-5550/HTR-5550RDS/DSP-AX530RX-V430 Manuel utilisateur

Yamaha

Yamaha HTR-5072 Manuel utilisateur

Yamaha

Yamaha Aventage RX-A840 Manuel utilisateur

Yamaha

Yamaha HTR-2866 Manuel utilisateur

Yamaha

Yamaha rx-sl100 Manuel utilisateur

Yamaha

Yamaha RX-V671 Manuel utilisateur

Yamaha

Yamaha RX-900U Manuel utilisateur

Yamaha

Yamaha RX-V3900 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur