Xciel XCRiPad Instructions d'installation

Safety Instructions & Regulations

1.Area of application

The XCRiPad2/3/4 is an Intrinsically Safe (ic) Ruggedized iPad (generation 2 or 3

or 4) solution that is designed for industrial use in potentially explosive areas

classified as C1D2 / Zone2 in accordance with directive 94/9/EC.

2. Safety precautions

These safety instructions contain information and safety regulations that must be

observed to ensure safe operation under the described conditions. Failure to follow

these instructions and this information can have serious consequences or constitute

a violation of the applicable regulations.

Please read through these safety instructions carefully before starting to use the

device! In the event of conflicting information, the safety instructions shall take

precedence. In the event of any doubt, please contact Xciel.

3. Faults and damage

If there are grounds for you to believe that the safety of the device has been

impaired, stop using it and remove it from the hazardous area immediately.

Measures should be taken to prevent the device from being used again

accidentally.!The safety of the device may be impaired under the following

circumstances:

- The housing is visibly damaged.

- The device has been exposed to excessive loads.

- The warranty seal is damaged or has been removed.

- The device has not been stored properly.!

- The device has been damaged in transit.!

- The marking or labeling on the device is illegible or non-existent.

- Malfunctions occur.

!- The permitted limit values have been exceeded.

4. Safety regulations

By using the XCRiPad2/3/4, it is assumed that the user has observed the generally

applicable safety regulations and that he/she has read the EC Declaration of

Conformity to prevent any incorrect use of the device.!The following must be

observed without fail:

- It is prohibited to use a display protection film.

- The iPad2/3/4 should not be removed from the rubber casing. A broken

warranty label indicates that the intrinsic safety of the device is no longer

guaranteed.!

- The specially designed nylon case should not be removed in the Ex-area.!

- The iPad2/3/4 should not be charged in the Ex-area.

- It must be ensured that the device is not taken into, or used in, hazardous

areas classified as C1D1 or zone 0, 1 or 20, 21, 22.

- Do not submerge the XCRiPad2/3/4 under water.

- Do not use or unplug the headset port in hazardous areas.

Failure to observe these safety instructions will result in expiration of the C1D2 /

ATEX Zone 2 Intrinsic Safety rating.

5. Ex-data

Classification: Class I, Division 2, Group A-D T6

Classification: ATEX Zone2, Ex ic IIC T5 Gc

Approved for Zone 2, Intrinsic Safety (ic), explosion group IIC (explosive gases,

vapors or mist), temperature class T5.

Autres manuels pour XCRiPad

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Xciel Accessoires pour tablettes

Xciel

Xciel XCTab Manuel utilisateur

Manuels Accessoires pour tablettes populaires d'autres marques

Armodilo

Armodilo ALUR Manuel utilisateur

Thor’s Drone World

Thor’s Drone World Lifthor Mjolnir Manuel utilisateur

EARTO

EARTO A1876 Manuel utilisateur

Pyle

Pyle PSPADLK8 Manuel utilisateur

MOB

MOB TUANUI Manuel utilisateur

Logitech

Logitech Hinge Manuel utilisateur

Bretford

Bretford PowerRack 10 Manuel utilisateur

Brenthaven

Brenthaven EDGE 360 Manuel utilisateur

Fujitsu

Fujitsu Stylistic 3400 Manuel utilisateur

Heckler Design

Heckler Design WindFall STAND Manuel utilisateur

Kensington

Kensington KeyFolio SecureBack Manuel utilisateur

Xplore

Xplore Companion Keyboard Manuel utilisateur

Logitech

Logitech Ultrathin Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA X MINI Manuel utilisateur

Trust

Trust Executive Folio Stand Manuel utilisateur

Manhattan

Manhattan 406017 Manuel utilisateur

Logitech

Logitech SLIM COMBO Manuel utilisateur

Logitech

Logitech AnyAngle iC1051 Manuel utilisateur