Xqisit 2.0 Manuel utilisateur
xqisit 2.0
EN
Quick start Guide
xqisit 2.0
Put into „On“ Position
Long Press
Power On/O
Hold until
Flashing Blue + Red LED
Connect to your Device
EN
1 Battery Indicator
2 O & On Button
3 USB Port
4 3.5 mm Aux-in
5 Rewind
6 Phone, Play / Pause
7 Forward
8 Volume –
9 Power / Pair
10 Volume +
Features
• Bluetooth version 2.1 + EDR with Special Audio Algorithm and DSP for clean, best-in-class wireless stereo sound
• Two 35 mm full range drivers deliver superb music delity
• Passive Woofer
• Convenient charging with USB charging cable
• Rechargeable Lithium-ion battery for up to 5 hours of playtime
• Voice Prompting (English)
• Battery Indicator on iPhone and Blackberry
1) Anatomy
Button (in Bluetooth Music):
A Previous Track
B Play / Pause
C Next Track
D Volume -
E Power / Pair (Press and hold / Press long)
F Volume +
Button (during the phone call):
A (during the call): Mute / Unmute the Microphone
B (during Ringing): Answer Call (Short press) / Reject Call (Long press)
B (during the call): End of Call (Short press) / Toggle between Phone (Long Press)
C Volume –
D (during the call): Mute / Unmute the Microphone
F Volume +
Button (in General without Bluetooth connection):
E Power ON/OFF (Long press); Entry Pairing mode (Hold pressing from OFF)
Button (in Aux-in Music):
E Power OFF
Passive
Radiator
Subwoofer
O and On Button
Aux-in
Port
USB Charging Port
2) Power up xqisit 2.0
• Charge up xqisit 2.0 whenever it is needed by plug into computer via the USB cable
• Make sure the slide button is in the positon: “ON”
• Press key on the top panel until the front LED turns into blue
Remark: Fully charge xqisit 2.0 at least once a month
3) Pairing to xqisit 2.0
• Select a BT 2.0 or above device (mobile phone or music player) and turn on BT connection
• Activate your BT device to the searching mode (new device searching).
• Press and hold key until the front LED ashes in BLUE/RED, xqisit 2.0 has 3 mins (searchable time)
for your BT device to pair with.
• <<xqisit 2.0>> will be displayed in your BT device and select it for pairing. “0000” is the pairing code if necessary.
(Pairing code is not necessary for the iPhone, iPod , and iPad)
• Beep sound will be given when xqisit 2.0 is successfully paired and ashing stops
Remark: Pairing steps are for 1st time connection, automatic connection is allowed on most BT devices except iPhone
• Double check with your BT device to see if “xqisit 2.0” is connected.
You may also get into this pairing process by just pressing and holding the button: when the LED changes to
Red/Blue, release the button for pairing process; otherwise the unit will turn OFF.
Remark: xqisit 2.0 also stops ashing with a dierent sound to indicate pairing failure aer the 3mins.
4) Active Pairing on xqisit 2.0 (Alternative way to pair)
• Put your Bluetooth Device into the discovery mode, and put it close to the xqisit 2.0
• Get into the pairing process with the same procedure as shown in the 3), and wait for about 20s
• The “Pair Invitation” will pop-up on your Bluetooth Device, and just click the “Accept”.
“0000” is the pairing code if necessary.
5) Listening to xqisit 2.0
• Stay connected to xqisit 2.0 via BT, repeat the pairing step if it has been disconnected
• Select music to play in BT device
• Press for Play / Pause
• Press for next song
• Press for previous song
• Press + or – to adjust volume level or adjust it from your BT device
• Press and hold key until LED light o to switch o
6) Talking via xqisit 2.0
Remarks: Only available on BT mobile with HFP/HSP
• Press for answering a call
• Press & hold for rejecting the call
• Press to hang up when the call nish
• Press & hold during the call to switch between xqisit 2.0 and mobile
• Double Press to answer a call from 3rd party
• Double Press to toggle between original call and 3rd party
AE
B
F H
C
G I
D
8) Specications
• Total 6W output (3W / Channel)
• Full-range (35mm) driver / Channel + Passive Radiator
• Distortion <= 10 %
• S/N ratio: >75dB@1W
• Frequency Response: 150Hz – 15k Hz
• Li-polymer battery: 1150mAh
• Playtime: 5 hours in 80% Volume
• Recharging Time: 2hours
Power O
→ No Light
Power On
Battery Level <10%
→ Flashing Red
→ Enforced Power O in 5 mins
Pairing
→ Fast Flashing between
Blue & Red
Power On
Battery Level >60%
→ Solid Blue
Charging
No Matter Power On / OFF
→ Flashing Blue
Power On
Battery Level <30%
→ Solid Red
Power O
+ Full Charged
→ No Light
Mic muted
(during handsfree-mode)
→ Flashing blue
Upgrade mode
(USB attached)
→ Solid red
7) Front light indicator
9) Compatibility (Bluetooth device)
• BT 2.0 or above device with A2DP / AVRCP / HFP/ HSP
• AAC music streaming support iOS 4.3.3 or higher version ONLY
10) Trouble Shooting
Sound not clear or no sound
→ Please check xqisit 2.0 or BT device volume level
Music playback is not transfered from BT device to xqisit 2.0
→ Make sure your BT device has A2DP
→ Check if both devices are connected
→ Restart xqisit 2.0 for auto connection with your BT device
LED no power
→ Make sure xqisit 2.0 is fully charged.
Sound is too small / too much distortion
→ Adjust the volume level of xqisit 2.0 or BT device
Phone call is not answered by xqisit 2.0
→ Make sure your mobile has HSP / HFP
→ Check if both devices are connected
→ Restart xqisit 2.0 for auto connection with your BT device
Music playback is not resumed aer hanging up a call
→ Press play to resume music
No music control by xqisit 2.0
→ Make sure your BT device has AVRCP
Warning
Please read these safety warnings and cautions carefully to ensure your personal safety and prevent property damage.
Fire and Electric Shock Hazard
• Do not expose your xqisit xqisit 2.0 to liquid, moisture, humidity, or rain.
Do not use the xqisit xqisit 2.0 near a bathtub, sink, sauna, pool, or steam room.
Exposure of the xqisit xqisit 2.0 to moisture could result in electric shock.
• Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign
objects in to the xqisit xqisit 2.0 . Such actions could result in electric shock.
• Clean the xqisit xqisit 2.0 only with a dry cloth.
• Do not expose your xqisit xqisit 2.0 to extremely high or low temperatures.
• Do not leave your xqisit xqisit 2.0 in direct sunlight for extended periods of time.
• Do not leave your xqisit xqisit 2.0 near open ames such as cooking burners, candles, or replaces.
• Do not block any ventilation openings.
Battery/Charger Hazard
• Do not dispose of your xqisit xqisit 2.0 in a re. The battery could explode causing injury or death.
• Only charge the battery in accordance with the user instructions supplied with the xqisit xqisit 2.0 .
• Do not attempt to disassemble the xqisit xqisit 2.0 or force open the built-in battery because this may result
in electric shock.
• Do not charge the xqisit xqisit 2.0 in damp areas or in extremely high or low temperatures because this could result in
electric shock.
• Do not clean the xqisit xqisit 2.0 when it is being charged. Always unplug the charger rst before cleaning the Xqisit
xqisit 2.0 .
Automobile Accident Hazard
• Do not leave or store the xqisit xqisit 2.0 or any of its accessories near or over your automobile’s air bag because
serious injury may result when an airbag deploys.
Fall Hazard
• Do not place the xqisit xqisit 2.0 on high surfaces such as shelves. During music playback the xqisit xqisit 2.0 may
move which could cause the xqisit xqisit 2.0 to shi and fall o of the edge.
Table des matières
Langues :
Autres manuels Xqisit Intervenants
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur