Yamaha HTR-3066 Guide de démarrage rapide

English

Français

Deutsch

Svenska

Italiano

Español

Nederlands

AV Receiver/Ampli-tuner audio-vidéo

Easy Setup Guide

Manuel de configuration rapide

Anleitung zur Schnelleinrichtung

Snabbinstallationsguide

Guida di configurazione rapida

Guía de configuración sencilla

Easy Setup-gids

En 1

Check that the following accessories are supplied with the product.

The following cables (not supplied) are required to build the system described in this

document.

• Speaker cables (x5)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])

1Preparation

Accessories

Remote control Batteries (AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

AM antenna FM antenna YPAO microphone

(HTR-3066 only)

CD-ROM

(Owner’s Manual)

Safety Brochure Easy Setup Guide

• The illustrations of the main unit and remote control used in this guide are of the HTR-3066 (U.S.A.

model), unless otherwise specified.

• (HTR-3066 [Australia model] only)

For information on how to control external devices with the remote control, refer to “Supplement for

Remote Control” on the supplied CD-ROM.

Cables required for connections

*The supplied remote control varies

depending on the model and the

region of purchase.

*The supplied FM antenna

varies depending on the

region of purchase.

This document explains how to set up a 5.1-channel system and play

back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner’s Manual for this product is

supplied on CD-ROM. For more information about this product, refer to the

Owner’s Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the

following website.

http://download.yamaha.com/

[For U.S. customers only]

Visit the following website for additional information, FAQ’s, downloads such as

“Owner’s Manual” and product updates.

http://usa.yamaha.com/support/

Easy Setup Guide

English

AV Receiver

2En

Set up the speakers in the room using the following diagram as a reference.

For information on other speaker systems, refer to “Owner’s Manual”.

2Placing speakers

1Front speaker (L)

2Front speaker (R)

3Center speaker

4Surround speaker (L)

5Surround speaker (R)

9Subwoofer

10° to 30°10° to 30°

En 3

■Connecting speaker cables

Speaker cables have two wires. One is for connecting

the negative (-) terminals of the unit and the speaker,

and the other is for the positive (+) terminals. If the wires

are colored to prevent confusion, connect the black wire

to the negative and the other wire to the positive

terminals.

(Connecting front speakers)

aRemove approximately 10 mm (3/8”) of insulation from

the ends of the speaker cable and twist the bare wires of

the cable firmly together.

bLoosen the speaker terminal.

cInsert the bare wires of the cable into the gap on the side

(upper right or bottom left) of the terminal.

dTighten the terminal.

Using a banana plug

(U.S.A., Canada, Australia and General models only)

aTighten the speaker terminal.

bInsert a banana plug into the end of the terminal.

(Connecting center/surround speakers)

aRemove approximately 10 mm (3/8”) of insulation from

the ends of the speaker cable and twist the bare wires of

the cable firmly together.

bPress down the tab.

cInsert the bare wires of the cable into the hole in the

terminal.

dRelease the tab.

1Connect the front speakers (1/2)

to the FRONT (//\) terminals.

3Connecting speakers/subwoofer

• (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm

speakers. When connecting 6-ohm speakers, set the unit’s

speaker impedance to “6 ΩMIN”. For details, see “Setting the

speaker impedance” in “Owner’s Manual”.

• Use a subwoofer equipped with built-in amplifier.

• Before connecting the speakers, remove the unit’s power cable

from the AC wall outlet and turn off the subwoofer.

• Ensure that the core wires of the speaker cable do not touch

each other or come into contact with the unit’s metal areas. This

may damage the unit or the speakers. If the speaker cables

short circuit, “Check SP Wires” will appear on the front display

when the unit is turned on.

FRONT

- (black)

+ (red)

FRONT

Banana plug

ROU

ND CENTER

aa b

d+ (red)

- (black)

FRONT

SURROUND CENTER

SPEAKERS

PRE OUT

SUBWOOFER

The unit (rear)

4En

2Connect the center speaker (3) to the

CENTER terminal. 3Connect the surround speakers

(4/5) to the SURROUND (//\)

terminals.

4Connect the subwoofer (9) to the

SUBWOOFER PRE OUT jack.

• Use a subwoofer equipped with built-in amplifier.

FRONT

SURROUND CENTER

SPEAKERS

PRE OUT

SUBWOOFER

The unit (rear)

FRONT

SURROUND CENTER

SPEAKERS

PRE OUT

SUBWOOFER

The unit (rear)

FRONT

SURROUND CENTER

SPEAKERS

PRE OUT

SUBWOOFER

The unit (rear)

Audio pin cable

En 5

4Connecting external devices

FRONT

3 AV 5

OPT C L

(TV )

)

OM ONENT

V DEO

AUD O 1 A DO

MON TOR OUT

OUT OUT

AUDIO

AV 4

COMPON NT

V DEO

MON TOR OUT

HDMI

BD DVD)

HDMI 2 HDMI 3

HDMI 4

HDMI

OUT

ARC

ANTENNA

SURROUND CENTER

SPEAKERS

RE OUT

SUBWOO ER

YPAO MIC

INFO

MEMORY

PRES T

FM AM

TUN NG

PHONES

S LENT

CINEMA

V DEO

VOLUME

AUX

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT PROGRAM

SCENE

V DEO

A DIO 5V A

HDMIOPTICAL

HDMI

OUT

ARC

HDMI HDMI

HDMI

OPT CAL

HDMI 1

(BD DVD)

VOLTAGE

SELECTOR

110 V

120V

220V

240V

(TV )

AV 4

Audio out

(optical) HDMI in HDMI out

BD/DVD player

HDMI OUT

jack

HDMI 1 jack

AV 4 (OPTICAL) jack

The unit (rear)

To an AC wall

outlet

Turn on the unit

The unit (front)

VOLTAGE SELECTOR

(General model only)

(HTR-3066 U.S.A. model)

1Connect external devices to the unit.

aConnect a BD/DVD player to the unit with an HDMI

cable.

If the BD/DVD player is currently connected to the

TV directly with an HDMI cable, disconnect the

cable from the TV and connect it to this unit.

bConnect a TV to the unit with the other HDMI cable.

cConnect a TV to the unit with a digital optical cable.

This connection is required to play back TV audio

on the unit. This connection is not required if your

TV supports ARC (Audio Return Channel).

dConnect the power cable to an AC wall outlet.

• For information on how to connect radio antennas or other

external devices, see “PREPARATIONS” in “Owner’s Manual”.

2Turn on the unit, the TV and the BD/DVD

player.

3Use the TV remote control to change the

TV input to video from the unit.

The connections are complete.

(HTR-3066)

Proceed to the next page to optimize the speaker

settings.

(HTR-2866)

Proceed to “Playing back a BD/DVD” on the last page.

(As necessary, configure the speaker settings manually.

For details, refer to “Owner’s Manual” on the supplied

CD-ROM.)

• By connecting a TV to the unit with an HDMI cable, you can

configure the unit’s settings with the menu displayed on the TV. In

addition, you can select the on-screen menu language from English

(default), Japanese, French, German, Spanish, Russian, Italian and

Chinese. For details, refer to “Owner’s Manual”. In this guide,

illustrations of English menu screens are used as examples.

Before connecting the power cable (General model only)

Make sure you set the switch position of

VOLTAGE SELECTOR according to your local voltage.

Voltages are AC 110-120/220-240 V, 50/60 Hz.

6En

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the

distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your room.

Preparing for YPAO

Optimizing the speaker settings automatically (YPAO)

• During the measuring process, test tones are output at high volume. Ensure that

the test tones do not frighten small children. Also, refrain from using this function at

night when it may be a nuisance to others.

• During the measuring process, you cannot adjust the volume.

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

• Do not stand between the speakers and the YPAO microphone during the

measurement process (about 3 minutes).

• Move to the corner of the room or leave the room.

1Connect the YPAO microphone to the

YPAO MIC jack on the front panel.

The following screen appears.

• To cancel the operation, disconnect the YPAO microphone, or

use the cursor keys to select “Exit” and press ENTER, before

starting the measurement.

2To start the measurement, press SETUP.

The measurement will start in 10 seconds.

The following screen appears on the TV when

the measurement finishes.

Auto Setup

Start

Exit

Press SETUP key

to Start

VOL

[SETUP]:Start

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

3.0 / +10.0 dB

OK:ENTER

VOL

Finished

VOLUME HIGH CUT

CROSSOVER/

MIN MAXMIN MAX

INFO MEMO

PRESET

TUN NG

SCENE

OPT ON

SETUP

RETURN

VOLUME

DDTV

RADIO

MUTE

ENTER

TRANSM T

RECE VER

HDMI

AUDIO

TUNER

SLEEP

USB

MODE

V AUX

MOV E MUSIC

SUR DECODE STRAIGHT

ENHANCER

1 4

MEM

RESE

UN N

RET

ADI

RAN

RECE VER

HDM

AUDI

TUNE

LEEP

MOV E MUSI

UR DECOD

TRAIGH

NHAN

The unit (front)

Place the YPAO microphone at your

listening position (same height as your

ears). We recommend the use of a

tripod as a microphone stand. You can

use the tripod screws to fix the

microphone in place.

YPAO microphone

Listening position

Ear height

Cursor keys

ENTER

Turn on the subwoofer and set

the volume to half. If the

cross-over frequency is

adjustable, set it to maximum.

SETUP

HTR-3066 only

En 7

• If any error message (such as E-1) or warning message (such

as W-2) appears, see “Error messages” or “Warning

messages” in “Owner’s Manual”.

• If the warning message “W-1:Out of Phase” appears, see “If

“W-1:Out of Phase” appears”.

3Use the cursor keys (e/r) to select

“SAVE” (Save) and press ENTER.

4Disconnect the YPAO microphone from the

unit.

This completes optimization of the speaker settings.

Follow the procedure below to check the speaker

connections.

aCheck for the blinking of the front display’s indicator to

identify the problem speaker.

bCheck the cable connections (+/-) of the problem

speaker.

If the speaker is connected correctly:

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

Proceed to step 3.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable, and then

try YPAO measurement again.

• The YPAO microphone is sensitive to heat, so should not be

placed anywhere where it could be exposed to direct sunlight or

high temperatures (such as on top of AV equipment).

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

3.0 / +10.0 dB

SAVE

VOL

>Save Cancel

If “W-1:Out of Phase” appears

Warning

message

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

3.0 / +10.0 dB

W 1:Out of Phase

OK:ENTER

VOL

W-1:PHASE

Problem speaker (blinks)

HTR-3066 only

8En

Now let’s play back a BD/DVD.

We recommend playing back multichannel audio

(5.1-channel or more) to feel surround sound produced

by the unit.

1Press HDMI 1 to select “HDMI 1” as the

input source.

2Start playback on the BD/DVD player.

3Press STRAIGHT repeatedly to select

“STRAIGHT”.

• When “STRAIGHT” (straight decode) is enabled, each

speaker produces each channel audio signal directly (without

sound field processing).

4Press VOLUME to adjust the volume.

This completes the basic setup procedure.

Sound is only being output from the front speakers

during multichannel audio playback

Check the digital audio output setting on the BD/DVD

player.

It may be set to 2-channel output (such as PCM).

No sound is coming from a specific speaker

See “Troubleshooting” in “Owner’s Manual”.

6Playing back a BD/DVD

INFO MEMO

PRESET

TUNING

SCENE

OPTION

SETUP

RETURN

VOLUME

DVDTV

RADIO

MUTE

ENTER

TRANSMIT

RECEIVER

HDMI

AUDIO

TUNER

SLEEP

USB

MODE

V AUX

MOVIE MUSIC

SUR DECODE STRA GHT

ENHANCER

MEM

RESE

UNIN

PTI

RET

ADI

ENTER

RAN

RECEIVER

HDM

AUDI

TUNE

LEEP

MOVIE MUSIC

UR DECOD

NHAN

HDMI 1

STRAIGHT

VOLUME

If surround sound is not working

SL SR

HDMI1

VOL

SL SR

VOL

STRAIGHT

SL SR

Volume -30.0dB

VOL

Many more features!

The unit has various other functions.

Please refer to “Owner’s Manual” on the supplied

CD-ROM to help you get the most out of the unit.

Connecting other playback

devices

Connect audio devices (such as CD player),

game consoles, camcorders, and many others.

Selecting the sound mode

Select the desired sound program (CINEMA

DSP) or surround decoder suitable for movies,

music, games, sports programs, and other

uses.

Playing back from iPod

(HTR-3066 only)

By using a USB cable supplied with iPod, you

can enjoy iPod music on the unit.

■

Listening to FM/AM radio

■Playing back music stored on

a USB storage device

(HTR-3066 only)

For more information, see “What you can do

with the unit”.

Fr 1

Vérifiez que les accessoires suivants sont fournis avec le produit.

Les câbles suivants (non fournis) sont requis pour l’installation du système décrit dans

le présent document.

• Câbles d’enceinte (x5)

• Câble HDMI (x2)

• Câble de broche audio (x1)

• Câble optique numérique (x1) (inutile si votre téléviseur prend en charge la fonction ARC

[Audio Return Channel])

1Préparation

Accessoires

Télécommande Piles (AAA, R03, UM-4) (x2)

Insérez les piles comme indiqué.

Antenne AM Antenne FM Microphone YPAO

(HTR-3066 uniquement)

CD-ROM

(Mode d’emploi) Brochure sur la sécurité Manuel de configuration

rapide

• Les illustrations de l’unité principale et de la télécommande utilisées dans ce guide représentent le

modèle HTR-3066 (pour les États-Unis), sauf mention contraire.

• (HTR-3066 [modèle pour l’Australie] uniquement)

Pour plus d’informations sur l’utilisation de la télécommande pour commander des appareils externes,

reportez-vous au document « Supplement for Remote Control » du CD-ROM fourni.

Câbles requis pour les raccordements

* La télécommande fournie

dépend du modèle et de la

région d’achat.

* L’antenne FM fournie

dépend de la région

d’achat.

Manuel de

configuration rapide

Français

Ampli-tuner audio-vidéo

Ce document décrit la configuration d’un système à 5.1 voies et explique

comment restituer le son d’ambiance d’un disque BD/DVD sur l’unité.

À des fins de protection de l’environnement, le Mode d’emploi de ce produit est

fourni sur CD-ROM. Pour plus d’informations sur ce produit, reportez-vous au

Mode d’emploi sur le CD-ROM fourni.

Pour télécharger ce guide ainsi que le « Mode d’emploi » au format PDF,

rendez-vous sur le site Web suivant :

http://download.yamaha.com/

Autres manuels pour HTR-3066

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Yamaha Récepteur

Yamaha

Yamaha RX-V459 - AV Receiver - 6.1 Channel Manuel utilisateur

Yamaha

Yamaha RX-V492 Manuel utilisateur

Yamaha

Yamaha RX-V867BL Manuel utilisateur

Yamaha

Yamaha Aventage RX-A770 Manuel d'utilisation et d'entretien

Yamaha

Yamaha RX-V567BL Manuel utilisateur

Yamaha

Yamaha RX-Z11 - AV Receiver Manuel utilisateur

Yamaha

Yamaha RX V565 Manuel utilisateur

Yamaha

Yamaha HTR-N5060 Manuel utilisateur

Yamaha

Yamaha YHT-693 Manuel utilisateur

Yamaha

Yamaha RX-V2095 Manuel utilisateur

Yamaha

Yamaha RX Z9 - AV Receiver Manuel utilisateur

Yamaha

Yamaha RXV765 - RX AV Receiver Manuel utilisateur

Yamaha

Yamaha SR-PGB54P Manuel utilisateur

Yamaha

Yamaha RX-V471 Guide de démarrage rapide

Yamaha

Yamaha RX-V1400 Manuel utilisateur

Yamaha

Yamaha YBA-11 Manuel utilisateur

Yamaha

Yamaha RX-V871 Guide de démarrage rapide

Yamaha

Yamaha RX-V563 - AV Receiver Manuel utilisateur

Yamaha

Yamaha RX-V2500 Manuel utilisateur

Yamaha

Yamaha RX-V2300 Manuel utilisateur

Yamaha

Yamaha RX-V740RDS Manuel utilisateur

Yamaha

Yamaha RX-V630RDS, DSP-AX630SE Manuel utilisateur

Yamaha

Yamaha HTR-3064 Series Manuel utilisateur

Yamaha

Yamaha RX-V481 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur