WorldSim Tri-Fi Manuel utilisateur
WorldSIM Products
Travel SIM Card
For Free International
Roaming
Orbizz
Dual SIM Android
Smart Phone
For more information please visit www.worldsim.com
Travel Genie
Dual SIM
World Phone
Thank you for purchasing the ‘WorldSIM Tri-Fi’
Features:
Prompt:
• Power bank, High capacity battery up to 5200 mAh.
• Supports 3G to WiFi.
• Supports wired network to WiFi.
• Supports DHCP (Auto Cong) and PPPoE (ADSL).
• Supports wireless network to WiFi.
• Supports 3G to LAN.
• Micro SD card support up to 32GB (SD card not included).
• The default setting of the Tri-Fi is Power Bank state . At this point the CPU does not work in order to save power. At
any other state the Tri-Fi can also charge other devices.
• As soon as the Network Cable is inserted, the Tri-Fi will automatically switch to the LAN state for saving 3G trafc.
• If you only use the Power Bank function of the Tri-Fi, you should select the Power Bank Indicator Light using the
select button.
01
Introduction of Tri-Fi:
01. Micro SD Card Indicator Light
02. LAN Indicator Light
03. 3G Indicator Light
04. Power Bank Indicator Light
05. Battery Indicator Light
06. Product description
07. Select Button & Data Indicator Light
08. LAN/WAN Port
09. Micro SD Card Slot
10. SIM Card Slot
11. Power Switch
12. Reset
13. USB Port (for power supply to other devices)
14. Micro-USB Charging Port
15. Charge Indicator Light
02
Device State:
Please note: The state of SD card, LAN , 3G and Power Bank is switched by pressing the Select Button.
Indicator Light
Power Bank
Indicator Light
Battery Indicator
Light
Charge Indicator
Light
Data Indicator Light
LAN Indicator Light
3G Indicator Light
Micro SD Card
Indicator Light • Indicator light is always blue when switched to the state of SD card.
• Indicator light is always blue when switched to the state of LAN.
• Indicator light is always blue when switched to the state of 3G.
• Indicator light is always blue when switched to the state of Power Bank.
• Indicator light is always blue when the battery is between 80% ~100%.
• Indicator light is always blue and red when the battery is between 40% ~80%.
• Indicator light is always red when the battery is between 10% ~40%.
• Indicator light is ashing red when the battery is between 0% ~10%.
• Indicator light is always blue when charging.
• Indicator light is switched off when charge is complete.
• Indicator light is ashing blue during power up or when not connected to a network.
• Indicator light is always blue when connected to a network.
Status
03
Installing the SIM card and Micro SD card:
Turn ON/OFF:
Power Bank:
According to the below graphic demo, insert the SIM card (g.1) and Micro SD card (g.2) into the corresponding card slot.
• Turn on: Turn the power switch to ‘ON’.
• Turn off: Turn the power switch to ‘OFF’.
Please note: The default state is the Power Bank state. When a Network Cable is inserted, it will automatically switch to
the LAN state.
Turn on the Tri-Fi, select Power Bank state if not selected by default. Connect the device to be charged via USB cable.
Please note: In the state of SD card, LAN or 3G, Tri-Fi can also charge other devices at a slower capacity.
Please note: Do not plug or unplug the SIM card and Micro SD card when the device is working to avoid data loss.
04
Access the Internet through WiFi:
Step one: Switch on the Tri-Fi and select 3G state.
Step two: Establish a WiFi connection (Connect Computer for example).
1. Choose Start=>Control panel=>Network Connections=>Wireless Network
connection.
Please note: Before establishing a WiFi connection, you must ensure that
the computer is equipped with a wireless card. If the computer indicates
the existence of wireless networks, then the wireless card can be used.
Otherwise, you need check whether the wireless card can work.
2. Click to check the available wireless networks, this will show the list of
network connections.
3. Select the Tri-Fi SSID from the wireless networks lists and click ‘Connect’.
Please note: If the wireless network connection has opened a safe matching,
you will need to input a correct network password.
• SSID and password are printed on the label of Tri-Fi.
Wait until the wireless network connection icon appears on the bottom right of the computer screen. The connection is then
successful.
Step three: Access to the internet.
When the connection between user device and Tri-Fi is established, internet will be available immediately.
05
Login management page:
Memory Storage:
Modify the SSID and Password Key:
1. Conrm the connection of Tri-Fi with WiFi is established.
2. Open the browser, enter ‘http://192.168.43.1’ in the address
eld or just enter ‘192.168.43.1’.
3. Input username and password, then click ‘OK’.
Please note: The default username and password are ‘admin’.
Click ‘Settings’ to enter the Settings page.
Click ‘Storage’ to enter the memory storage page (this button
can be selected after Tri-Fi is switched to SD card state. Tri-Fi
has to be connected via LAN to access ‘Storage’ option).
1. Turn on the Tri-Fi.
2. Switch the Tri-Fi to the state of SD card. After Wi connection is established via LAN, login using the admin page. Click
‘Storage’ to access memory storage.
Please note: Multiple clients can browse the contents on the SD card at the same time. If you need to modify the contents,
please refer to the ‘Storage management’ section.
1. Choose Basic => Wizard.
2. Enter the SSID and Password Key that you need.
3. Click ‘Apply’.
06
Turn 3G to WiFi:
Manually congure APN:
Turn Wired Network to WiFi:
1. Insert SIM card.
2. Turn on the Tri-Fi.
3. Switch to the state of 3G.
1. Choose Basic =>WAN.
2. Select 3G as Connection Type.
3. Select Conguration as Manual Cong.
4. Enter Dial Number and APN (APN settings may vary).
5. Click ‘Apply’.
Please note: WorldSIM APN settings are preinstalled.
1. Turn on the Tri-Fi.
2. Insert the network cable (automatically switches to LAN).
When the data indicator light is blue, you can access the internet. Connection procedure above.
07
Static IP:
DHCP:
PPPoE:
1. Choose Basic => Wizard.
2. Select Static IP as Connection Type.
3. Enter IP, Subnet Mask and Default Gateway.
4. Click ‘Apply’.
Please note: Static IP, DHCP, PPPoE should ensure that the
state has switched to LAN and the system mode must be in
gateway mode.
1. Choose Basic =>WAN.
2. Select DHCP as Connection type.
3. Click ‘Apply’.
1. Choose Basic => Wizard.
2. Select PPPoE as Connection Type.
3. Enter User Name and Password.
4. Click ‘Apply’.
08
Table des matières
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
