TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
not light up No power
Please make sure that the PANDAMINI is connected to
your computer by the USB cable and the computer is
powered on. Sometimes change another USB cable or
computer is needed to make sure if the USB cable is
working fine.
No sound from
PANDAMINI
The PANDAMINI is MIDI-controller,
which means that it does not contain
any sounds inside.
Please make sure that the PANDAMINI is connected to
your computer or hardware sound module.
No sound from target
device
PANDAMINI is not properly
connected.
Check your computer’s USB connection to confirm that
the PANDAMINI is recognized. If necessary, replug the
connection and restart your computer.
PANDAMINI connected after
software application has started.
If controlling an external hardware module, make sure
that it’s a USB Host supporting device.
Problem is caused by use of a USB
hub.
Unplug the PANDAMINI from the USB hub and connect
directly to your computer.
Software application not set to
receive MIDI data from the
PANDAMINI.
Ensure that the PANDAMINI or “USB” MIDI device is
listed as an active MIDI source in your application.
Usually, the MIDI settings can be accessed through the
application’s Preferences menu.
PANDAMINI’s MIDI channel is not
the same as application’s incoming
MIDI channel.
Make sure that the PANDAMINI is sending MIDI
information on the channel that the target device
expects.
Keys/Pads/Knobs/Sliders
not working
Keys/Pads/Knobs/Sliders not set to
mapping to your DAW.
Make sure you have set the PANDAMINI to mapping to
your DAW manually. For more mapping info please visit
the download page of WORLDE website.
Drivers fail to install Computer’s got some problem on
USB port.
PANDAMINI is driver free device, so basically no driver is
required for this device. Please try to use the PANDAMINI
on another USB port or even on another computer.
PANDAMINI fails to
connect to computer Fail to connect to computer. Check your computer’s USB connection to confirm that
the PANDAMINI is recognized.
RGB pads colors can’t be
changed
Software editor is not used
properly.
Use the software editor to change the RGB colors of the
pads.
PANDAMINI is not working
properly with Software
applications
Mapping Settings for PANDAMINI
to Software application is not
finished.
The PANDAMINI is compatible with any software(Such as
Cubase, FL Studio, Bitwig, Ableton Live, Logic Pro and so
on) which supports the MIDI protocol. Please consult
your specific hardware or software device’s
documentation for instructions on enabling the
PANDAMINI as a MIDI input device.
CC No. of the Knobs,
Sliders, Pads can’t be
changed
Software editor is not used
properly.
Use the software editor to change the CC No. of the
Knobs, Sliders, and pads.
