9
Lithium-Ion cordless drill/driver EN
ADDITIONAL SAFETY
RULES FOR YOUR
CORDLESS DRILL
1. Remove the battery pack from the drill
before carrying out adjustments.
2. Do not expose to rain or water.
3. Do not store the battery pack in
temperatures over 40oC.
4. Always charge the battery pack between
temperatures 0oC to 30oC. Ideal charging
temperature is 18oC to 24oC.
5. Only use the charger and the battery pack
provided no others.
6. Avoid short circuit of the battery pack
connections (screws & nails).
7. Do not incinerate or burn the battery pack,
it may explode.
8. Do not charge a damaged battery pack.
9. Replace any damaged supply cords on
your charger.
10.Always disconnect the charger power
supply before making or breaking the
connections to the battery pack.
11. Battery pack and charger will be warm
during charging this is normal.
12.When not in use, remove a charged battery
pack from the charger.
13.Always remove the battery pack from the
charger immediately after re-charging is
completed.
14.Your drill and battery pack will be warm
when working, this is normal.
15.Do not dispose of batteries in fire, or
with household waste. Return exhausted
batteries to your local collection or
recycling point.
16.Always check walls, floors and ceilings for
hidden power cables and pipes.
1 7. Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury.
18.Accessories and metal parts can become
very hot.
19.Hold power tool by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring. Cutting
accessory contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
WARNING: If a small amount
of electrolyte should leak from
the battery pack under extremes of
temperature or after heavy use, then
wash off immediately from your skin and
hands using clean water. For eye contact,
rinse thoroughly with clean water and seek
medical treatment immediately.
