Yamaha HTR-3063 Manuel utilisateur

PUSH

Ex. Ex.

- 1 -

for Asia*, Africa, Oceania,

and Latin America

Quick Reference Guide

English

*Except for China

Preparing the remote control

Accessories

■

Items necessary for connection

■

The following accessories are supplied with this product.

Speakers

External components

Remote control

Front speaker

Ex. Ex.

Batteries (2) (AAA, R03,

UM-4)

Center speaker

AM loop antenna

Surround speaker

Indoor FM antenna VIDEO AUX input cover

Active subwoofer

YPAO microphone

within

6 m

1Take off the battery compartment cover.

2Insert the two supplied AAA batteries

into the battery case, following the

polarity markings.

3Snap the battery compartment cover

back into place.

Be sure to aim the remote control directly at the

remote control sensor on this unit during operation.

Cable

Cables for connecting external components•

(may differ depending on the devices you are connecting)

Speaker cables•

(a quantity to match the number of speakers you are connecting)

Audio pin cable•

(for subwoofer)

Playback device such as BD

(Blu-ray Disc)/DVD players

Use speakers with an impedance of at least 6Ω.•

If you are using a CRT TV, we recommend that you use magnetically shielded speakers.•

Prepare at least two speakers (for front). The priority of the other speakers is as follows:•

1 Two surround speakers

2 One center speaker

- 2 -

When connection and installation is nished, set up the speaker parameters

automatically

Connect and install as follows the rst time you use this unit.

See the following explanations for the connections for each number.

1Connect the speakers

2Connect a TV

3Connect playback device such as BD/DVD players and recorders

4Set the VOLTAGE SELECTOR and connect the AC power cord

(Asia and General models)

Connect the AC power cord

(Other models)

This unit

Subwoofer

BD/DVD player

(recorder)

Center speaker

Surround

speaker R

Surround

speaker L

Front

speaker R

Front

speaker L

ANTENNA

GND

CENTER

SURROUND

FRONT

SUBWOOFER

SPEAKERS

- 3 -

Caution:

Remove the AC power cord of this unit from the power outlet•

before connecting the speakers.

Generally speaker cables consist of two parallel insulated•

cables. One of these cables is a different color, or has a

line running along it, to indicate different polarity. Insert the

different colored (or lined) cable into the “+” (positive, red)

terminal on this unit and the speakers, and the other cable into

the “-” (minus, black) terminal.

Be careful that the core of the speaker cable does not touch•

anything or come into contact with the metal areas of this

unit.This may damage this unit or the speakers. If the speaker

cables short circuit,“CHECK SP WIRES!” will appear on the

front panel display when this unit is switched on.

1Connect the speakers

Connecting front speakers

FRONT

KERS

1Remove approximately 10mm of insulation from

the ends of the speaker cables, and twist the bare

wires of the cables together rmly so that they will

not cause short circuits.

2Loosen the speaker terminals.

3Insert the bare wire of the speaker cable into the

gap on the side of the terminal.

4Tighten the terminal.

Connecting center speakers /

surround speakers

CENTER

SURROUND

SPEAKE

1Press the tab on the speaker terminal down.

2Insert the speaker cable end into the terminal.

3Lift the tab to x the speaker cable in place.

Surround speaker

R L Front speaker

R L

Subwoofer Center speaker

Connecting the subwoofer

Connect the subwoofer input jack to the SUBWOOFER

jack on this unit with an audio pin cable.

2Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than

half).

Crossover frequency (if available): Set to maximum.

Subwoofer examples

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Connecting the banana plug

(Except U.K., Europe, Asia and Korea

models)

Tighten the knob, and then insert the banana plug

into the end of the terminal.

Banana plug

FRONT

KERS

- 4 -

2Connect a TV

Listening to TV audio

To playback TV audio on this unit, connect the TV audio output to this

unit.

Connect the following input jacks, matching the audio output jacks on

your TV. When viewing your TV, select the appropriate input source on

this unit.

Audio

output

COMPONENT

VIDEO

OPTICAL

(TV )

AV 1 AV 2 AV 3 AV 4 AV 5

COAXIAL

(CD)

COAXIAL OPTICAL

VIDEO

COMPONENT

VIDEO

HDMI

HDMI 1

(BD/DVD)

HDMI 2

OUT

MONITOR OUT

(

)

(

)

OPTICAL

Audio output from TV

Input jack on this unit

Optical digital output AV1 or AV4

Coaxial digital output AV2 or AV3

Analog output One of AV5, AUDIO1, or AUDIO2

Connecting to AV4 allows you to playback TV audio just by pressing✽

the “TV” under “SCENE” key.

Video input to this unit is output to a TV using output jacks of the

same kind.

When you have made connections using different types of video

such as HDMI and component video, make the same connection

with your TV. When viewing, be sure to switch the input source on

your TV to match the playback device.

COMPONENT

VIDEO

HDMI

VIDEO

COMPONENT

VIDEO

HDMI

VIDEO

Input Output

HDMI input

Component

video input

Video input

COMPONENT

VIDEO

OPTICAL

(TV )

AV 1 AV 2 AV 3 AV 4 AV 5

AUDIO 1 AUDIO 2

COAXIAL

(CD)

COAXIAL OPTICAL

OUT

AUDIO

OUT

VIDEO

COMPONENT

VIDEO

HDMI

HDMI 1

(BD/DVD)

HDMI 2 HDMI 3

HDMI 4

OUT

MONITOR OUT

(

)

(

)

(

)

VIDEO

COMPONENT

VIDEO

COMPONENT

VIDEO

HDMI

AWhen using an HDMI

compatible TV.

BWhen using a component

video input-compatible TV.

CWhen using a TV compatible

with video input only.

If your TV has multiple inputs, connect with the following priority (Ato C).

VOLTAGE

SELECTOR

110V-

120V

220V-

240V

VOLTAGE SELECTOR

(Asia and General models only)

Select the switch position according to your local voltage

using a straight slot screwdriver.

(General model)

Voltages are AC 110-120/220-240 V, 50/60 Hz.

(Asia model)

Voltages are AC 220-240 V, 50/60 Hz.

Caution

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local voltage BEFORE plugging the

power cable into the AC wall outlet. Improper setting of

the VOLTAGE SELECTOR may cause damage to this

unit and create a potential re hazard.

AC power cord

To the power

outlet.

- 5 -

Connect playback device such as BD/DVD players and recorders

When playback, select the corresponding input source the jack is connected.•

Connecting to HDMI1 allows you to select the HDMI input just by pressing the “BD/DVD” under “• SCENE” key.

Connecting to AV3 allows you to select the AV3 input just by pressing the “CD” under• “SCENE”key.

If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from•

component video output jacks and audio from analog output jacks. Refer to Owner’s Manual for details.

COMPONENT

VIDEO

OPTICAL

(TV )

AV 1 AV 2 AV 3 AV 4 AV 5

AUDIO 1 AU DIO 2

COAXIAL

(CD)

COAXIAL OPTICAL

OUT

AUDI O

OUT

VIDEO

COMPONENT

VIDEO

HDMI

HDMI 1

(BD/DVD)

HDMI 2 HDMI 3

HDMI 4

OUT

MONITOR OUT

(

)

(

)

AUDIO

VIDEO

COMPONENT

VIDEO

COAXIAL

OPTICAL

COMPONENT

VIDEO

HDMI

AWhen playback device is

capable of HDMI output

BWhen playback device is

capable of component video

output (with optical digital

audio output)

CWhen playback device is

capable of component video

output (with coaxial digital

audio output)

DWhen playback device is

capable of video output (with

analog audio output) only

If your playback device has multiple audio/video outputs, connect with the following

priority (Ato D) to enjoy a higher quality sounds and images.

Set the VOLTAGE SELECTOR and connect the AC power cord

(Asia and General models)

Connect the AC power cord

(Other models)

- 6 -

5Set up the speaker parameters automatically (YPAO)

When connection is nished, adjust the status, sizes, and volume balance of the

speakers to provide an optimal sound eld. This unit is equipped with a YPAO

(Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker

balance automatically with a simple procedure.

When you useYPAO, a test tone will be output from the speakers for approximately three minutes and acoustic measuring will be

performed. When using YPAO, be careful of the following.

The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby.•

Please take care that the test tone does not frighten any small children.•

1Check the following before using YPAO.

This unit

The headphones are removed.•

Subwoofer

The power is turned on.•

Volume is set to approximately half, and the cross-over frequency (if present) is set to maximum.•

Subwoofer examples

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

2Place the supplied YPAO microphone at ear height in your listening position.

YPAO microphone

When positioning the microphone, we recommend that you use equipment that allows you to adjust the height (such as a tripod) as a

microphone stand. When using a tripod, use the tripod screws to x the microphone in place.

3Press RECEIVER Aon the remote control to switch this unit on.

Continues to

the next page

- 7 -

RECEIVER

SCENE

OPTION

SETUP

RETURN

VOLUME

ENHANCER SUR. DECODE

STRAIGHT

HDMI

AUDIO

TRANSMIT

SLEEP

1234

125

V-AUX

TUNER

INFO

MEMORY

PRESET

TUNING

MOVIE MUSIC

STEREO

DVD TV

RADIO

MUTE

ENTER

7856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

CODE SET

INPUT

MUTE

[ A ] [ B ] [ C ]

MUSI

MEN

[

]

[

]

[

]

SETUP

RECEIVER A

ENTER

4Connect the YPAO microphone to the YPAO MIC jack on the front panel.

YPAO microphone

“MIC ON.YPAO START” appears on the front panel display, and then changes to display the following.

VOL.

SL SR

Press [SETUP]

YPAO

This completes preparations.To achieve more accurate results, be careful of the following when

measuring.

Measuring will take approximately three minutes. Keep the room as quiet as possible during•

measurement.

Wait in the corner of the listening room during measurement or leave it entirely, to avoid•

becoming an obstruction between the speakers and theYPAO microphone.

5Press SETUP on the remote control to start measurement.

VOL.

SL SR

Progress 00%

YPAO

Progress

The following display appears if measurement nishes without any problems.

VOL.

SL SR

YPAO Complete

YPAO

Note

When a problem occurs, an error message or a warning message appears either during or

after measurement. Refer to “Set up the speaker parameters automatically (YPAO)” in Owner’s

Manual to solve the problem, and carry out YPAO again.

6Press ENTER on the remote control to apply the results of measurement.

SL SR

Disconnect MIC

YPAO VOL.

7Remove the YPAO microphone.

YPAO nishes automatically when the YPAO microphone is removed.

- 8 -

RECEIVER

SCENE

OPTION

SETUP

RETURN

VOLUME

ENHANCER SUR. DECODE

STRAIGHT

HDMI

AUDIO

TRANSMIT

SLEEP

1234

125

V-AUX

TUNER

INFO

MEMORY

PRESET

TUNING

MOVIE MUSIC

STEREO

DVD TV

RADIO

MUTE

ENTER

7856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

CODE SET

INPUT

MUTE

[ A ] [ B ] [ C ]

①

②

③

④

⑤

⑥

Operation guide

1Switches this unit between on and standby modes

This unit switches between on and standby mode every time you press this key.

2Choose an input source to listen to

The name of the selected input source appears on the front panel display.

SL SR

HDMI1

VOL.

3Select sound eld programs and sound decoders

Front

panel Remote

control Description

PROGRAM

MOVIE

Selects sound eld programs optimized for viewing

movies, dramas, and sports.

MUSIC

Selects sound eld programs optimized for

appreciating music.

ENHANCER

STEREO

Selects settings for stereo playback or enhancers for

compressed audio.

SUR. DECODE

Selects surround decoders such as Dolby Pro Logic II.

STRAIGHT

Switches to straight decoding mode for faithful

reproduction of audio / video.

4Adjusts the volume level

The current volume level is displayed on the front panel display.

SL SR

Volume -18.5dB

VOL.

5Mutes the sound

The indicator blinks while the sound is muted.

6Switches between input settings

You can switch input sources and sound eld programs with a single key.

SCENE Input Sound field program

BD/DVD HDMI 1 Straight

TV AV4 Straight

CD AV3 Straight

RADIO TUNER 5ch Enhancer

Pressing and holding this key allows you to store input sources/sound eld-

programs.

Press this key when this unit is in standby mode to switch on the unit.-

7Adjusting high/low-frequency sound (Tone control)

1Press TONE CONTROL to select “Treble” or “Bass.”

SL SR

TONE

Treble 0.0dB

VOL.

2Press PROGRAM l / hto increase the setting.

You can set the tone control for speakers and headphones separately. Connect-

the headphones when adjusting the headphone tone control.

If you set an extreme tone balance, sounds may not match those from other-

channels.

②

③⑦

⑥

YC435A0/QREN3

Autres manuels pour HTR-3063

Table des matières

Autres manuels Yamaha Récepteur

Yamaha

Yamaha RXV765 - RX AV Receiver Manuel utilisateur

Yamaha

Yamaha RP-U200 Manuel utilisateur

Yamaha

Yamaha RX-V385 Manuel utilisateur

Yamaha

Yamaha RX-V557 Manuel utilisateur

Yamaha

Yamaha RX-V1067 Manuel utilisateur

Yamaha

Yamaha RX-N600D Manuel utilisateur

Yamaha

Yamaha rx-sl100 Manuel utilisateur

Yamaha

Yamaha RX-V430RDS Manuel utilisateur

Yamaha

Yamaha RX-V592RDS Manuel utilisateur

Yamaha

Yamaha RXV765 - RX AV Receiver Instructions d'utilisation

Yamaha

Yamaha Aventage RX-A840 Guide de démarrage rapide

Yamaha

Yamaha HTR-3063BL Manuel utilisateur

Yamaha

Yamaha R-S700 Manuel utilisateur

Yamaha

Yamaha R-300 Manuel utilisateur

Yamaha

Yamaha RX-V359 Manuel utilisateur

Yamaha

Yamaha RX-V3900 Manuel utilisateur

Yamaha

Yamaha RX-A810 Manuel utilisateur

Yamaha

Yamaha RX-V2400 Manuel utilisateur

Yamaha

Yamaha RX-V595 Manuel utilisateur

Yamaha

Yamaha HTR-5240 Manuel utilisateur

Yamaha

Yamaha RX-V661 Manuel utilisateur

Yamaha

Yamaha RX Z9 - AV Receiver Manuel utilisateur

Yamaha

Yamaha RXV765 - RX AV Receiver Manuel utilisateur

Yamaha

Yamaha RX V565 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur