Xerox Stacker 701P98048 Manuel utilisateur
Stacker 1000
Operator Manual
701P98048
Welcome!
Congratulations on acquiring the Stacker 1000. Team
looks forward to supporting you and helping you increase
your organizational productivity. The integrated features, ease
of operation, and reliability of the Stacker 1000 allows you
to concentrate on your business and leave the printing and
finishing to the Stacker 1000.
This user manual provides all the necessary information
required for operating and using the Stacker 1000.
Your Team support group is available to you for further
assistance. Call our experts at the appropriate phone number
listed at the right.
The following information is needed whenever you call :
Customer Account Number:____________________________
Stacker Serial Number: _______________________________
In order to locate the Stacker Serial Number, refer to the
section of this operator manual entitled “Technical data.”
©1998 by
Corporation. All rights reserved.
®, The Document Company™, the stylized
™, Stacker 1000®, 8830™, and any
identifying product names and numbers herein are trademarks of
Corporation.
Printer Serial Number:_________________________________
In order to locate the Printer Serial Number, refer to the printer
operator manual.
All service calls should be reported under the printer serial
number.
For information or assistance on your
Stacker 1000, call:
Local Telephone Number: ______________________________
A Customer Support Representative will answer any questions
or concerns you may have regarding your Stacker 1000.
In order to purchase other equipment,
software, and/or supplies, call:
Local Telephone Number: ______________________________
A Sales Representative will assist you in evaluating your
needs for other software applications and/or xerographic
equipment which will further increase your productivity.
Stacker 1000 Operator Manual i
Table of contents
Table of contents
Safety notes .......................................................1
Stacker overview ...............................................3
Introduction ...............................................................3
Identifying the stacker parts ....................................3
Stacker operation......................................................4
Switching on the stacker
........................................4
Normal operation
....................................................4
Tray extensions
......................................................4
Media storage compartments
.................................5
Print size information
.............................................5
Problem solving.................................................6
Jam clearance ...........................................................6
Clearing media jams...................................................
6
Moving the stacker....................................................7
Problem solving ........................................................7
Technical data....................................................8
Stacker relocation.....................................................8
Technical data ...........................................................8
Space requirements....................................................
8
Dimensions .................................................................
9
Printer media information..........................................
9
Stacker capacity.........................................................
9
Electrical requirements..............................................
9
Power consumption.................................................
10
Temperature .............................................................
10
Heat dissipation .......................................................
10
Audible noise............................................................
10
Power cord length....................................................
10
Features....................................................................
10
Stacker serial number location.............................. 10
ii
Stacker 1000 Operator Manual
Table of contents
Stacker 1000 Operator Manual 1
Safety notes
Safety notes
The Stacker 1000 is designed and tested to meet strict
safety requirements. These requirements include safety
agency examination and approval and compliance to any
established environmental standards. Please read the following
instructions carefully before operating the stacker.
Note: In order to ensure safe operation of your stacker,
refer to the instructions, as needed, which are provided
in this operator manual.
Follow all the warnings and instructions which are marked on
or supplied with the product.
Unplug the stacker from the wall outlet before cleaning.
Always use materials which are supplied or approved by Xerox.
The use of other materials may result in poor performance and
could create a hazardous situation.
Do not use aerosol cleaners.
Never use supplies or cleaning materials for any purposes
other than what they were intended. Keep all supplies and
materials out of the reach of children.
Do not use the stacker near water, wet locations, or outdoors.
This product is equipped with a three-wire, grounding-type
plug (in other words, a plug which has a third grounding pin).
This product also is equipped with an additional safety device.
The plug fits into a grounding-type power outlet only. This is a
safety feature. If you are unable to insert the plug into the
outlet, contact your electrician in order to avoid the risk of
electric shock and have the receptacle replaced. Never use a
ground adapter plug to connect the copier to a power source
receptacle which lacks a ground connection terminal.
This stacker must be operated from the type of power source
which is indicated on the marking label. If you are not sure of
the type of power available, consult your local power company.
If an extension cord is used with this stacker, ensure that the
total of the ampere ratings of any products plugged into the
extension cord does not exceed the extension cord ampere
rating. Also, ensure that the total amperage of all products
plugged into the wall outlet does not exceed the outlet
protection.
Do not install the stacker in a direct sunlit area, in a high
humidity or dusty environment, nor in a double-insulated room.
2
Stacker 1000 Operator Manual
Safety notes
Do not install the stacker where the floor or base is unstable.
The stacker may fall, causing personal injury and/or serious
damage to the stacker.
Never spill liquid of any kind on the stacker.
Do not allow anything to rest on the power cord. Do not locate
this stacker where people step on the cord.
Never remove any covers or guards that require a tool for
removal. There are no operator-serviceable areas within these
covers.
The power supply cord is the disconnect device for this
stacker. Ensure that installation is near the outlet and is easily
accessible.
Never attempt any function that is not specified in this operator
manual or is not directed by an authorized Xerox
representative.
Unplug this stacker from the wall outlet and refer the servicing
of it to qualified service personnel under the following
conditions:
• when the power cord is damaged or frayed;
• if liquid is spilled into the product;
• if the stacker is exposed to rain or water;
• if the stacker is producing unusual noises or odors;
• if the stacker falls over or the cabinet is damaged;
• if the stacker continues to malfunction or not work after the
procedures in this operator manual are performed.
Stacker 1000 Operator Manual 3
Stacker overview
Stacker overview
Introduction
The Stacker 1000 is an optional finishing device which may be
used with the 8830 printer, the 8830 Digital
Document System (DDS), or the Productivity Centre
8233. The illustration below shows the Stacker 1000 with a
8830 printer.
The Stacker 1000 stacks a maximum of 1000 prints of various
sizes. Print sizes include A (A4) through E (A0). Depending on
the print size, prints are stacked either by:
• Long edge feed (LEF), also called landscape,
or
• Short edge feed (SEF), also called portrait.
Identifying the stacker parts
Media storage
compartment
(one on each
side of stacker)
Tray
extensions
(for longer-
size prints)
4
Stacker 1000 Operator Manual
Stacker overview
Stacker operation
6ZLWFKLQJRQWKHVWDFNHU
The stacker is “switched on” by connecting the power cord to
the power outlet.
There is no power switch. The power cord is the on/off
switch.
Once the power cord is connected to the power outlet, the
stacker motor drive and fan initialize.
1RUPDORSHUDWLRQ
As media leaves the printer, the lead edge of the media enters
the stacker. A motion sensor in the stacker detects the lead
edge of the media and the fan and motor are switched on. The
media then is fed into the stacker inclined tray.
When the motion sensor detects the trail edge of the media, the
fan and motor continue to run until the print is fed into the
inclined tray. After the last print output is fed into the stacker
tray, the fan and motor switch off.
7UD\H[WHQVLRQV
The Stacker 1000 is equipped with tray extensions:
These tray extensions are used for E-size (A0) and longer-size
prints.
Tray
extensions
Stacker 1000 Operator Manual 5
Stacker overview
0HGLDVWRUDJHFRPSDUWPHQWV
As stated before, the Stacker 1000 is equipped with two storage
compartments. They are located on each side of the stacker.
These storage compartments may be used to store media,
prints, or other printer supplies, such as toner cartridges.
3ULQWVL]HLQIRUPDWLRQ
As stated before, the Stacker 1000 stacks a maximum of 1000
prints; these prints may be of various media sizes. Depending
on the print size, the stacker can hold the following quantities:
• D-size (A1) landscape prints: 750 maximum
• E-size (A0) portrait prints: 375 maximum
The stacker can actually hold a larger number of prints
than is shown above. The above numbers reflect the
maximum capacity of the 8830 printer with three rolls of the
same type media loaded.
Media storage
compartment
6
Stacker 1000 Operator Manual
Problem solving
Problem solving
Jam clearance
The stacker does not detect error conditions such as media
jams. If a media jam occurs, the motor drive and blower
switches off, and the stacker no longer accepts media. This is
the only indication that the stacker is no longer functioning.
Media jams may occur as the media is exiting the printer or as
the media is entering the stacker. When jams occur, the
stacker and printer shut down, and the printer displays an error
code.
Media must be cleared from the stacker and the printer, if
necessary, before a print job can continue.
&OHDULQJPHGLDMDPV
Use the following procedure in order to clear a media jam from
the stacker:
1. Move the stacker by pulling the entire stacker outward and
away from the printer.
2. Clear any visible, jammed media from the stacker media
path.
If
part
of the media is located in the printer media path,
clear the stacker media path first. Refer to the printer
operator manual in order to clear the printer media path.
3. If the media, which is exiting the printer, is still connected to
the media roll inside the printer, cut the media between the
printer and stacker. Refer to the printer operator manual for
more information on how to cut the media.
4. Once the media path is cleared, reposition the stacker
against the printer.
Ensure that the stacker is positioned correctly. The
stacker must be resting against the printer and aligned
with the output area of the printer.
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Xerox Accessoires pour imprimantes
Xerox
Xerox WorkCentre Pro 123 Manuel utilisateur
Xerox
Xerox 6130N - Phaser Color Laser Printer Manuel utilisateur
Xerox
Xerox Phaser 8200 Manuel utilisateur
Xerox
Xerox 7500DX - Phaser Color LED Printer Manuel utilisateur
Xerox
Xerox DOCUCOLOR 12 Instructions d'installation et d'utilisation
Xerox
Xerox 5400DX - Phaser B/W Laser Printer Manuel du propriétaire
Xerox
Xerox HP Toner Cartridges 6R941 Manuel utilisateur
Xerox
Xerox Phaser 6128 MFP Manuel utilisateur
Xerox
Xerox 5500DN - Phaser B/W Laser Printer Manuel utilisateur
Xerox
Xerox 5400DX - Phaser B/W Laser Printer Manuel utilisateur
Xerox
Xerox C123 Copycentre Manuel utilisateur
Xerox
Xerox 6130N - Phaser Color Laser Printer Manuel utilisateur
Xerox
Xerox 5500DN - Phaser B/W Laser Printer Manuel utilisateur
Xerox
Xerox VLB70 Series Manuel utilisateur
Xerox
Xerox Phaser 6180MFP Manuel utilisateur
Xerox
Xerox WorkCentre Pro 123 Manuel utilisateur
Xerox
Xerox WorkCentre 123 Manuel utilisateur
Xerox
Xerox DocuColor 12 CP Manuel utilisateur
Xerox
Xerox 3100MFPX - Phaser B/W Laser Manuel utilisateur
Xerox
Xerox WorkCentre 118 Manuel utilisateur
