Xterra MB550 Manuel utilisateur

MB550 INDOOR CYCLE

OWNER’S MANUAL

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW INDOOR CYCLE

Table Of Contents

ATTENTION

THIS INDOOR CYCLE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS

WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS

WARRANTY IN ITS ENTIRETY.

Product Registration

Important Safety Instructions

Important Operation Instructions

MB550 Assembly Instructions

Operation of Your New Indoor Cycle

Troubleshooting

Manufacturer’s Limited Warranty

MB550 Indoor Cycle

Record Your Serial Number

Please record the Serial Number of this tness product

in the space provided below.

Serial Number

The self-addressed product registration card must be completed in full and returned to

XTERRA Fitness. You can also go to www.xterratnessstore.com/warrantyreg.html

to register online.

Thank you for your purchase of this quality indoor cycle. Your new indoor cycle has been

manufactured by one of the leading tness manufacturers in the world and is backed by one

of the most comprehensive warranties available. XTERRA Fitness will do all we can to make

your ownership experience as pleasant as possible for many years to come.

If you have any questions about your new product or questions about the warranty contact

XTERRA Fitness at 1-800-258-8511. If you have a technical problem with your new indoor

cycle contact XTERRA Fitness technical service at 800-258-8511.

Please take a moment to record where you purchased your machine, as well as the date of

purchase for future reference. We appreciate your condence in XTERRA Fitness and we

will always remember that you are the reason that we are in business. Please complete and

mail your registration card today and enjoy your new indoor cycle.

Yours in Health,

XTERRA Fitness

Congratulations On Your New Indoor Cycle and Welcome to the XTERRA Fitness Family!

Product Registration

MB550_20180821

Purchase Location

Purchase Date

MB550 Indoor Cycle

WARNING - Read all instructions before using this appliance.

1. Use this equipment only for its intended use as described in this manual. Do not

attempt to ride this bike at high pedal speeds until you have ridden the bike for some

time and are comfortable riding at slower pedal speeds.

2. The bike is NOT equipped with a freewheel system which means that when the

ywheel is in motion, the pedals will be in motion. Do not attempt to stop the unit by

applying backward pressure to pedals while they are turning as knee injury may occur.

Do not attempt to remove your feet from pedals while they are moving.

3. Wait for ywheel to coast to a stop before dismounting the bike. If you want to stop the

ywheel, push down on the brake knob.

4. Serious injury or death may occur from over-training. Consult a medical doctor or

qualied tness instructor to determine an exercise program appropriate for your level

of tness.

5. Do not attempt to turn the pedal cranks by hand. Do not touch any driving mechanism

while it is in motion as possible injury could occur.

6. In a home setting, keep children away from the bike when it is not in use. Keep

children and pets away from the unit while it is in use.

7. Do not attempt to perform dip movements on handlebars.

8. Never drop or insert any object into any opening of the bike.

9. Only use the bike on a stable, level oor.

10.Follow instructions for safe use of the equipment including proper seat position,

handlebar position, and use of foot positioning system of pedals. Do not attempt to

pull up handlebar post and seat post over the ‘MAX.’ graduation.

11. For safe operation, allow for at least 1foot (30cm) of free space to either side of the

unit and 2 feet (60cm) of free space to the rear of the unit.

Regularly examine the bike for damage and wear. Inoperable components should be

replaced immediately or the equipment should not be used until it is repaired.

Failure to follow all guidelines may compromise the effectiveness of the exercise

experience, expose yourself (and possibly others) to injury, and reduce the longevity

of the equipment.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Safety Instructions

WARNING: This product can expose you to chemicals including Toluene and Acrylamide which

are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

MB550 Indoor Cycle

1. Obtain a complete physical examination from your medical doctor and enlist a health/

tness professional’s aid in developing an exercise program suitable for your current

health status.

2. When working out for the rst time, start out slowly for a minimum of ve minutes.

After your muscles are warmed up, gradually increase the pedaling speed and/or

resistance.

3. The speed and duration of your exercise program should always be subject to how

you feel. Never permit peer pressure to exceed your personal judgment while

exercising.

4. This exercise equipment is not intended for use by persons with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge.

5. Overweight or severely de-conditioned individuals should be particularly cautious

when using the equipment for the rst time. Even though such individuals may not

have histories of serious physical problems, they may perceive the exercise to be far

less intense than it

really is, resulting in the possibility of overexertion or injury.

6. Proper installation and regular maintenance are required to ensure user’s safety.

Maintenance is the sole responsibility of the owner.

Important Operation Instructions

WARNING - AS THE OWNER OF THIS EXERCISE EQUIPMENT, YOU SHOULD

INSIST THAT ALL USERS FOLLOW THE SAME GUIDELINES: YOU SHOULD MAKE

THIS MANUAL AVAILABLE TO ALL USERS.

MB550 Indoor Cycle

MB550 Assembly Pack Checklist

Hardware Step 1

#107. 3/8” x 19 x 1.5T

Flat Washer (4 pcs)

#106. 3/8” x 2”

Carraige Bolt (4 pcs)

Hardware Step 2

Hardware Step 6

#124. M6 x 12mm

Screw (1 pc)

Hardware Step 3

#113. 5/16” x 35 x 3.0T

Flat Washer (1 pcs)

#111. 3/8” x 25 x 2T

Flat Washer (1 pcs)

#110. 3/8” x 1-3/4”

Carriage Bolt (1 pcs)

#114. 5/16” x 23 x 2.0T

Flat Washer (1 pcs)

#112. 8 x 25

Quick Release Lever

#109. Wrench #117. Combination M5 Allen Wrench

& Phillips Head Screw Driver

#108. 3/8”

Cap Nut (4 pcs)

Assembly Tools



Assembly Pack Checklist

#117. Combination M6 Allen Wrench

& Phillips Head Screw Driver(1pc)

#109.14/15m/m_Wrench(1pc)

108. 3/8"

Cap Nut(4 pcs)

107. 3/8" x19 x 1.5T

Flat Washer (4pcs)

106. 3/8" x 2"

Carriage Bolt (4pcs)

112. 8x25

Quick Release lever (1 pc)

111. 3/8" x 25 x 2T

Flat Washer (1pc)

110. 3/8" x 1-3/4"

Carriage Bolt (1pc)

113. 5

16" x 35 x 3.0T

Flat Washer (1pc)

114. 5/16" x 23 x 2.0T

Flat Washer (1pc)

124. M6 x12mm

Phillips Head Screw (1pc)

MB550 Indoor Cycle

1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift

Box over the unit and unpack.

2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged

parts are found, or parts are missing, contact us immediately.

3. Locate the hardware package. Remove the tools rst. Remove the hardware for each step as

needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item

number from the assembly drawing for reference.

Pre-Assembly

Hardware Step 1

1. Install the front and Rear Bar (2) (3) with four Carriage Bolts (106), four

Flat Washers (107) and four Cap Nuts (108). The front and rear stabiliz-

er are different. Be sure to assemble the stabilizer with the wheels onto

the front of the bike. by using 14/15mm Wrench (109).

Stabilizer Tubes

#106. 3/8” x 2

Carriage Bolt (4 pcs)

#107. 3/8” x 19 x 1.5T

Flat Waher (4 pcs)

#108. 3/8”

Cap Nut (4 pcs)

MB550 Assembly Instructions

1. Install the Cover Front (L)(95) with one Phillips Head Screw (124) by us-

ing Combination M5 Allen Wrench & Phillips Head Screw Driver (117).

Hub Cover

Hardware Step 2

#124. M6 x 12mm

Screw (1 pcs)

MB550 Indoor Cycle

Handlebar

3Hardware Step 3

#113. 5/16” x 35 x 3.0T

Flat Washer (1 pc)

#114. 5/16” x 23 x 2.0T

Flat Washer (1 pcs)

#112. 8 x 25

Quick Release Lever

1. Install the handlebars (6) and Handlebar Post (4) together with Quick

Release lever (112) and one Flat Washer (113) and one Flat Washer

(114) and one Button Head Socket Bolt (20) by using Combination M5

Allen Wrench & Phillips Head Screw Driver (117).

Pedals

1. Install the Left (104L) and Right (104R) pedals to the crank arms. Please

note that the Left pedal has a reverse threaded bolt and needs to be

tightened in a counterclockwise direction. The pedals are identied by

either an R or L stamped into the end of the bolt.

MB550 Indoor Cycle

Water Bottle Holder

5Hardware Step 5

Hardware Step 6

#110. 3/8” x 1-3/4”

Carriage Bolt (1 pc)

#111. 3/8” x 25 x 2T

Flat Washer (1 pc)

Hardware pre-installed

1. Secure Drink Bottle Holder (105) on the Main Frame (1) by using Com-

bination M5 Allen Wrench & Phillips Head Screw Driver (117) to tighten

two Phillips Head Screws (26).

Seat

1. Assemble sliding seat mount (7) on top of seat post (5). Slide carriage

bolt (110) from top downwards through sliding seat mount (7), seat post

(5) and at washer (111). Assemble seat fore/aft adjustment knob (103)

and secure tightly.

MB550 Indoor Cycle

Console

1. Use the wire-ties to hold the console mount and rubber protective pad on

the front of handlebar (be aware of the console mount orientation). Pull

wire-tie tight and cut off the excess.

2. Set the console in into the console mount in a clockwise orientation.

Load the transmitter with batteries, connect the sensor cable which is

already on the unit, and secure the transmitter to the frame with quick

tape as shown. (Replace console battery if no digits are shown on LCD)

Table des matières

Autres manuels Xterra vélo d'appartement

Xterra

Xterra SB550 Manuel utilisateur

Xterra

Xterra FB160 Manuel utilisateur

Xterra

Xterra UB1.5 Manuel utilisateur

Xterra

Xterra 16468451US Manuel utilisateur

Xterra

Xterra SB4.5r Manuel utilisateur

Xterra

Xterra FB360 Manuel utilisateur

Xterra

Xterra MB880 Manuel utilisateur

Xterra

Xterra SB500 Manuel utilisateur

Xterra

Xterra MB8.5 Manuel utilisateur

Xterra

Xterra MB880 Manuel utilisateur

Xterra

Xterra UB120 Manuel utilisateur

Xterra

Xterra XB 78 Manuel utilisateur

Xterra

Xterra 16416525 Manuel utilisateur

Xterra

Xterra 16204791500 Manuel utilisateur

Xterra

Xterra SB540r Manuel utilisateur

Xterra

Xterra R15 Manuel utilisateur

Xterra

Xterra 16467200US Manuel utilisateur

Xterra

Xterra UB2.5 Manuel utilisateur

Xterra

Xterra 16467450US Manuel utilisateur

Xterra

Xterra UB2.5 Manuel utilisateur

Xterra

Xterra 16416852 Manuel utilisateur

Xterra

Xterra 16416880-1 Manuel utilisateur

Xterra

Xterra SB2.5 Manuel utilisateur

Xterra

Xterra MB500 Manuel utilisateur

Manuels vélo d'appartement populaires d'autres marques

Weslo

Weslo Vector 302 Guide de démarrage rapide

TOORX

TOORX BRX85 Manuel utilisateur

Matrix

Matrix KranKcycle Manuel utilisateur

Matrix

Matrix IC3 Manuel utilisateur

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manuel utilisateur

Monark

Monark 827E Manuel utilisateur

Stamina

Stamina 1310 Manuel utilisateur

American Fitness

American Fitness SPR-BK1072A Manuel utilisateur

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manuel utilisateur

BH FITNESS

BH FITNESS H9158H Manuel de l'opérateur

Body Sculpture

Body Sculpture BC-7220G Manuel utilisateur

Cateye

Cateye EC-2300 Manuel utilisateur

FYTTER

FYTTER RACER RC MSR Manuel utilisateur

Kikos

Kikos HM-9090M Manuel utilisateur

Pro-Form

Pro-Form 345 Zlx Bike Guide de l'utilisateur

Fuel Fitness

Fuel Fitness SU135-40 Manuel utilisateur

NordicTrack

NordicTrack Gxr 4.2 Bike Manuel utilisateur

Vision Fitness

Vision Fitness U70 Manuel utilisateur