Woxcon LR-DA14 KIT Manuel utilisateur
LR-DA14 KIT
1x4 Splitter with 150m Extension
All Rights Reserved
Version: LR-DA14 KIT_2017V1.0
User Manual
1x4 Splitter with 150m Extension
Preface
Read this user manual carefully before using the product. Pictures are shown in this
manual for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. In the constant effort to improve the product, we reserve the
right to make functions or parameters changes without notice or obligation. Please refer
to the dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
1x4 Splitter with 150m Extension
SAFETY PRECAUTIONS
To ensur e t h e b e s t per f o r m a n c e f r om t h e p r o d u c t , pl e a s e r e a d all i n s t ruct i o n s c a r eful l y
before using the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prev e n t f i re o r s h o c k hazard, do not expose the unit to rain, moisture or install
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
1x4 Splitter with 150m Extension
4
Contents
1. Introduction .................................................................................................................. 1
1.1 Introduction to LR-DA14 KIT .............................................................................. 1
1.2 Features ............................................................................................................. 1
1.3 Package List ....................................................................................................... 2
2. Specification ................................................................................................................ 3
2.1 HDBaseT Splitter ................................................................................................ 3
2.2 HDBaseT Receiver ............................................................................................. 4
3. Panel Description ........................................................................................................ 5
3.1 HDBaseT Splitter Front Panel ............................................................................ 5
3.2 HDBaseT Splitter Rear Panel ............................................................................. 6
3.3 HDBaseT Receiver ............................................................................................. 7
4. System Connection ..................................................................................................... 8
4.1 Usage Precautions ............................................................................................. 8
4.2 System Diagram ................................................................................................. 8
5. RS232 Control ............................................................................................................. 9
5.1 RS232 Control Software ..................................................................................... 9
5.2 RS232 Command ............................................................................................. 11
6. IR Control ................................................................................................................... 12
6.1 Controlling the Display Device ......................................................................... 12
6.2 Controlling the Source Device .......................................................................... 13
7. EDID Management .................................................................................................... 14
8. Panel Drawing ........................................................................................................... 17
9. Troubleshooting & Maintenance ................................................................................ 18
10. Customer Service .................................................................................................... 19
1x4 Splitter with 150m Extension
1
1. Introduction
1.1 Introduction to LR-DA14 KIT
Thanks very much for purchasing the 1 x 4 HDBaseT Splitter KIT. This device accepts
a single HDMI input and splits into four HDBaseT outputs and one HDMI output.
It supports video resolutions up to 1080p@60Hz and all HDMI audio formats. It can
extend 1080p signals on each HDBaseT output to up to 492 feet (150 meters) over a
single CATx Ethernet cable. It also supports the Power over Cable (PoC) feature, which
allows the included HDBaseT receivers to be powered from the splitter over Ethernet
cables. Moreover, it supports bidirectional IR and RS232 control.
1.2 Features
l Splits a single HDMI input to four HDBaseT outputs.
l Supports video resolutions up to 1080p@60Hz.
l Extends 1080p signals on each output to distances up to 492 feet (150 meters) over
a single CATx Ethernet cable.
l Supports the Power over Cable (PoC) feature, allowing the HDBaseT receivers to
be powered by the splitter over the Ethernet cables.
l Supports bidirectional IR control for flexibility control.
l Smart EDID management. Selects the output resolution to match the connected
displays by 4-pin DIP switch.
l Fully compliant with the HDMI 1.4 and HDCP 2.2 specification.
1x4 Splitter with 150m Extension
2
1.3 Package List
HDBaseT Splitter
l 1 x LR-DA14 HDBaseT Splitter
l 2 x Mounting Ears with 4 Screws
l 2 x Long Mounting Ears
l 4 x Plastic Cushions
l 1 x IR Receiver (5V with carrier wave)
l 4 x IR Emitters
l 1 x RS232 Cable (3-pin to DB9)
l 1 x Power Adaptor (24VDC 2.71A)
HDBaseT Receiver
l 4 x LR-EX1R HDBaseT Receivers
l 8 x Mounting Ears with 8 Screws
l 16 x Plastic Cushions
l 4 x 3-pin Phoenix Connectors
l 1 x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
1x4 Splitter with 150m Extension
3
2. Specification
2.1 HDBaseT Splitter
Video Input
Input
(1) HDMI
Input Connector
(1) Female type A HDMI
Input Video Signal
HDMI
HDMI Input Resolution
Up to 4Kx2K@30Hz
Video Output
Output
(1) HDMI; (4) HDBT
Output Connector
(1) Female type A HDMI; (4) RJ45
Output Video Signal
HDMI, HDBaseT
HDMI Output Resolution
Up to 4Kx2K@30Hz
HDBT Output Resolution
Up to 1080p@60Hz
Control
Control port
(1) EDID; (1) EDID PRESET; (1) IR ALL IN; (1) IR ALL
OUT; (1) REMOTE; (1) MASTER
Control Connector
(1) 3-pin DIP switch; (1) 4-pin DIP switch; (2) 3.5mm
mini jacks; (2) 3-pin phoenix connectors
General
Transmission Mode
HDBaseT
Transmission Distance
1080p ≤492 feet (150 meters)
Operation Temperature
0 ~ +40℃
Storage Temperature
-10 ~ +55℃
Relative Humidity
10% ~ 90%
AC Adapter Input Power
100V~240V AC, 50/60Hz
Input Power
24VDC 2.71A
Power Consumption
35W (Max)
Dimension (W*H*D)
219mm x 44mm x 157.5mm
Net Weight
1.24kg
1x4 Splitter with 150m Extension
4
2.2 HDBaseT Receiver
Input
Input Signal
(1) HDBT
Input Connector
(1) RJ45
Output
Output
(1) HDMI
Output Connector
(1) Female type A HDMI
Control
Control port
(1) IR IN; (1) IR OUT; (1) RS232
Control Connector
(2) 3.5mm mini jacks; (1) 3-pin phoenix connector
General
Resolution Range
Up to 1080p@60Hz
Transmission Mode
HDBaseT
Transmission Distance
1080p ≤ 492 feet (150 meters)
Bandwidth
10.2Gbps
HDMI Standard
Support HDMI1.4 and HDCP2.2
Impedance
75Ω
Operation Temperature
0 ~ +40℃
Storage Temperature
-10 ~ +55℃
Relative Humidity
10% ~ 90%
AC Adapter Input Power
100V~240V AC, 50/60Hz
Input Power
12VDC 1A
Power Consumption
9.5W (Max)
Dimension (W*H*D)
84mm x 16mm x 104mm
Net Weight
140g
Note: Please adopt quality CAT Ethernet cable compliant with CAT6e or higher
standard for reliable transmission.
1x4 Splitter with 150m Extension
5
3. Panel Description
3.1 HDBaseT Splitter Front Panel
No.
Name
Description
①
Power LED
The LED illuminates red when power is applied.
②
Input LED
The LED illuminates green when there is HDMI source
input.
③
HDMI output LED
The LED illuminates green when there is HDMI output.
④
HDBT output LEDs
Four LEDs, one of which illuminates green to indicate
the display device outputting HDBaseT signal.
⑤
EDID
3-pin DIP switch for setting the Extended Display
Identification Data (EDID) value.
12345
1x4 Splitter with 150m Extension
6
3.2 HDBaseT Splitter Rear Panel
No.
Name
Description
①
HDMI IN
HDMI port for connecting the HDMI source device
(Blu-ray Disc™, DVD player, gaming console, etc.).
②
HDMI OUT
Local HDMI port for connecting a local display.
③
HDBT OUTPUTs
Four HDBaseT RJ45 outputs for connecting the four
HDBaseT receivers.
④
IR ALL IN
3.5mm jack for connecting the IR receiver.
⑤
IR ALL OUT
3.5mm jack for connecting the IR emitter.
⑥
EDID PRESET
4-pin DIP switch for setting manual EDID
management.
⑦
REMOTE
3-pin phoenix connector for connecting to a computer
for RS232 pass through control.
⑧
MASTER
3-pin phoenix connector for connecting to a computer
for controlling this splitter via RS232 commands.
⑨
GROUND
Ground connection.
⑩
DC 24V
DC barrel connector for the AC power adapter.
12310
456789
Table des matières
Autres manuels Woxcon Convertisseur de média
