Xtool IP616 Manuel utilisateur
Shenzhen Xtooltech Intelligent Co., LTD
User Manual
IP616 Smart Diagnostic System
I
Please read this user manual carefully before using the IP616 Smart
Diagnostic System. When reading the manual, please pay attention to the
words “Note” or “Caution”, and read them carefully for appropriate
operation.
TRADEMARKS
is a registered trademark of Shenzhen Xtooltech Intelligent
CO., LTD.
In countries where the trademarks, service marks, domain names, logos
and the name of the company are not registered, XTOOL claims that it still
reserves the ownership of the unregistered trademarks, service marks,
domain names, logos and the company name. All other marks for the
other products and the company’s name mentioned in the manual still
belong to the original registered company.
You may not use the trademarks, service marks, domain names, logo and
company name of XTOOL or other companies mentioned without written
permission from the trademark holder.
XTOOL reserves the right to the final interpretation of this manual content.
COPYRIGHT
Without the written consent of Shenzhen Xtooltech Intelligent Co., Ltd.,
any company or individual shall not copy or backup this operation manual
in any form (electronic, mechanical, photocopying, recording, or other
forms).
II
DECLARATION
This manual is designed for the usage of the IP616 Smart Diagnostic
System and provides operating instructions and product descriptions for
users of the IP616 Smart Diagnostic system.
No part of this manual can be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise), without the prior written
permission of XTOOL.
Use the device only as described in this manual. XTOOL is not
responsible for any consequences of violating the laws and regulations
caused by using the product or its data information
XTOOL shall not be liable for any incidental or consequential damages or
for any economic consequential damages arising from the accidents of
individual users and the third parties, misuse or abuse of the device,
unauthorized change or repair of the device, or the failure made by the
user not to use the product according to the manual.
All information, specifications, and illustrations in this manual are based
on the latest configurations and functions available at the time of printing.
XTOOL reserves the right to make changes at any time without notice.
OPERATION INSTRUCTIONS
For safe operation, please follow the instructions below:
Keep the device away from heat or fumes when you use it.
If the vehicle battery contains acid, please keep your hands and skin
or fire sources away from the battery during testing.
The exhaust gas of the vehicle contains harmful chemicals, please
ensure adequate ventilation.
III
Do not touch the cooling system components or exhaust manifolds
when the engine is running due to the high temperatures reached.
Make sure the car is securely parked, Neutral is selected or the
selector is at P or N position to prevent the vehicle from moving
when the engine starts.
Make sure the (DLC) diagnostic link connector is functioning properly
before starting the test to avoid damage to the Diagnostic Computer.
Do not switch off the power or unplug the connectors during testing,
otherwise, you may damage the ECU and/or the Diagnostic
Computer.
CAUTIONS!
Avoid shaking or dismantling the unit as it may damage the internal
components.
Do not use hard or sharp objects to touch the LCD screen;
Do not use excessive force;
Do not expose the screen to strong sunlight for a long period.
Please keep it away from water, moisture, high temperature or very
low temperature.
If necessary, calibrate the screen before testing to ensure the
accuracy of LCD performance.
Keep the main unit away from strong magnetic fields.
AFTERSALES-SERVICES
E-Mail: [email protected]
Tel: +86 755 21670995 or +86 755 86267858 (China)
Official Website: www.xtooltech.com
IV
CONTENT
TRADEMARKS ................................................................................I
COPYRIGHT .................................................................................... I
DECLARATION .............................................................................. II
OPERATION INSTRUCTIONS .......................................................II
CAUTIONS! ................................................................................... III
AFTERSALES-SERVICES ............................................................III
CONTENT ......................................................................................IV
1 GENERAL INTRODUCTION ................................................... 1
Tablet .................................................................................................... 1
Front View of Tablet......................................................................................1
Back View of Tablet.......................................................................................2
Host Ports ......................................................................................................... 3
Technical Specifications ....................................................................... 3
Package Kit ...........................................................................................4
2 GETTING STARTED ................................................................5
Activation .............................................................................................. 5
Main Interface ....................................................................................... 7
Operation system...........................................................................................7
Diagnostic system entrance....................................................................... 9
Function Buttons............................................................................................ 9
Navigation Buttons..................................................................................... 10
Notification Bar .............................................................................................11
Factory Reset ......................................................................................12
V
3 UPDATE ................................................................................. 14
4 DIAGNOSTIC ......................................................................... 15
Vehicle Connection ............................................................................. 15
Diagnostic ........................................................................................... 17
Vehicle Selection..........................................................................................17
Diagnostic functions...................................................................................20
5 SPECIAL FUNCTIONS .......................................................... 28
5.1 OIL RESET ................................................................................... 29
5.2 EPB ...............................................................................................31
5.3 SAS ...............................................................................................33
5.4 DPF ...............................................................................................36
5.5 BMS RESET ................................................................................. 40
5.6 THROTTLE ................................................................................... 43
5.7 INJECTOR CODING .....................................................................44
5.8 GEARBOX MATCH ...................................................................... 47
5.9 GEAR LEARNING ........................................................................ 48
6 SETTINGS ..............................................................................50
Language ............................................................................................ 50
Units ....................................................................................................51
My Workshop Info ............................................................................... 52
Firmware Information .......................................................................... 53
About ...................................................................................................54
7 REPORT ................................................................................. 55
VI
Report ................................................................................................. 55
Replay .................................................................................................58
File Manager ....................................................................................... 59
8 REMOTE ASSISTANCE ........................................................ 59
9 FAQ ........................................................................................ 61
Q1: Failed to generate Diagnostic report ............................................ 61
Q2: How to print Diagnostic report ......................................................62
Q3: Failed to extract files .................................................................... 63
Q4: Mailbox supported ........................................................................63
Q5: How to make an appointment for remote support ........................ 63
Q6: How to generate and upload diagnostic log files ..........................63
Q7: How to switch languages ............................................................. 64
Q8: Failed to diagnose vehicle ............................................................64
Q9: Failed to activate or register .........................................................64
Q10: Failed to turn on when charging .................................................65
Q11: Failed to open the Diagnostic app ..............................................65
Q12: Why is my device draining battery so fast ..................................65
10 WARRANTY & SERVICES .................................................66
11 COMPLIANCE INFORMATION ..........................................67
FCC Compliance .................................................................................67
CE ....................................................................................................... 68
UKCA .................................................................................................. 68
1
1 GENERAL INTRODUCTION
The XTOOL IP616 smart diagnostic system is an advanced flatbed
scanning tool based on the Android operating system. It supports multi-
language switching and is suitable for different countries and regions. The
advantage of this obd2 scanner is not only its comprehensive functions,
including complete system Diagnostic, all obd2 functions, various reset
functions (IMMO / EEPROM adapter / EPB (Electronic Parking Brake)
reset / oil light reset / SAS (Steering Angle Sensors) reset / TPS (Throttle
Position Sensor) matching / Injector coding / ABS (Anti-block system)
bleed / gearbox matching / gear learning / electronic pump actuation /
disable transport mode / SRS (Supplemental Restrgint System) reset /
exhaust post-processing / BMS matching / air suspension / cylinder /
TPMS reset / tire refit / headlight adjustment / windows Initialization/seat
matching/DIY mode) can also achieve faster and more accurate
Diagnostic.
TABLET
FRONT VIEW OF TABLET
Fig 1-1 Front View of tablet
①
②
2
1Grip: this part used to hold the device by hand
2Operation Display: Display basic information such as S/N and model
etc.
The main unit of the IP616 is the tablet, which has a built-in VCI module,
which can be directly connected to the tablet and the car with the test line.
BACK VIEW OF TABLET
Fig 1-2 Back View of Tablet
The product model and S/N are laser-engraved on the back of the display
tablet, and the small hole at the bottom is the Loudspeaker.
1Nameplate: Display basic information such as S/N and model etc.
2Loudspeaker: external sound can be played, supporting the
playback of music, etc.
①
②
3
HOST PORTS
Fig 1-3 Tablet Host Ports
1USB Port: Data synchronization with PC.
2DB15 Port: This port is used to connect to the main test cable.
3DC charging port: This port is used for charging.
4Power Button: Long press to power on or off. In the power-on state,
short press the button to make the device enter sleep mode.
TECHNICAL SPECIFICATIONS
Table 1-1 Specification
Item
Description
Operating System
Android
Processor
2G
Memory
32GB
Display
7.0-inch touch screen with 1024 ×600
resolution
Connectivity
USB
Wi-Fi
Wired
①
②
③
④
Table des matières
Autres manuels Xtool Équipement de diagnostic
Xtool
Xtool EZ400PRO Manuel utilisateur
Xtool
Xtool Anyscan A30D Manuel utilisateur
Xtool
Xtool H6 Elite Manuel utilisateur
Xtool
Xtool A80 Manuel utilisateur
Xtool
Xtool PS70 Pro Manuel utilisateur
Xtool
Xtool PS70PRO Manuel utilisateur
Xtool
Xtool PS2 Manuel utilisateur
Xtool
Xtool H6 EB Manuel utilisateur
Xtool
Xtool Anyscan A30D Manuel utilisateur
Xtool
Xtool A30 Pro Manuel utilisateur
Xtool
Xtool IP508S Manuel utilisateur
Xtool
Xtool TP200 Manuel utilisateur
Xtool
Xtool IP819TP Manuel utilisateur
Xtool
Xtool D9 Pro Manuel utilisateur
Xtool
Xtool TP150 Manuel utilisateur
Xtool
Xtool D1 Pro Manuel utilisateur
Xtool
Xtool D7 Manuel utilisateur
Xtool
Xtool H6EB Manuel utilisateur
Xtool
Xtool N9EV Manuel utilisateur
Xtool
Xtool Nitro LT Manuel utilisateur
