WORKSWELL SMARTIS Manuel utilisateur
Quick Start Guide
Phone numbers
E
-
mail and Web
ID
Headquarters
+420
725
877 063
Reg. No.
:
29048575
Libocka 653/51b
+420
725
955
464
www.workswell.eu
VAT No.
CZ29048575
Prague, Czech Republic
Revision 1.0 EN, 17.1.2017
All pictures are only for illustration
.
Real values may vary
.
What else do you need?
User Manual
Confirm that the package contains the items listed below and can be
extended by additional accessories such as temperature filter, lens etc.
Before you start using your Workswell SMARTIS infrared camera, make
sure that you have all the equipment listed below to hand.
User Manual is available in electronic form on the website:
https://www.workswell-thermal-camera.com/thermal-imaging-camera-
smartis-industrial
Package Content
SMARTIS infrared camera
–
640/336/160 px model
One specific lens mounted on the camera with protection
glass cover
Standard Calibration certificate
1x Power supply cable 5-pin (2 meters)
1x Analogue & Digital IO cable 8-pin (2 meters)
1x Ethernet UTP5 cable (2 meters)
Quick start guide
Download Card
Hard transport case
Power source (
18 to
36 V
DC,
2
A)
Ethernet UTP cable
Workswell SMARTIS
- Connect power supply cable
For power supply, connect the 5-pin cable to the power suply connector.
The 8-pin cable use as needed for a digital outputs, analog outputs or
digital triggers.
SMARTIS
inputs and outputs
Phone numbers
E
-
mail and Web
ID
Headquarters
+420
725
877 063
Reg. No.
:
29048575
Libocka 653/51b
+420
725
955
464
www.workswell.eu
VAT No.
CZ29048575
Prague, Czech Republic
Revision 1.0 EN, 17.1.2017
All pictures are only for illustration
.
Real values may vary
.
Focusing the infrared camera
- Connect Ethernet UTP5 cable
Short distance Long distance
Remove the CAP Connect the UTP cable
Workswell SMARTIS
First connection
How to turn
the system
off?
1. Connect SMARTIS to Power Supply.
2. Connect your SMARTIS to your PC Ethernet port.
3. Set your computer IP address as static:
How to set up a static IP address on your PC is available at the following
link:
https://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-
address-in-xp-vista-or-windows-7/
a. IP address: 10.0.0.1
b. Netmask: 255.255.255.0
4. Connect to SMARTIS with web browser at http://10.0.0.225/
5. Log in as Admin, password 1234
Unplug your SMARTIS from power supply.
Phone numbers
E
-
mail and Web
ID
Headquarters
+420
725
877 063
Reg. No.
:
29048575
Libocka 653/51b
+420
725
955
464
www.workswell.eu
VAT No.
CZ29048575
Prague, Czech Republic
Revision 1.0 EN, 17.1.2017
All pictures are only for illustration
.
Real values may vary
.
Sales Department Headquarters Partners Worldwide
Mobile: +420 725 955 464 Workswell s.r.o.
E-mail: sales@workswell.eu Libocka 653/51b Visit our website for more details
160 00, Prague 6
Czech Republic
Company contact details
Mobile: +420 725 877 063
E-mail: info@workswell.eu
Contacts
Autres manuels pour SMARTIS
2
Table des matières
Autres manuels WORKSWELL Caméra thermique
WORKSWELL
WORKSWELL WIRIS PRO Manuel utilisateur
WORKSWELL
WORKSWELL WIRIS PRO Manuel utilisateur
WORKSWELL
WORKSWELL CWI-128 Manuel utilisateur
WORKSWELL
WORKSWELL MEDICAS Manuel utilisateur
WORKSWELL
WORKSWELL WIRIS PRO Manuel utilisateur
WORKSWELL
WORKSWELL SMARTIS Manuel utilisateur
WORKSWELL
WORKSWELL Wiris Manuel utilisateur
WORKSWELL
WORKSWELL SAFETIS Manuel utilisateur
WORKSWELL
WORKSWELL SMARTIS Manuel utilisateur
WORKSWELL
WORKSWELL GIS 320 Manuel utilisateur
