Xylem FLYGT Compit 901 Series Manuel utilisateur

Installation, Operation, and

Maintenance Manual

EN SV

888322_3.0

Compit 901

en Installation, Operation and Maintenance

Manual.........................................................4

de Installations-, Betriebs- und

Wartungshandbuch....................................82

sv Installations-, drift- och underhållsmanual

...................................................................43

1 Introduction and Safety

1.1 Introduction

Purpose of the manual

The purpose of this manual is to provide the necessary information for working with the unit. Read this manual

carefully before starting work.

Read and keep the manual

Save this manual for future reference, and keep it readily available at the location of the unit.

Intended use

WARNING:

Operating, installing, or maintaining the unit in any way that is not covered

in this manual could cause death, serious personal injury, or damage to the

equipment and the surroundings. This includes any modification to the

equipment or use of parts not provided by Xylem. If there is a question re-

garding the intended use of the equipment, please contact a Xylem repre-

sentative before proceeding.

Other manuals

See also the safety requirements and information in the original manufacturer's manuals for any other equip-

ment furnished separately for use in this system.

1.2 Safety terminology and symbols

About safety messages

It is extremely important that you read, understand, and follow the safety messages and regulations carefully

before handling the product. They are published to help prevent these hazards:

• Personal accidents and health problems

• Damage to the product and its surroundings

• Product malfunction

Hazard levels

Hazard level Indication

DANGER:

A hazardous situation which, if not avoided, will result

in death or serious injury

WARNING:

A hazardous situation which, if not avoided, could re-

sult in death or serious injury

CAUTION:

A hazardous situation which, if not avoided, could re-

sult in minor or moderate injury

NOTICE:

Notices are used when there is a risk of equipment

damage or decreased performance, but not personal

injury.

Special symbols

Some hazard categories have specific symbols, as shown in the following table.

en - Original instructions

Electrical hazard Magnetic fields hazard

Electrical Hazard: CAUTION:

1.3 User safety

All regulations, codes, and health and safety directives must be observed.

The site

• Observe lockout/tagout procedures before starting work on the product, such as transportation, installation,

maintenance, or service.

• Pay attention to the risks presented by gas and vapors in the work area.

• Always be aware of the area surrounding the equipment, and any hazards posed by the site or nearby equip-

ment.

Qualified personnel

This product must be installed, operated, and maintained by qualified personnel only.

Protective equipment and safety devices

• Use personal protective equipment as needed. Examples of personal protective equipment include, but are

not limited to, hard hats, safety goggles, protective gloves and shoes, and breathing equipment.

• Make sure that all safety features on the product are functioning and in use at all times when the unit is being

operated.

1.4 Special hazards

1.4.1 Confined spaces

DANGER: Inhalation Hazard

The chamber or tank where the equipment is installed should be treated as

a confined space. Always follow the applicable safety laws, regulations and

guidelines for confined spaces.

Never work alone in a confined space. Before entering the space, check that the following requirements are

complied with:

• The atmosphere contains sufficient oxygen

• The atmosphere contains no explosive or toxic gases

• If there is a risk of insufficient oxygen or toxic or hazardous gases, then use an airline respirator or self-con-

tained breathing apparatus.

• All energy sources are locked out and tagged out

• Adequate ventilation is in place

• There is a clear path of retreat

• Monitoring is in place for hazards which can develop after entering the confined space

• The applicable safety laws, regulations, and guidelines for confined spaces are understood and followed.

1.4.2 Biological hazards

The product is designed for use in liquids that can be hazardous to your health. Observe these rules when you

work with the product:

• Make sure that all personnel who may come into contact with biological hazards are vaccinated against dis-

eases to which they may be exposed.

• Observe strict personal cleanliness.

WARNING: Biological Hazard

Infection risk. Rinse the unit thoroughly with clean water before working on

it.

1.4.3 Wash the skin and eyes

Follow these procedures for chemicals or hazardous fluids that have come into contact with your eyes or

your skin:

en - Original instructions

Condition Action

Chemicals or hazardous fluids

in eyes

1. Hold your eyelids apart forcibly with your fingers.

2. Rinse the eyes with eyewash or running water for at least 15 minutes.

3. Seek medical attention.

Chemicals or hazardous fluids

on skin

1. Remove contaminated clothing.

2. Wash the skin with soap and water for at least 1 minute.

3. Seek medical attention, if necessary.

1.5 Protecting the environment

Emissions and waste disposal

Observe the local regulations and codes regarding:

• Reporting of emissions to the appropriate authorities

• Sorting, recycling and disposal of solid or liquid waste

• Clean-up of spills

Exceptional sites

CAUTION: Radiation Hazard

Do NOT send the product to Xylem if it has been exposed to nuclear radia-

tion, unless Xylem has been informed and appropriate actions have been

agreed upon.

1.6 Spare parts

CAUTION:

Only use the manufacturer’s original spare parts to replace any worn or

faulty components. The use of unsuitable spare parts may cause malfunc-

tions, damage, and injuries as well as void the warranty.

1.7 Warranty

For information about warranty, see the sales contract.

2 Transportation and Storage

2.1 Precautions

DANGER: Electrical Hazard

Before starting work on the unit, make sure that the unit and the control

panel are isolated from the power supply and cannot be energized. This ap-

plies to the control circuit as well.

en - Original instructions

CAUTION:

The operator must be aware of safety precautions to prevent physical in-

jury.

Tip risk if pallet straps are removed

If the straps securing the unit to its pallet have been removed, then the unit must be secured from tipping or

falling.

CAUTION: Crush Hazard

Make sure that the unit cannot roll or fall over and injure people or damage

property.

2.2 Position and fastening

Units with a concrete access cover are delivered in a vertical position, standing upside down on the delivery

pallet. Regardless of the type of access cover, the unit must be stored in an upright position.

2.3 Examine the delivery

2.3.1 Examine the package

1. Examine the package for damaged or missing items upon delivery.

2. Record any damaged or missing items on the receipt and freight bill.

3. If anything is out of order, then file a claim with the shipping company.

If the product has been picked up at a distributor, make a claim directly to the distributor.

2.3.2 Examine the unit

1. Remove packing materials from the product.

Dispose of all packing materials in accordance with local regulations.

2. To determine whether any parts have been damaged or are missing, examine the product.

3. If applicable, unfasten the product by removing any screws, bolts, or straps.

Use care around nails and straps.

4. If there is any issue, then contact a sales representative.

2.4 Transportation guidelines

2.4.1 Lifting

Always inspect the lifting equipment and tackle before starting any work.

WARNING: Crush Hazard

Always lift the unit by its designated lifting points.

Use suitable lifting equipment and ensure that the product is properly

harnessed.

Wear personal protective equipment.

Stay clear of cables and suspended loads.

NOTICE:

Never lift the unit by its cables or hose.

Lifting equipment

Lifting equipment is always required when handling the unit. It must fulfill the following requirements:

en - Original instructions

• The minimum height (contact your local sales and service representative for information) between the lifting

hook and the floor must be sufficient to lift the unit.

• The lifting equipment must be able to hoist the unit straight up and down, preferably without the need for

resetting the lifting hook.

• The lifting equipment must be securely anchored and in good condition.

• The lifting equipment must support weight of the entire assembly and must only be used by authorized per-

sonnel.

• Two sets of lifting equipment must be used to lift the unit for repair work.

• The lifting equipment must not be oversized.

CAUTION: Crush Hazard

Over-dimensioned lifting equipment can lead to injury. A site-specific risk

analysis must be done.

Separate handling of pump and unit

The unit and the pump are delivered separately. Never install a pump prior to lifting the unit.

Empty the unit before lifting

The unit must be emptied of liquid before lifting.

2.5 Remove from the pallet: Unit delivered right-side up

This section is applicable for units that are delivered with a plastic access cover. Units with a plastic access cov-

er are delivered in a vertical position, standing right-side up on the delivery pallet.

1. Unload the unit from the truck and put it carefully on a rigid, horizontal surface.

2. Attach a sling to the lifting eye.

Figure 1: Lifting eyes

WS011555A

3. Connect the other end of the lifting strap to the lifting equipment.

4. Raise the lifting hook until the lifting sling is taut.

5. Cut the straps which secure the pump station to the pallet.

6. Lift the unit straight up.

The unit may jolt or sway near the end of the lifting operation.

WARNING: Crush Hazard

Always lift the unit by its designated lifting points.

en - Original instructions

Use suitable lifting equipment and ensure that the product is properly

harnessed.

Wear personal protective equipment.

Stay clear of cables and suspended loads.

7. Lower the unit into position.

CAUTION: Crush Hazard

Make sure that the unit cannot roll or fall over and injure people or damage

property.

2.6 Turn the unit to an upright position: Unit with anchoring ring (foot)

This section is applicable for pump units that are delivered with a concrete access cover. The unit is delivered

with the foot attached.

Units with a concrete access cover are delivered in a vertical position, standing upside down on the delivery

pallet.

1. Unload the unit from the truck and put it carefully on a rigid, horizontal surface.

2. Attach a sling around the foot.

WS011669B

3. Raise the lifting hook until the lifting sling is taut.

4. Cut the straps which secure the pump station to the pallet.

en - Original instructions

WS011670A

5. Lift the unit straight up.

The unit may jolt or sway near the end of the lifting operation.

WARNING: Crush Hazard

Always lift the unit by its designated lifting points.

Use suitable lifting equipment and ensure that the product is properly

harnessed.

Wear personal protective equipment.

Stay clear of cables and suspended loads.

Make sure that the concrete cover stays on the pallet.

WS012520A

6. Put the unit on the ground in a horizontal position.

7. Attach a sling to the lifting eye.

en - Original instructions

Autres manuels pour FLYGT Compit 901 Series

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Xylem Pompe à eau

Xylem

Xylem G&L A-C 8100 Series Manuel utilisateur

Xylem

Xylem Flygt Top 50 Manuel utilisateur

Xylem

Xylem Rule LoPro LP900S Manuel utilisateur

Xylem

Xylem GOULDS NPO Manuel utilisateur

Xylem

Xylem Lowara e-IXPSA Manuel

Xylem

Xylem Lowara Scuba Series Instructions originales

Xylem

Xylem FLYFT P7900 Manuel utilisateur

Xylem

Xylem Goulds NPE Manuel

Xylem

Xylem rule 7700 GPH Manuel utilisateur

Xylem

Xylem Flojet U55 Series Manuel utilisateur

Xylem

Xylem Lowara e-MPV Manuel utilisateur

Xylem

Xylem GSP0311 Manuel utilisateur

Xylem

Xylem Rule Mate Manuel utilisateur

Xylem

Xylem GOULDS e-AB Series Manuel utilisateur

Xylem

Xylem Lowara Z8 Series Manuel utilisateur

Xylem

Xylem Lowara SEKAMATIK 10 E 5M Manuel de service

Xylem

Xylem GOULDS LB Manuel utilisateur

Xylem

Xylem Lowara ESH Manuel utilisateur

Xylem

Xylem Rule LoPro LP900D Manuel utilisateur

Xylem

Xylem Goulds SHV Series Manuel

Xylem

Xylem Bell & Gossett LD3 Manuel utilisateur

Xylem

Xylem e-MPA Manuel utilisateur

Xylem

Xylem LOWARA e-LNE Series Manuel utilisateur

Xylem

Xylem Goulds 3656 Manuel

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur

STA-RITE

STA-RITE ST33APP Manuel utilisateur