WPG MT410TAC Manuel utilisateur

Rev 32.0/11-23 MT-10TAC: #350891

MANUAL TILTER,

AC-VOLTAGE

Model numbers: MT410TAC, MT610TAC,

MT810TAC (shown), MT1010TAC

908 W. Main • P.O. Box 368

Laurel, MT USA 59044

800-548-7341

406-628-8231

www.WPG.com

Original Instructions © Wood’s Powr-Grip Co., Inc.

READ AND UNDERSTAND BEFORE

OPERATING THIS EQUIPMENT

OPERATING

INSTRUCTIONS

INTENDED FOR USE BY PROFESSIONAL EQUIPMENT OPERATORS

APPLICABLE TO SERIAL NUMBERS 20220001

AND LATER. FOR EARLIER NUMBERS,

SEARCH WPG’S ARCHIVE.

MT-10TAC: #35089 Rev 32.0/11-232

Rev 32.0/11-23 MT-10TAC: #350891

SPECIFICATIONS .....................................................................................3

SAFETY...................................................................................................5

OPERATING FEATURES............................................................................6

ASSEMBLY..............................................................................................7

INTENDED USE .......................................................................................9

LOAD CHARACTERISTICS.................................................................................9

INDIRECT LOADING .....................................................................................10

OPERATING ENVIRONMENT..........................................................................10

DISPOSAL OF THE LIFTER .............................................................................10

OPERATION..........................................................................................11

BEFORE USING THE LIFTER...........................................................................11

Taking Safety Precautions .................................................................................................11

Performing Inspections and Tests .....................................................................................11

TOUSE THE PAD SHUTOFFS .........................................................................12

TOATTACH THE PADS TO ALOAD ..................................................................13

Generating Airflow............................................................................................................13

Positioning the Lifter on the Load.....................................................................................13

Sealing the Pads on the Load............................................................................................14

Reading the Vacuum Gauge..............................................................................................14

TOLIFT AND MOVE THE LOAD......................................................................15

Interpreting the Vacuum Gauge .......................................................................................15

Monitoring the Vacuum Gauge.........................................................................................15

Controlling the Lifter and Load .........................................................................................15

In Case of a Power Failure.................................................................................................16

TOTILT THE LOAD ......................................................................................17

TOLAND THE LOAD ....................................................................................17

TORELEASE THE PADS FROM THE LOAD .........................................................18

AFTER USING THE LIFTER.............................................................................18

Storing the Lifter ...............................................................................................................19

Transporting the Lifter ......................................................................................................19

INSPECTIONS AND TESTS......................................................................20

INSPECTION SCHEDULE ................................................................................20

TABLE OF CONTENTS

MT-10TAC: #35089 Rev 32.0/11-232

TESTING ...................................................................................................21

Lifter/Load Compatibility Test...........................................................................................21

Operational Tests ..............................................................................................................22

Vacuum Test......................................................................................................................22

Rated Load Test.................................................................................................................23

MAINTENANCE ....................................................................................24

VACUUM PAD MAINTENANCE.......................................................................24

Pad-to-Load Friction Coefficient .......................................................................................24

Pad Inspection ..................................................................................................................24

Pad Cleaning .....................................................................................................................25

TOREPLACE SEALING RING IN VPFS10T PADS ...............................................26

REPLACEMENT PARTS...........................................................................27

REGISTRATION AND LIMITED WARRANTY ............................................28

TOREGISTER THIS WPG PRODUCT ...............................................................28

ABOUT THE LIMITED WARRANTY ..................................................................28

Obtaining Warranty Service or Repair Service..................................................................28

TABLE OF CONTENTS

Product

Description

Designed for use with hoisting equipment, MT-10TAC lifters support loads using vacuum and

manipulate loads using manual 90° tilt motions.

Model

Number

MT410TAC

(4 vacuum pads)

MT610TAC

(6 vacuum pads)

MT810TAC

(8 vacuum pads)

M1010TAC

(10 vacuum pads)

Maximum

Pad Spread

(to outer edges)

11¾" x 53¾"

[30 cm x 137 cm]

11¾" x 77¾"

[30 cm x 197 cm]

21¼" x 77¾"

[54 cm x 197 cm]

33¼" x 77¾"

[85 cm x 197 cm]

Maximum Load

Capacity1

1...... The Maximum Load Capacity is rated at a vacuum of 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces with a friction coefficient of 1. Pad

compound, load rigidity, strength, surface conditions, overhang, angle, center of gravity and temperature can also affect the lifting capacity. A “qualified

person” should evaluate the effective lifting capacity for each use (see definition under “Rated Load Test”).

Per pad:150 lbs [68 kg]

Total: 600 lbs [270 kg]

Per pad:150 lbs [68 kg]

Total: 900 lbs [270 kg]

Per pad:150 lbs [68 kg]

Total: 1200 lbs [270 kg]

Per pad:150 lbs [68 kg]

Total: 1500 lbs [270 kg]

Lifter

Weight 90 lbs [41 kg] 105 lbs [48 kg] 115 lbs [53 kg] 130 lbs [59 kg]

Vacuum Pump

Assembly Weight 40 lbs [19 kg]

Vacuum Pads

(standard rubber2

2...... Available with other rubber compounds for special purposes (see www.wpg.com).

)

10" [25 cm] nominal diameter with replaceable sealing rings for rough or textured surfaces (Model

VPFS10T).

Power

Source See serial number plate for specific AC voltage, frequency and amperage.

Tilt

Capability Manual, 90°

Product

Options

Available with Center Spool Lift Bar.

Available with Frame-Mounted AC Power System.

See separate instructions about other options.

Operating

Elevation Up to 6,000' [1,828 m]

Operating

Temperatures 32° — 104° F [0° — 40° C]

Service Life 20,000 lifting cycles, when used and maintained as intended3

3...... Vacuum pads, filter elements and other wear-out items are excluded.

ASME Standard

BTH-1 Design Category "B", Service Class "0"

Troubleshooting

Guide TST-016_GENERIC_LEAK_TEST_rev_2014-086

Rev 32.0/11-23 MT-10TAC: #350893

SPECIFICATIONS

MT-10TAC: #35089 Rev 32.0/11-234

Note: Standard MT-10T vacuum lifters are shown.

SPECIFICATIONS

Rev 32.0/11-23 MT-10TAC: #350895

SAFETY

Wear personal protective equipment

that is appropriate for the load

material. Follow trade association

guidelines.

Do not remove or obscure safety

labels.

Do not make any modifications to the

lifter (see “LIMITED WARRANTY”).

Use the lifter only in an approved

“OPERATING ENVIRONMENT” (see

“INTENDED USE”).

Make sure to consider all possible

effects of “INDIRECT LOADING” on lifting

capacity (see “INTENDED USE”).

Do not use a lifter that is damaged,

malfunctioning, or missing parts.

Do not use a lifter if the sealing edge

of any vacuum pad is cut or otherwise

damaged.

Do not use a lifter to lift cracked or

broken glass.

Do not exceed the Maximum

Load Capacity or lift loads the

lifter is not designed for (see

“INTENDED USE”).

Do not use a lifter if the

Maximum Load Capacity or any

safety label appears to be

missing or obscured.

Make sure the contact surfaces of the

load and vacuum pads are clean

before attaching the lifter (see

“MAINTENANCE”).

Position the vacuum pads correctly on

the load before lifting (see

“OPERATION”).

Do not lift a load if any vacuum

indicator shows inadequate vacuum.

Keep unauthorized personnel away

from the lifter, to avoid injury in case

of an unintended load release.

Do not touch the vacuum release

controls during a lift.

Do not allow people to ride on the

lifter or the load.

Do not lift a load higher than

necessary or leave suspended loads

unattended.

Do not position a loaded or unloaded

lifter over people.

Before servicing a powered lifter, place

the power control in the inactive

position and, when possible,

disconnect the power source.

MT-10TAC: #35089 Rev 32.0/11-236

Features shown here are underlined on their first appearance in each section following.

1 LIFT SLING 2 VACUUM PAD

3PADFRAME 4PADSHUTOFF

5POWERSWITCH 6 VACUUM CONTROL VALVE

7 VACUUM GAUGE 8CONTROLHANDLES

9AIRFILTERS 10 VACUUM PUMP ASSEMBLY

Note: A standard MT810TAC is shown. Although some of the following photos do not show this

specific lifter, they all illustrate how this kind of lifter functions.

For information about specific parts, see “REPLACEMENT PARTS” and/or any separate

instructions for Product Options.

OPERATING FEATURES

Rev 32.0/11-23 MT-10TAC: #350897

ASSEMBLY

1) Remove all shipping materials and save them with the shipping container for future use.

2) Suspend the lifter from appropriate hoisting equipment:

2.1)

Select a crane and/or hoist rated for the Maximum Load Capacity plus the

Lifter Weight.

Note: Any lifter use must comply with all statutory or regulatory standards for

hoisting equipment in your region.

2.2)

Make sure the lift slings

are securely attached to

the lifter (circled in fig.

2A).

2.3)

Make

sure

hook has

restraining

latch (circled

right).

Attach the free eye of

each lift sling to the

hoisting equipment

hook (fig. 2B).1

Only use clevis and clevis pin rated for

Maximum Load Capacity plus Lifter Weight.

Note: A large clevis makes it

easier to connect or

disconnect the lift slings.

2.4) Use the hoisting equipment to remove the lifter from

the shipping container. Avoid damaging the vacuum

pads.

Remove the pad covers (fig. 2C) and save them

for future use.

1..... If the lifter has a Center Spool Lift Bar, disregard the directions about lift slings. Instead, attach the hoisting equipment hook directly to the lift

spool. All other directions and warnings still apply.

MT-10TAC: #35089 Rev 32.0/11-238

3) Attach the vacuum pump assembly securely to the hoisting equipment in a protected

location where the vacuum package will move with the lifter and will not interfere with

hoisting equipment (see arrows in fig. 3A for two potential mounting locations).1, 2

Make sure power source has ground fault circuit

interrupter.

Connect the power cable:

4.1)

Wiring must be done by qualified

service personnel, taking all

appropriate safety precautions.

Wire the female connector provided

to an appropriate power source, as

indicated on the label attached.

4.2) Route the power cable so that it does not become damaged during operation.

4.3)

4A 4B

Insert the power cable’s

male connector into the

female connector and twist

to secure them together

(figs. 4A-B).

5) Perform tests as required under “TESTING”.

1..... For lifters equipped with the Frame-Mounted AC Power System, disregard the directions about mounting the vacuum pump assembly on the

hoisting equipment.

2..... Consult the hoisting equipment manufacturer to determine how to mount the vacuum pump assembly in a safe location that will not interfere

with hoisting equipment operation.

ASSEMBLY

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WPG Système de levage

WPG

WPG MRTALPCH611LDC3 Manuel utilisateur

WPG

WPG N4950AIR Manuel utilisateur

WPG

WPG P110C04DC Manuel utilisateur

WPG

WPG MTCL8FS10TDC Manuel utilisateur

WPG

WPG FLEXR Series Manuel utilisateur

WPG

WPG FLEX Series Manuel utilisateur

WPG

WPG MRT411LDC Manuel utilisateur

WPG

WPG MRTALP4625DC3 Manuel utilisateur

WPG

WPG FL1HV11DC Manuel utilisateur

WPG

WPG MR1611LDC Manuel utilisateur

WPG

WPG LJ6VH Manuel utilisateur

WPG

WPG MTA29AC Manuel utilisateur

WPG

WPG MRT4 Series Manuel utilisateur

WPG

WPG PT410AC Manuel utilisateur

WPG

WPG MT1010TDC Manuel utilisateur

WPG

WPG MRTALP Series Manuel utilisateur

WPG

WPG MRTALPCH611LDC Guide de référence

WPG

WPG MRT411LDC3 Manuel utilisateur

WPG

WPG FLEXR Series Manuel utilisateur

WPG

WPG MRPT1211LAC Manuel utilisateur

WPG

WPG QUADRA-TILT MRTA811LDC3 Manuel utilisateur

WPG

WPG N6292 Manuel utilisateur

WPG

WPG MT410TAIR Manuel utilisateur

WPG

WPG P1HV1102DC3 Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur