WorkPro W125020A Manuel utilisateur

W125020A

SAVE THIS MANUAL FOR FUTURE REFERENCE

Thank you for buying a WORKPRO product. Your angle polisher with variable speed has been engineered and

manufactured to WORKPRO’s high standard for dependability, ease of operation, and operator safety. When

properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator's manual

before using this product.

OPERATOR'S MANUAL

ANGLE POLISHER WITH

VARIABLE SPEED

Introduction .................................................................................................................................

Important safety instructions ....................................................................................................

Safety warnings .........................................................................................................................

Safety warnings common for grinding, sanding, wire brushing, polishing, or abrasive

cutting-off operations ................................................................................................................

Additional specific safety instructions ........................................................................................

Symbols ......................................................................................................................................

Know your product .....................................................................................................................

Technical specification ...............................................................................................................

Unpacking ..................................................................................................................................

Set up before use .......................................................................................................................

Operation instructions ......................................................................................................

Maintenance ..........................................................................................................................

Trouble shooting ....................................................................................................................

Recycling and disposal ..............................................................................................................

This tool has many features for making its use more pleasant and enjoyable. Safety, performance,

and dependability have been given top priority in the design of this product making it easy to

maintain and operate.

TABLE OF CONTENTS

INTRODUCTION

3,4

4,5

5,6

11,12,13

13,14

14,15



IMPORTANT SAFETY INSTRUCTIONS

WARNING!

READ THESE INSTRUCTIONS

WORK AREA











ELECTRICAL SAFETY



PERSONAL SAFETY



TOOL USE AND CARE



Read and understand all instructions. Failure to

follow all instructions listed below may result in

electric shock, fire, and/or serious personal injury.

Keep your work area clean and well lit.

Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of flamma-

ble liquids, gases, Power tools create sparks which

may ignite the dust or fumes.

Keep bystanders, children, and visitors away

while operating a power tool. Distractions can

cause you to lose control.

Avoid accidental starting. Be sure switch is

offbefore plugging in. Carrying tools with your

finger onthe switch or plugging in tools that have the

switch on invites accidents.

Remove adjusting keys or wrenches before

turning the tool on. A wrench or a key that is left

attached to a rotating part of the tool may result in

personal injury.

Do not overreach. Keep proper footing and

balance at all times. Proper footing and balance

enables better control of the tool in unexpected

situations.

Use safety equipment. Always wear eye protec-

tion. Dust mask, nonskid safety shoes, hard hat, or

hearing protection must be used for appropriate

conditions.

Do not wear loose clothing or jewelry. Contain

long hair. Loose clothes, jewelry, or long hair can be

drawn into air vents.

Do not use on a ladder or unstable support.

Stable footing on a solid surface enables better

control of the tool in unexpected situations.

Use clamps or other practical way to secure

andsupport the workpiece to a stable platform.

Holding the work by hand or against your body is

unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your

appli-cation. The correct tool will do the job better

and safer at the rate for which it is designed.

Do not use tool if switch does not turn it on or

off. Any tool that cannot be controlled with the

switch is dangerous and must be repaired.

Disconnect the plug from power source before

making any adjustments, changing accessories, or

storing the tool. Such preventive safety measures

reduce the risk of starting the tool accidentally.

Store idle tools out of the reach of children and

other untrained persons. Tools are dangerous in the

hands of untrained users.

Maintain tools with care. Keep cutting tools

sharp and clean. Properly maintained tools with

sharp cutting edges are less likely to bind and are

easier to control.

Check for misalignment or binding of moving

parts, breakage of parts, and any other condition

that may affect the tool’s operation. If damaged,

have the tool serviced before using. Many

accidents are caused by poorly maintained tools.

Use only accessories that are recommended by

the manufacturer for your model. Accessories that

may be suitable for one tool, may become hazardous

when used on another tool.

Keep the tool and its handle dry, clean and free

from oil and grease. Always use a clean cloth when

clean-ing. Never use brake fluids, gasoline,

petroleum-based products, or any strong solvents

to clean your tool.Following this rule will reduce the

risk of loss of control and deterioration of the

enclosure plastic.

Double insulated tools are equipped with a

polarized plug (one blade is wider than the other).

This plug will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician to install a polarized outlet. Do not

change the plug in any way. Double insulation

eliminates the need for the three-wire grounded

power cord and grounded power supply system.

Avoid body contact with grounded surfaces such

pipes, radiators, ranges, and refrigerators.

There is an increased risk of electric shock if your body

is grounded.



To reduce the risk of fire or electric shock, do not

ex-pose this product to rain or moisture. Store

indoors.

Do not abuse the cord. Never use the cord to carry

the tools or pull the plug from an outlet. Keep cord

away from heat, oil, sharp edges, or moving parts.

Replace damaged cords immediately. Damaged

cords increase the risk of electric shock.

When operating a power tool outside, use an

outdoorextension cord marked “W-A” or “W”.

These cords are rated for outdoor use and reduce the

risk of electric shock.

Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use tool while tired or under the influence of

drugs, alcohol, or medication. A moment of inatten-

tion while operating power tools may result in serious

personal injury.

Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric

shock, fire and/or serious injury. Save all warnings and

instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

WARNING!

SERVICE





IMPORTANT SAFETY INSTRUCTIONS

SAFETY WARNINGS







This product is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the product by a

person responsible for their safety.

Children should be supervised to ensure that they do

not play with the product.





TAKE SPECIAL CARE TO GUARD

AGAINST THESE DUSTS, INCLUDING

THE FOLLOWING:

All persons entering the work area must wear an

approved mask specially designed for protection

against harmful / toxic dusts, in addition to using the

dust extraction facility, and keeping work area well

ventilated.

Children and pregnant women must not enter the

work area.

Do not eat, drink or smoke in the work area.

To reduce the impact of noise and vibration emission,

limit the time of operation, use low-vibration and

lownoise operating modes as well as wear personal

protective equipment.

Take the following points into account to minimize

the vibration and noise

exposure risks:









VIBRATION AND NOISE REDUCTION

Switch off and disconnect from the power supply if

there are malfunctions. Have the product checked by

aqualified professional and repaired, if necessary,

before you operate it again.

Familiarise yourself with the use of this product by means

of this instruction manual. Memorise the safety directions

and follow them to the letter. This will help to prevent risks

and hazards.

EMERGENCY

Only use the product as intended by its design and

these instructions.

Ensure that the product is in good condition and well

maintained.

Use correct application tools for the product and

ensure they in good condition.

Keep tight grip on the handles/grip surface.

Maintain this product in accordance with these

instructions and keep it well lubricated (where

appropriate).

Plan your work schedule to spread any high vibration

tool use across a number of days.

Always be alert when using this product, so that you

can recognise and handle risks early. Fast intervention

can prevent serious injury and damage to property.

Tool service must be performed only by

qualifiedrepair personnel. Service or maintenance

performed by unqualified personnel may result in a

risk of injury.

When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Mainte-

nance section of this manual. Use of unauthorized

parts or failure tofollow Maintenance Instructions

may create a risk of shock or injury.

1. This power tool is intended to function as a sander

and polisher. Read all safety warnings, instructions,

illustrations and specifications provided with this

power tool. Failure to follow all instructions listed

below may result in electric shock, fire and/or

serious injury.

2. Operations such as grinding, wire brushing, or

cutting-off are not recommended to be performed

with this power tool. Operations for which the

power tool was not designed may create a hazard

and cause personal injury.

3. Do not use accessories which are not specifically

designed and recommended by the tool manufac-

turer. Just because the accessory can be attached

to your power tool, it does not assure safe

operation.

4. The rated speed of the accessory must be at least equal

to the maximum speed marked on the power tool.

Accessories running faster than their RATED SPEED

can break and fly apart.

5. The outside diameter and the thickness of your accessory

must be within the capacity rating of your power tool.

Incorrectly sized accessories cannot be adequately

guarded or controlled.

6. The arbor size of wheels, flanges, backing pads or any

other accessory must properly fit the spindle of the

power tool. Accessories with arbor holes that do not

match the mounting hardware of the power tool will run

out of balance, vibrate excessively and may cause loss

of control.



This product produces an electormagnetic field

during operation! This field may under some

circumstances interfere with active or passive

medical implants! To reduce the risk of serious

or fatal injury, we recommend persons with

medical implants to consult their doctor and the

medical implant manufacturer before operating

this product!

WARNING!

Some dust created by power sanding, sawing,

grinding, drilling and other construction activities

contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples

of these chemicals are:

• Lead from lead-based paint

• Crystalline silica from bricks and cement and other

masonry products

• Arsenic and chromium from chemically treated

timber

Your risk from these exposures varies, depending

upon how often you do this type of work. To reduce

your exposure to these chemicals:

• Work in a well-ventilated area.

• Work with approved protective equipment, such

as those dust masks that are specially designed to

filter microscopic particles.

WARNING!

Health defects resulting from vibration emission if

the product is being used over long periods of

time or not adequately managed and properly

maintained.

Injuries and damage to property due to broken

application tools or the sudden impact of hidden

objects during use.

Danger of injury and property damage caused by

flying objects

SAFETY WARNINGS

Even if you are operating this product in accordance

with all the safety requirements, potential risks of

injury and damage remain. The following dangers

can arise in connection with the structure and design

of this product:

RESIDUAL RISKS

SAFETY WARNINGS COMMON FOR GRINDING, SANDING, WIRE

BRUSHING,POLISHING, OR ABRASIVE CUTTING-OFF OPERATIONS

14. Regularly clean the power tool’s air vents. The

motor’s fan will draw the dust inside the housing and

excessive accumulation of powdered metal may cause

electrical hazards.

15. Do not operate the power tool near flammable

materials. Sparks could ignite these materials.

16. Do not use accessories that require liquid coolants.

Using water or other liquid coolants may result in

electrocution or shock.

17. Maintain labels and nameplates on the tool. These carry

important safety information. If unreadable or missing,

contact Harbor Freight Tools for a replacement.

18. Avoid unintentional starting. Prepare to begin work

before turning on the tool.

19. Do not depress the spindle lock when starting or during

operation.

20. Do not leave the tool unattended when it is plugged into

an electrical outlet. Turn off the tool, and unplug it from

its electrical outlet before leaving.

21. Use clamps (not included) or other practical ways to

secure and support the workpiece to a stable platform.

Holding the work by hand or against your body is

unstable and may lead to loss of control and personal

injury.

22. This product is not a toy. Keep it out of reach of children.

23. People with pacemakers should consult their physician

(s) before use. Electromagnetic fields in close proximity

to heart pacemaker could cause pacemaker interfer-

ence or pacemaker failure. In addition, people with

pacemakers should:

Avoid operating alone.

Do not use with power switch locked on.

Properly maintain and inspect to avoid electrical

shock.

Properly ground power cord. Ground fault circuit

Interrupter (GFCI) should also be implemented – it

prevents sustained electrical shock.

24. The warnings, precautions, and instructions discussed

in this instruction manual cannot cover all possible

conditions and situations that may occur. It must be

understood by the operator that common sense and

caution are factors which cannot be built into this

product, but must be supplied by the operator.



7. Do not use a damaged accessory. Before each

use inspect the accessory such as abrasive

wheels for chips and cracks, backing pad for

cracks, tear or excess wear, wire brush for

loose or cracked wires. If power tool or

accessory is dropped, inspect for damage or

install an undamaged accessory. After inspect-

ing and installing an accessory, position

yourself and bystanders away from the plane of

the rotating accessory and run the power tool at

maximum no-load speed for one minute.

Damaged accessories will normally break apart

during this test time.

8. Wear personal protective equipment. Depend-

ing on application, use face shield, safety

goggles or safety glasses. As appropriate, wear

dust mask, hearing protectors, gloves and

workshop apron capable of stopping small

abrasive or workpiece fragments. The eye

protection must be capable of stopping flying

debris generated by various operations. The eye

protection must be capable of stopping flying

debris generated by various operations. The

dust mask or respirator must be capable of filtering

out particles generated by your operation.

Prolonged exposure to high intensity noise may

cause hearing loss.

9. Keep bystanders a safe distance away from

work area. Anyone entering the work area must

wear personal protective equipment. Fragments

of workpiece or of a broken accessory may fly

away and cause injury beyond immediate area of

operation.

10. Hold power tool by insulated gripping surfaces

only, when performing an operation where the

accessory may contact hidden wiring or its own

cord. An accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and shock the operator.

11. Position the cord clear of the spinning accesso-

ry. If you lose control, the cord may be cut or

snagged and your hand or arm may be pulled into

the spinning accessory.

12. Never lay the power tool down until the

accessory has come to a complete stop. The

spinning accessory may grab the surface and pull

the power tool out of your control.

13. Do not run the power tool while carrying it at

your side. Accidental contact with the spinning

accessory could snag your clothing, pulling the

accessory into your body.

SAFETY WARNINGS COMMON FOR GRINDING, SANDING, WIRE

BRUSHING,POLISHING, OR ABRASIVE CUTTING-OFF OPERATIONS

RISK OF PERSONAL INJURY:

CAUTION: TO REDUCE THE RISK OF

INJURY OR PROPERTY DAMAGE:



Always use proper guards when grinding and wear

eye protection. Use only accessories rated at least

4000/min.

Failure to properly seat the bonnet to the pad may

result in the bonnet being thrown from the pad.

Always maintain a firm grip on the Waxer/Polisher

handle(s) to prevent loss of control.



Do not use tool if ON/OFF Trigger does not turn it

ON or OFF. Any tool that cannot be controlled with

the power switch is dangerous and must be

repaired.

Operate this waxer/polisher ONLY on AC current

on which the voltage is within correct limits (120

volts). Never attempt to operate on DC current. To

do so may seriously damage the waxer/polisher.

Always disconnect the unit’s cord plug from power

source before making any adjustments, changing

bonnets or storing the tool to reduce the risk of

accidentally starting the waxer/polisher.

Check for misalignment or binding of moving

parts, breakage of parts, and any other condition

that may affect the waxer/polisher’s operation. If

damaged, have the tool serviced before using.

Use only accessories that are supplied or

recommended by the manufacturer for this model.

Refer to the “Accessories” section of this Instruc-

tion Manual for more information.

NEVER allow Gasoline, Brake Fluids or any

petroleum-based products to come in contact with

plastic parts or power cord. They contain

chemicals that can damage, weaken or destroy

plastic and insulation.

Make sure that adjusting keys and wrenches are

detached from the unit before turning it ON.

Use clamps or another practical way to secure and

support the work piece to a stable platform. Holding

the work by hand or against your body is unstable

and may lead to loss of control.

Use of this tool can generate and/or disburse dust,

which may cause serious and permanent respiratory

or other injury. Always use NIOSH/OSHA approved

respiratory protection appropriate for the dust

exposure. Keep direct particles away from face and

body.

Note: Only those dust masks suitable for working

with lead paint dust and fumes should be used.

Ordinary painting masks do not offer this protection.

See your local hardware dealer for the proper

NIOSH/OSHA approved mask.

ADDITIONAL SPECIFIC SAFETY INSTRUCTIONS

WARNING!

SYMBOLS

On the product, the rating label and within these instructions you will find among others the following symbols

and abbreviations. Familiarize yourself with them to reduce hazards like personal injuries and damage to

property.

-1

Switch the product off and disconnect it from the power supply before assembly, cleaning,

adjustments, maintenance, storage and transportation.

This product is of protection class II. That means it is equipped with enhanced or double

insulation.

Comforms to American directives.

Waste electrical products should not be disposed of with household waste. Please recycle

where facilities exist. Check with your Local Authority or local store for recycling advice.

Volt, (alternating voltage)

Hertz

Watt

Per minute

Lock / to tighten or secure.

Note / Remark.

Read the instructionmanual.

Wear eye protection.

Wear protective gloves.

Millimetre

Kilogram

Decibel (A-rated)

Metres per second squared

Unlock / to loosen.

Caution / Warning.

Wear hearing protection.

Wear a dust mask.

Wear protective, slipresistant

footwear.

dB(A)

m/s²

/min or min



KNOW YOUR PRODUCT

1. Auxiliary handle

2. Spindle lock button

3. Grinder spindle

4. Speed adjustment

5. Power cord

6. ON/ OFF Switch

7. Backing pad

TECHNICAL SPECIFICATION

UNPACKING

Model #:

Rated Voltage:

Rated Power:

No-load Speed:

Diameter:

W125020A

120V~60Hz

10A

1500-4000RPM

7in (180mm)

Unpack all parts and lay them on a flat, stable

surface.

Remove all packing materials and shipping devices if

applicable.

Make sure the delivery contents are complete and

free of any damage. If you find that parts are missing

or show damage do not use the product but contact

your dealer. Using an incomplete or damaged

product represents a hazard to people and property.

Ensure that you have all the accessories and tools

needed for assembly and operation. This also

includes suitable personal protective equipment.

INTENDED USE

INSTALLING THE AUXILIARY HANDLES

INSTALLING THE BACKING PAD/FOAM

PAD

SET UP BEFORE USE



The machine is intended for polishing and sanding of

painted or fiberglass surfaces. For reasons of

electrical safety the machine must not be damp or

operated in a humid environment. The machine may

only be used for dry sanding, buffing or polishing.

Option 2: Using with a side handle (side handle

not included).

This tool can be used with many standard angle

grinder side handles which can be installed on

either side.

1. The accessory MUST be:

Rated to at least 4000 rpm.

No larger than 7” (180 mm) in diameter.

Fitted with a threaded opening of 5/8”

Undamaged

A backing pad.

2. Press in and hold the Spindle Lock Button to

prevent the Spindle from turning.

3. Thread the Backing Pad onto the spindle until

firmly secured in place.

Insert hex key

through here to

access bolt

Install side

handle here or here



TO PREVENT SERIOUS INJURY: Do not operate

this tool without an auxiliary handle properly

installed.

The D-handle (included) may be installed for either

right-hand or left-hand use.

Option 1: using with the D-handle. Attach the

D-handle to the sides of the front cover, using the

hex key and two hex head bolts.

Note: Slide the hex key through the hole in the

handle to access the bolt on the long side of the

handle.

WARNING!

To reduce the risk of injury, turn the unit off and

disconnect it from the power source before

installing and removing accessories, before

adjusting or making repairs. An accidental start-up

can cause injury.

WARNING!

To reduce the risk of injury, turn the unit off

and disconnect it from the power source

before installing and removing accessories,

before adjusting or making repairs. An

accidental start-up can cause injury.

To install pad or disc on Velcro backing plate,

center the pad or discover plate and press

firmly.

To remove pad or disc from Velcro backing

plate grip pad or disc firmly and pull from

plate.

Table des matières

Autres manuels WorkPro Sander

WorkPro

WorkPro W125108A Manuel utilisateur

Manuels Sander populaires d'autres marques

Oliver

Oliver 6305 Manuel utilisateur

Jet

Jet 22-44 Pro-3 Manuel de service

Makita

Makita M9204 Manuel

Makita

Makita M9204 Manuel utilisateur

Craftsman

Craftsman 351.215131 Manuel utilisateur

Clarke

Clarke Woodworker CBS1-5B Mode d’emploi

Chicago Pneumatic

Chicago Pneumatic CP9778 Manuel utilisateur

Nitto Kohki

Nitto Kohki BB-20 Manuel utilisateur

Ferm

Ferm FEOS-135 Manuel utilisateur

Unior

Unior 1510 Manuel utilisateur

stayer

stayer ls1200 Manuel utilisateur

Jet

Jet JSG-96 Manuel de service

Parkside

Parkside PDS 290 B2 Manuel utilisateur

Status

Status XPA Series Manuel utilisateur

Clarke

Clarke EZ Sand Manuel utilisateur

Craftsman

Craftsman 113.22521 Manuel utilisateur

Craftsman

Craftsman 113.225831 Manuel utilisateur

CLAS

CLAS OP 1429 Manuel utilisateur