Wright Manufacturing Mower Manuel utilisateur

WARNING: READ THIS MANUAL BEFORE USING

Commercial Mower Owner’s Manual

For Stander Serial # 17124 and higher until superceded

For your safety and for proper operation and maintenance read

carefully and keep readily available for future reference.

WMI Part# 79490072

Additional replacement owner's manuals (Part # 7940072), as well as an

illustrated parts lists (Part # 79490100 for 36" and 42" decks and #7940071

for 48", 52" and 61"), are available from your authorized Wright Dealer for a

nominal charge or if a dealer is not available by contacting Wright Manufac-

turing, Inc. Please indicate the complete model number and serial number

of your Wright product.

WRIGHT MANUFACTURING, INC.

4600X WEDGEWOOD BLVD

FREDERICK, MD 21703

Foreword

Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on

giving you advanced engineering and quality construction in each mower we build.

This manual explains the features and promotes safer use of the mower. Please read it and follow the instruc-

tions carefully so that you can have many years of productive mowing.

For service, remember that your Wright dealer knows your mower best and is interested in your satisfaction.

He can provide you with quality maintenance and other assistance that you may need.

Please give this manual to anyone who may use the mower for them to study before they operate it. Give the

manual to anyone to whom you may sell the mower in the future. It is important that the next owner receive

this information also.

As Wright Manufacturing, Inc. is constantly seeking ways to improve its products, the mower you have may

differ slightly from the information and specifications in this manual. Because of our continuous product

improvement, Wright reserves the option to make changes at any time without notice.

Wright Manufacturing, Inc.

SAFETY ALERT

This is the safety alert symbol. It is used throughout this manual and on

the mower’s safety labels to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury

or death. Read these instructions carefully. It is essential that you read the

instructions and safety precautions before you attempt to work on or use

this unit.

This symbol with the word “WARNING” indicates a potentially hazardous

situation which, if not avoided, could result in death or serious injury.

permission from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2 and Stander are trademarks of Wright

Manufacturing, Inc.

Rev. 2/13/02 \\Server01\company\Marketing\Pagemaker\Product Specific Documents\Stander\Stander Owners Manual 021302.p65

WARNING

CAUTION

This symbol with the word “CAUTION” indicates a potentially hazardous

situation which, if not avoided, may result in minor or moderate injury.

Table of Contents

Subject Page

Safety Instruction Manual 1-6

Introduction 1

General Safety Instructions 1

Owner/User Notice 1

User Experience and Qualifications 1

User Clothing 2

Inspect Mower Before Each Use 2

Scheduled Mower Maintenance Safety 2

Work Area Conditions and Inspection 2

Initial Operating Safety Guidelines 3

Operation On Slopes 3-4

Replacement Parts 4

Operation In Reverse 5

Operation In Forward Direction 5

Operation During Zero-Radius Turns 5

Fuel Safety 5

Hydraulic Safety 5

Pre-Delivery Service of Mower 6-7

Operating Instructions 8-11

Inspect Mower Before Each Use 8

How to Start the Mower 8

Unusual Noises or Irregular Operation 8

How to Drive the Mower 8

How to Stop and Park the Mower 9

How to Drive the Mower Over a Curb 9

How to Use the Mower on Varying Terrain 9

How to Change the Speed/Sensitivity Adjustment 10

How to Perform the Tracking Adjustment 10-11

How to Test/Use the Blade Clutch/Brake Switch 11

How to Test the Operator Presence Control (OPC) Switch 11

Service and Adjustments 11-13

Tire Maintenance and Pressure 11

Hydraulic Motor Support Adjustment 11

Blade Adjustments and Height of Cut 11-12

Belt Tension Adjustment 12

How To Move the Mower if the Engine Won't Start 12

Bleeding Air from the Hydraulic System 12

Battery Service 13

Maintenance Service Intervals 14-15

"Break-in" Period 14

Other Intervals 14-15

Limited Warranty 16

WARNING

Safety Instruction Manual

INTRODUCTION

This mower is built to the highest standards in the

industry. However, carelessness or operator error

may result in serious bodily injury or death. Acci-

dent and hazard prevention are dependent upon

the awareness, concern, wisdom, and proper

training of the personnel involved in the operation,

transport, maintenance, and storage of the equip-

ment. Make sure every operator is properly

trained and thoroughly familiar with all of the

information in this manual before operating the

equipment.

GENERAL SAFETY INSTRUCTIONS

The Wright Stander is designed with your safety

in mind. It has the following safety systems that

you should be familiar with:

The warning decals on the mower including

the instrument panel warning

The blade switch must be “off” before start-

ing the engine

You must be standing on the foot platform in

order to engage the blades

You must be standing on the foot platform in

order for the engine to run if the blades are

engaged

If you get off of the foot platform while the

blades are running the engine will stop and

the blades will brake in seconds

The hand controls are locked if the parking

brake is on

Letting go of the hand controls will stop the

wheels instantly

Spring loaded chute deflector helps reduce

trajectory of thrown objects

Belt/pulley covers on cutter deck and at rear

under pump pulleys

Anti-tip rollers are provided at the rear of the

mower to minimize the possibility of tipping

back and over on the operator

This symbol with the word “WARNING”

indicates a potentially hazardous situa-

tion which, if not avoided, could result in

death or serious injury.

WARNING

TO WRIGHT MOWER USERS & OWNERS: READ THIS

MANUAL BEFORE USING. PLEASE BE CAREFUL!

page 1

WARNING

CAUTION

This symbol with the word “CAUTION”

indicates a potentially hazardous situa-

tion which, if not avoided, could result in

minor or moderate injury.

Owner/User Notice:

The owner’s/user’s obligation is to instruct

themselves and all potential users in the safe

operation of this equipment and be sure they

read and follow the instructions in this safety

manual and other material provided by Wright

Manufacturing, Inc. before using or allowing

others to operate the equipment. Do not operate

this unit unless you carefully read, understand

and follow the assembly, installation, and safety

instructions contained in this manual and the

warning decals provided on the unit. Do not

allow other persons to use this unit unless you

make sure they carefully read, understand and

follow these instructions. Never allow children to

operate or play on the unit.

User Experience & Qualifications:

This product is designed for use by physically fit,

experienced, professional commercial mower

operators who have a minimum of 160 hours of

experience operating twelve horsepower and

greater industrial mowers. Operators must be

18 years or older and weigh at least 120 lb. and

no more than 350 lb. They must have read and

understood this manual. DO NOT allow children

to operate the mower. Do not allow adults to

operate the mower without proper instruction

mentioned above. Never allow passengers on the

mower.

WARNING

User Clothing:

DO NOT operate the mower while wearing

sandals, tennis shoes, sneakers, or shorts.

Always wear long non-baggy pants. Wear high-

top leather work boots with thick, textured

tread, soft-rubber soles at all times. Hard or

smooth soled shoes are too slippery for a good

footing on mower platform. NEVER wear loose-

fitting clothing which could get caught in moving

parts. Wearing safety glasses, ear protection

and safety shoes is advisable and required by

some local ordinances and insurance regula-

tions.

Inspect Mower Before Each Use:

DO NOT use the mower if any parts are not

maintained in good operating condition. Examine

the moving parts prior to each use. Look for

excessive wear, bald or worn tires, cracks in

parts, loose or missing bolts, cotter, linchpin or

“hair” pins and replace before operating the

mower. Make sure all safety equipment pro-

vided with the mower is in good operating order,

including all the warning decals and the required

operator-presence device which stops the

engine and blades when the foot-operated

Operator Presence Control (OPC) switch is

released. (To test the OPC, follow instructions

in the Operating Instructions section of this

manual.) Inspect the two anti-tip rollers and their

respective bolts at the rear of the mower for

tightness and proper operation. Ensure that all

parts of the hand-operated transmission control

system are tight and secure. This is to reduce

the possibility that the mower could have a loss

of control or safety.

Scheduled Mower Maintenance

Safety:

Replace worn tire(s) with less than 3/32" of any

tread groove left. Use tires with the tread pattern

specified by Wright Mfg., Inc. only. Grease all

fittings daily. DO NOT change the engine gover-

WARNING

page 2

nor settings or over-rev the engine contrary to

engine manufacturer specifications. Keep the

Wright mower in good operating condition, and

keep safety devices and shields in place and in

working condition. Keep all nuts, bolts, and

screws tight to be sure the equipment is in safe

working condition. Check the blade mounting

bolts for proper tightness every eight (8) hours of

operation. Check the blades for excessive wear

and sharpness every four to eight (4-8) hours of

operation. Replace excessively worn blades.

Sharpen dull blades. The mower should not be

used after the blades or other part of the mower

strikes a foreign object, until conducting a thor-

ough inspection and any damage is repaired.

See the instructions in the Recommended Main-

tenance section of this manual for other items of

required maintenance.

Work Area Conditions and Inspection:

Prior to operating the unit carefully inspect all

lawn/ground areas where you plan to use the

mower for hidden, hard-to-see objects or un-

even ground that may be hidden in the grass.

Clear the work area of moveable objects such

as wires, rocks, glass, etc. that might be picked

up by the mower and dangerously thrown.

Remove, if possible, or mark the location of all

immovable objects or irregular areas and be

sure not to hit them with any part of the mower,

its deck or the blades. Obstacles such as holes,

abrupt changes in ground contour, tree trunks,

stumps or roots, stub pipes protruding from the

ground, paving edges, etc. in the path of opera-

tion can abruptly turn or stop the mower. This

could throw you off the mower or into and

possibly over the handle bars causing serious

injury or death. The faster you are moving the

more potential there is for injury. Mow only in

daylight or in good artificial light. Keep away

from drop-offs, the edges of ponds, streams,

pools, etc. especially at the bottom of slopes.

Do not mow when children or others are around.

When the Wright mower is in use, never direct

the grass discharge toward bystanders, traffic,

cars or buildings nor allow anyone near the

machine while in operation. Thrown objects can

pass through glass windows and some walls of

WARNING

buildings. There is extreme risk of danger from

thrown objects or being cut by the blades of the

mower or being run over if you lose control.

Never operate the mower in an enclosed area

without good, approved ventilation. Exhaust

fumes are dangerous.

Initial Operating Safety Guidelines:

Read and understand the warning on the

instrument panel of the mower.

Keep a firm hold on the stationary handle at

all times.

Keep both feet on foot platform at all times.

Know the controls and how to stop quickly.

Before attempting to start the engine, follow

all starting instructions.

Look behind before backing up.

Before leaving the operator’s position for

momentary reasons, turn off the blade

clutch engagement switch, apply the

parking brake. Keep others from coming

near the mower. Get back on the mower

as soon as possible.

When leaving the Wright mower unattended,

turn off the blade clutch engagement

switch, apply the parking brake, stop the

engine and remove the key. Never leave

the machine unattended on a slope in

case someone disengages the parking

brake which would be hazardous if the

mower were to roll.

When transporting, driving onto transport

vehicles, into buildings, across parking

lots or otherwise not mowing grass, turn

off the blade clutch engagement switch to

reduce risk of thrown objects and rotating

blade hazard. After coming to a stop

apply the parking brake, stop the engine

and remove the key.

Before performing any maintenance, repair

service, mowing height or other adjust-

ments, disengage power to blades, apply

the parking brake, stop the engine,

remove ignition key and spark plug wire

from spark plug(s).

DO NOT allow inexperienced people to

operate the mower until they have read

and understood these safety instructions.

page 3

WARNING

Operate the mower at slower speeds

while becoming familiar with it.

Speeding is dangerous for even an experi-

enced operator. Sudden stops from

excessive speed may cause serious

injury.

The discharge chute deflector must be in-

stalled at all times and in the down posi-

tion except that it may be raised when

the grass catcher is completely installed.

If the mower discharge clogs, turn off the

blade clutch switch, apply the parking

brakes, stop the engine and remove the

key before removing obstruction.

Keep all shields and covers in place, espe-

cially grass discharge chute deflector, the

blade belt cover, and the pump belt/pulley

cover over the operator’s toe area.

Keep hands, feet and clothing away from

rotating parts, especially the rear wheels,

blades, engine flywheel, belts and pul-

leys.

Do not touch engine or muffler while engine is

running or soon after it is stopped. These

areas can be so hot as to cause severe

burns.

Clean grass, leaves and lubricant spills from

surfaces after use to prevent fire hazard.

Be alert for traffic when crossing roads or

operating near roadways.

Before crossing gravel drives, sidewalks or

roads, turn off the blades and wait for

them to stop.

Operation on Slopes:

DO NOT operate on steep slopes. Do not

operate the mower on slopes steeper than you

can feel secure about the traction of the tires

and the stability of the mower. Do not operate

the mower on slopes at all when the grass is

wet. There is a danger of suddenly sliding

sideways or down the hill. On moderate hills

reduce speed and use caution. When operating

on a slope, travel across the grade, whenever

possible, not an up or down pattern. Reduce

speed and exercise extreme caution on slopes

and in sharp turns to prevent tipping or loss of

control. Be especially cautious when changing

direction on slopes.

The Wright Stander is capable of greater trac-

tion on slopes than typical riding mowers be-

cause of the benefits of a lower center of grav-

ity. It is essential for you to know more about

the handling characteristics of the mower so that

you can enjoy more efficient mowing techniques

and for increasing your safety.

The Wright Stander mower handles differently at

different angles of attack on a slope. It is impor-

tant to understand the following differences so

that you can use or avoid using the mower at

different angles for the best advantage. Be

aware that if you do a turn on a slope you may

go through all of the following orientations to a

slope and must handle the mower accordingly.

As you use the mower you will gain the tech-

nique to mow more lawn than ever before.

When pointing up a slope, the Stander has the

most weight on the drive wheels and therefore

the most traction at the tires. However, this is

the angle that it has the most tendency to tip

back (“pop a wheely”). This is the preferred

angle for mowing small areas of steeper slopes.

Recommendations for this angle:

Lean as far forward as possible to add your

weight to the front of the mower.

Do not accelerate quickly to avoid "popping a

wheely”. Accelerate gently.

If backing down the hill do not stop suddenly,

but slow down gradually.

When pointing down a slope, the Stander has

the least weight on the drive wheels and there-

fore the least traction at the tires. This is the

angle that the mower has the most tendency to

slide. However, this is the angle that it has the

least tendency to tip back. Avoid this angle, as it

has the least advantage for the Stander.

Recommendations for this angle:

Stretch your arms out straight while holding

onto the handles and duck or squat

slightly (6"-12") so that your rear end

hangs out the back. This adds more of

your body weight to the drive wheels for

more traction.

Do not change speed suddenly to minimize

page 4

the tendency of going into a slide. Acceler-

ate and slow down gently. If you ever go

into an uncontrolled slide while pointing

down a slope the recommended proce-

dure is to let go of the handles and jump

off if necessary. Otherwise, control the

mower gently and stay off slopes that tend

to make the wheels slide at this orienta-

tion.

When crossing a slope sideways, the Stander

has the average amount of weight on the drive

wheels versus the front wheels, similar to level

ground. However, this angle leaves the least

weight on the higher side drive wheel, tending to

make it slip. This is the preferred angle for

mowing large areas of gentle slopes.

Recommendations for this angle:

Stand straight, as far as forward and back-

ward are concerned, but lean sideways,

toward the uphill side and stand on the

uphill side of the foot platform. This adds

weight to the higher side drive wheel and

will allow you to mow more quickly

across the slope without sliding.

Do not accelerate quickly to minimize the

tendency of "popping a wheely”. Acceler-

ate gently.

Note: Excessively worn tire tread is dangerous.

Replace tire(s) with less than 3/32" of any tread

groove left. Use tires with the tread pattern

recommended by Wright Mfg., Inc. only. Keep

the tire pressure in the drive tires between 8 and

12 psi. Higher pressures will cause the tires to

have less traction which will force you to go

slower and with less safety.

Replacement Parts:

Use of parts other than specified parts supplied

by Wright Manufacturing, Inc. may compromise

the safe use of the mower and are not recom-

mended.

WARNING

Operation in Reverse:

Always keep a firm grip on the mower handles

with both hands. Keep both feet firmly on the

foot platform. Operate the mower very slowly,

inching it backward until you become familiar

with how the mower operates and always if in

an awkward location or position. Never place

your foot or feet on the ground near the back

edge of the mower while backing up to prevent

serious injury to feet or legs if mower were to

run over you. Look behind you before backing to

prevent injuring yourself or anyone behind you.

Operation in Forward Direction:

Always keep a firm grip on the mower handles

with both hands. Operate the mower slowly until

you become familiar with how the mower

handles. Do not operate the mower faster than

conditions allow. For example hills, wet or

bumpy ground, dim light or high grass would all

be conditions where you should work slower

than normal. Never operate the mower at the

highest speed unless you are on level, wide,

open areas of clearly visible ground or trans-

porting on paved areas. Speeding with any

mower is dangerous, and so is traveling faster

than conditions should permit on this mower.

Sudden stops from excessive speed or falling

off the mower may cause serious injury or

death.

Operation During Zero-Radius Turns:

During zero-radius turns (when one mower

wheel rotates backwards while the other is

moving forward) drive extra slowly to reduce the

possibility of losing traction or control, or be-

coming dizzy. This will help prevent you from

being thrown off of the mower. Be aware that if

you do a turn on a slope you may go through all of

the orientations to a slope mentioned above and

must handle the mower accordingly.

WARNING

page 5

WARNING

Fuel Safety:

Handle gasoline with care - it is highly flam-

mable. Do not smoke while handling gasoline.

Use an approved gasoline container. Never

remove the fuel cap or add gasoline to a running

or hot engine or an engine that has not been

allowed to cool for several minutes after running.

Never fill the tank indoors and always clean up

spilled gas. NEVER store the equipment with

gasoline in the tank inside a building where

fumes may reach an open flame or spark. Allow

the engine to cool before storing in any enclo-

sure.

Hydraulic Safety:

Keep body and hands away from pin holes or

fittings that eject hydraulic fluid under high pres-

sure. Use paper or cardboard and not hands to

search for leaks.

Hydraulic fluid escaping under high pressure

may have sufficient force to penetrate skin and

cause serious injury. If foreign fluid is injected

into the skin, it must be surgically removed

within a few hours by a doctor familiar with this

form of injury or gangrene may result. Seek

medical attention immediately. Make sure all

hydraulic fluid connections are tight and all

hydraulic hoses and lines are in good condition

before starting the Wright mower. Hydraulic fluid

is under high pressure. If you need service on

your hydraulic system, please see your autho-

rized Wright dealer.

We really want you to be as safe as pos-

sible. Please read the above again and again

until you fully understand the methods to

promote the safest operation possible.

REMEMBER - YOUR MOWER CAN BE ONLY

AS SAFE AS THE OPERATOR.

FAILURE TO FOLLOW SAFE OPERATING

PRACTICES MAY RESULT IN

SERIOUS INJURY OR DEATH.

WARNING

If you are not completely familiar with the Safety Instruction

Manual read it now before proceeding with the Pre-Delivery

Service of the mower. Only your authorized Wright Stander

dealer should perform the Pre-Delivery Service of the mower.

page 6

WARNING

The Wright Stander is shipped completely as-

sembled and has been adjusted and tested at the

factory. However, due to the jostling of the ship-

ping process and the amount of time elapsed

since this was done at the factory until you re-

ceived the machine the following items need to

be repeated again before starting the mower.

After you have un-crated the mower follow these

procedures in the order indicated:

Remove spark plug wire from spark plug(s)

Inspect the mower for any damage, unusual

conditions or missing parts.

Inspect the mower for all of its decals, espe-

cially the warning decals. There should be

one blade warning decal on each side of

the deck, the “shield missing” under the

blade belt cover, the dash decal, the

“shield missing” decal behind the pump

pulley and belt guard over the operator’s

toe area.

Check (and fill if necessary) engine oil level

according to the engine manufacturer’s

recommendation.

Check (and fill if necessary) hydraulic fluid

level. The level should be about 3"-4"

below the top of the oil fill. Use synthetic

oil: Mobil 1 10W-30 or AmsOil 10W-40.

Check rear tire pressure. 8 to 12 psi. is

recommended. It should be even on both

sides. Use the higher pressures for heavier

operators. Set the tire pressure in the front

caster tires between 35 and 46 psi. Higher

pressures will help keep the caster tires on

their rims when impacted from the side but

give a harder ride.

Remove the blade belt cover and check (and

tighten if necessary) all belt tensions ac-

cording to specifications further in this

manual. DO NOT OVERTIGHTEN.

Rotate the blade pulleys slightly to see if they

rotate freely and all turn together.

Lubricate all moving parts (see Maintenance

Items section of this manual).

Replace the blade belt cover.

Remove battery (if electric start version) from

machine and fully charge in an open, well

ventilated area according to the recommen-

dations of the battery charger manual. The

battery is 12 volts. After fully charged, install

on mower and attach battery cables, posi-

tive first (from starter motor) and negative

last (from ground).

Fill fuel tank with regular unleaded gasoline.

Open fuel valve under gas tank.

DO NOT START THE ENGINE AT THIS

TIME. FOLLOW THE NEXT PROCEDURE

BEFORE STARTING. The hydraulic sys-

tem MUST be checked for proper opera-

tion before allowing wheels to operate on

the ground.

Set the rear of the machine on jack stands or

blocks to raise rear wheels off of the

ground two or three inches and check that

the mower will not fall off the supports you

devise. (Do not support the mower's

weight on any part of the foot platform).

You must be able to stand on the mower.

The stand(s) must be able to secure the

mower from rolling off or away during the

next procedures. Check under the mower

deck for any debris or unusual conditions.

With hand controls in the middle or neutral

position, apply the parking brake.

Open the manual valves on top of each motor

a half-of-a-turn counterclockwise.

Reattach spark plug wires to spark plugs.

Before starting the engine be ready to stop it

if the wheels begin to turn with the brake

on. (If this happens, check that the manual

valves on top of each motor are open at

least a half-of-a-turn counterclockwise.)

Start the engine according to the engine

manufacturer’s recommendation. Let the

engine run at low RPM for several minutes

to get the hydraulic fluid circulating through

the pumps, etc. While standing on the foot

platform, release the parking brake. Now

Pre-Delivery Service of Mower by Dealer

page 7

gradually close the manual valves on top of

each pump one at a time and see if the

wheels start to move. If the wheels move

when the hand controls are in the neutral

position, adjust the neutral adjustment

knobs at the back of the mower between

the two hydraulic pumps until they stop.

The manual valves on top of each pump

should now be firmly closed. Now try

moving the hand control levers, one at a

time, forward and backward. Check to see

if the wheels move forward and backward

according to position of the levers. If not,

service the hand control system. If the

wheels stop when the hand controls are in

the neutral position the parking brake

should now be applied. Now check if the

parking brake interlock prevents you from

moving both of the hand control levers from

the neutral position. If not, service the

parking brake interlock.

Before testing the blade clutch/brake opera-

tion make sure the area is clear and there

is nothing vulnerable to possible thrown

objects from under the mower. No one

should be near the mower deck or in its

line of discharge at this time. The dis-

charge chute deflector should be in the

down position. The parking brake should

now be applied. Move the engine throttle

control to its highest RPM speed setting.

Stand on the foot platform and turn on the

blade clutch switch. Run blades for a

minute or so. Try engaging and disengag-

ing the blades a few times about 10 sec-

onds apart. If the blades do not start and

stop in a few seconds each time, service

the blade brake system. With the blades

on, now try stepping off the foot platform

to test the Operator Presence Control

switch (OPC). The engine should die and

the blades should stop in several seconds.

If not, service the OPC system. Try this a

couple of times.

Disengage the blades, set the parking brake

and shut off the engine and remove the

mower from the stand(s).

Drive the mower around on a level parking lot.

It is recommended that the slower setting of

the Speed/Sensitivity Adjustment be used.

(See further in this manual for information on

Speed/Sensitivity Adjustment.) Check that

the mower drives in a straight line when both

hand controls are held to the full speed

position which is up against the stationary

control bar. If not, see further in this manual

for information on tracking adjustment.

As you drive the mower listen for any unusual

noises and test for irregular operation and

adjust or service as necessary. Next, go

over the safety information and operating

procedures in this manual with the cus-

tomer. Instruct the customer in proper op-

eration and observe the customer during

their initial operation on a level parking lot.

Make sure the customer is familiar and

comfortable with the basic operation and

use of the mower.

Dealer: Please fill out and follow the instruc-

tions on the Product Registration Form and

have the customer fill out his part of the

form. After the Product Registration Card is

filled out and signed by the customer and a

representative from your dealership, please

send or fax it immediately to your Wright

Commercial Products Distributor according

to the directions on the Card. Then give the

customer his copy of the registration form

and then keep your copy and mail the

remaining copies of the form to your Wright

Commercial Products Distributor. The

limited warranty is not valid unless the

mower is registered and all of the above

steps are taken. Remember, the purchaser

is both your and our customer and his

satisfaction is very important. Thank you for

supporting our products.

The mower is now ready for delivery to your

customer.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Wright Manufacturing Tondeuse à gazon

Wright Manufacturing

Wright Manufacturing Stander RH 52083 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Sentar Sport Lawn Mower Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander ZK Series Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander ZK 43181 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander 48 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander X 54956 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander 54700 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander RH 28551 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Sentar 26980 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander Lawn Mower Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Wright Midmount Z Manuel utilisateur

Wright Manufacturing

Wright Manufacturing ZTO series Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Sentar 31423 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Sentar Sport 26077 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing B) Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Sport X 14SH654 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Stander ZK 55138 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Rapid-Hite Mower Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Wright Z 31897 Manuel utilisateur

Wright Manufacturing

Wright Manufacturing VKX2-3(R,SC,B Mode d’emploi

Wright Manufacturing

Wright Manufacturing Stander T Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Sentar Manuel utilisateur

Wright Manufacturing

Wright Manufacturing Sentar Commercial Mower Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur