Internal 7 in 1 Drive User’s Manual 149369-02 Rev. A
Page 2 August 2002
Important instructions for use of the Internal 7 in 1 Drive
This product usually comes built in a PC. If you install or remove the product from
your PC by yourself, read the manual for the PC and pay much attention so as not to
suffer an electric shock.
Caution
Before building the Internal 7 in 1 Drive in your PC, read through this
manual. The driver software may have to be installed in advance.
Before turning the power to the PC on or off, remove all media from the
product.
This product is precision equipment. So do not drop the product, give
a strong impact to it, or install it in locations exposed to heavy
vibrations or high temperatures; doing so may cause the product
breakdown.
Prohibition
Do not disassemble or modify the product. Disassembly or
modification may cause a breakdown, fire, or electric shock.
Do not use or store the product in wet locations. The entry of liquid
into the product may result in a breakdown, fire, or electric shock.
Do not insert any media other than specified ones. The insertion of a
metal piece such as a coin or clip may lead to a breakdown, fire, or
electric shock.
Do not remove the media from the product when its access LED lamp
stays illuminated.
This product is intended for being used in general electric equipment.
Do not use it in equipment (aerospace equipment, atomic power
control system, traffic-related equipment, transportation equipment,
industrial robot, combustion equipment, various safety devices, life-
support system, etc.) that special quality and reliability are required, or
that may threaten the human life or cause injury to the human body.
zIt is prohibited by the copyright law to reproduce the whole or part of this software
and User’s Manual and rent the software, without permission of the copyright holder.
zWe bear no liability for any pecuniary losses and lost profits resulting from use of the
software included with this product, and any claims from third parties.
zThis software cannot be used on other than specified equipment.
zThe specifications of this software are subject to change without notice.
zWe assume no responsibility for any breakdown and damage caused by misuse,
troubles from other equipment, undue repairs or modifications.
zIf this product should have any defect attributable to manufacture, we will exchange it
with a new one, but cannot take on any more responsibility.
Illustrative pictures in this manual may differ from the PC’s actual screens.
CompactFlash is a registered trademark of SanDisk Corporation.
IBM is a registered trademark of IBM Corporation.
, SmartMedia is a registered trademark of Toshiba Corporation.
MultiMediaCard is a trademark of Infineon Technologies AG and licensed MultiMediaCard Association.
SD Logo is a trademark.
Microsoft Windows is a registered trademark of Microsoft Corporation.
, SONY and Memory Stick is a registered trademark of SONY Corporation.
Y-E Data is a registered trademark of Y-E Data, Inc.
Other company names and product names in this manual are trademarks or registered trademarks of their
respective companies.
