Yaesu FTM-400 Manuel
V1.0 22/07/2019 KB
Configure the Yaesu FTM-400 for GB7MT Technical
Information
Yaesu UK Limited
Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB
1) Please make sure that your callsign has been entered in your radio. If not, please refer the Operator Manual.
2) Enter the output frequency of GB7MT 439.6625MHz
Make sure the radio is in VFO mode
.
Touch to toggle between VFO and
Memory mode.
Press
The function menu will be displayed.
Touch
The number input screen will be displayed.
V1.0 22/07/2019 KB
Configure the Yaesu FTM-400 for GB7MT Technical
Information
Yaesu UK Limited
Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB
Touch the numbers
[4] [3] [9] [6] [6] [2]
The Frequency 439.66250 will be displayed
on the screen.
Press to hide the function menu.
3) Set the mode to C4FM.
Press the button until above the
mode indication is displayed. This will put
the radio is AMS mode, the radio will
automatically switch between DN, VW or
FM.
4) Setup the repeater shift frequency
Press for one second or longer.
The Setup Menu will be displayed.
Touch CONFIG
V1.0 22/07/2019 KB
Configure the Yaesu FTM-400 for GB7MT Technical
Information
Yaesu UK Limited
Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB
Turn to select [5 RPT SHIFT]
Touch [5 RPT SHIFT] until – is displayed
Turn to select [6 RPT SHIFT FREQ]
Touch [6 RPT SHIFT FREQ] so that the current
repeater shift frequency is highlighted in
yellow.
Turn until the repeater shift frequency is
9.00 MHz.
Touch three times until the radio is
back at the main frequency display.
5) Store the repeater frequencies into a memory channel.
Press for one second or longer.
The memory writing screen will be displayed.
The frequency will be automatically displayed
in the next empty memory channel.
Turn to select a different memory
channel if desired.
Press to save the data to memory.
If you wish to name the memory channel
please refer to Page 70 Steps 1 to 11 in
“Naming the memory” in the operating
manual.
V1.0 22/07/2019 KB
Configure the Yaesu FTM-400 for GB7MT Technical
Information
Yaesu UK Limited
Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB
Press to save the data to memory.
When the memory writing is completed the
frequency and memory channel number will
be shown in the display.
Touch to toggle between VFO and
Memory mode.
Table des matières
Autres manuels Yaesu Radio
Yaesu
Yaesu FTC-2003 Manuel utilisateur
Yaesu
Yaesu FTA-250L Manuel
Yaesu
Yaesu FT-65 Manuel utilisateur
Yaesu
Yaesu FT-270R Manuel
Yaesu
Yaesu FT1DE Manuel utilisateur
Yaesu
Yaesu FT-70DR Manuel utilisateur
Yaesu
Yaesu VX-3R Manuel utilisateur
Yaesu
Yaesu VX-150 Mode d'emploi
Yaesu
Yaesu FT-100 Micro Mobile Mode d’emploi
Yaesu
Yaesu FT-23R MKII Manuel
Yaesu
Yaesu FT-8800 Manuel utilisateur
Yaesu
Yaesu FT8900 Manuel utilisateur
Yaesu
Yaesu FT-411 MKII Manuel
Yaesu
Yaesu FTC-2003 Manuel utilisateur
Yaesu
Yaesu FTDX101MP Manuel utilisateur
Yaesu
Yaesu FTM-100DR Manuel technique
Yaesu
Yaesu GB7MT Manuel
Yaesu
Yaesu VX-3200V Manuel utilisateur
Yaesu
Yaesu FRG-7700 Manuel utilisateur
Yaesu
Yaesu FT-23R MKII Manuel
