Woodward TQ-125 Mode d’emploi

Table des matières

Autres manuels Woodward Contrôleurs

Woodward

Woodward LS 4 Manuel utilisateur

Woodward

Woodward UG-5.7 Dial Manuel utilisateur

Woodward

Woodward EG-3P Manuel utilisateur

Woodward

Woodward 505 Manuel utilisateur

Woodward

Woodward ProTech-GII Manuel utilisateur

Woodward

Woodward ELA 150 Manuel utilisateur

Woodward

Woodward 2301A Manuel du propriétaire

Woodward

Woodward EGCP-2 Manuel utilisateur

Woodward

Woodward Atlas-II 8273-552 Manuel utilisateur

Woodward

Woodward DPG-2223-00 Series Manuel utilisateur

Woodward

Woodward 94911 Manuel utilisateur

Woodward

Woodward 723PLUS Manuel utilisateur

Woodward

Woodward easYgen-400 Manuel utilisateur

Woodward

Woodward LS-5 v2 Series Manuel utilisateur

Woodward

Woodward easYgen-3400 P1 Manuel utilisateur

Woodward

Woodward ProAct P Series FL Mode d'emploi

Woodward

Woodward 2301D Manuel utilisateur

Woodward

Woodward easYgen-1600 Manuel utilisateur

Woodward

Woodward EPG 512 Manuel utilisateur

Woodward

Woodward DTSC-200 Feuille d'instructions

Woodward

Woodward EG-3P Manuel utilisateur

Woodward

Woodward TecJet 110 Manuel utilisateur

Woodward

Woodward 723PLUS Manuel utilisateur

Woodward

Woodward 505 Manuel du propriétaire

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur

Application Note 01300

(Revision NEW, 9/2000)

Original Instructions

TQ-125

Linkage Installation and Adjustment

Woodward reserves the right to update any portion of this publication at any time. Information provided by Woodward is

believed to be correct and reliable. However, no responsibility is assumed by Woodward unless otherwise expressly

undertaken. Copyright © Woodward 2000

All Rights Reserved

TQ-125 Linkage Installation & Adjustment Application Note 01300

2 Woodward

TQ-125

Linkage Installation and Adjustment

General

The linkage kit for the TQ-125 generally consists of the following parts: two rod

ends, a terminal lever, a length of threaded rod, and the associated hardware to

attach these items between the TQ-125 and the prime mover fuel control.

Linkage Compatibility

Match the actuator's direction of rotation with the fuel control's direction of

increased fuel. The TQ-125 has a counterclockwise rotation as viewed from the

shaft end for an increase fuel condition.

The linkage for diesel engine applications should be linear, and matched to the

TQ-125. The TQ-125 has a 60° shaft rotation. Carbureted engines will require a

carburetor compensating (non-linear) linkage. Incorrect linearity matching can

cause stable operation at some fuel settings but oscillation at other fuel settings.

Manually stroke the fuel control linkage from stop to stop as if the actuator were

moving it. The linkage should not bind or have play in it. Lubricate or replace

linkage or fuel control parts as required.

Make sure the actuator is capable of moving the fuel control to maximum and

minimum limits. Let the fuel control limit actuator travel. Set the linkage so the

actuator is just above minimum when the fuel control is at its minimum stop and

so the actuator is just below maximum when the fuel control is at its maximum

stop.

A positive shutdown device, such as a spring, is required to ensure shutdown

upon loss of signal to the TQ-125.

Any unauthorized modifications to or use of this equipment outside

its specified mechanical, electrical, or other operating limits may

cause personal injury and/or property damage, including damage to

the equipment. Any such unauthorized modifications: (i) constitute

"misuse" and/or "negligence" within the meaning of the product

warranty thereby excluding warranty coverage for any resulting

damage, and (ii) invalidate product certifications or listings.

We appreciate your comments about the content of our publications.

Send comments to: icinfo@woodward.com

Please reference publication 01300.

PO Box 1519, Fort Collins CO 80522-1519, USA

1000 East Drake Road, Fort Collins CO 80525, USA

Phone +1 (970) 482-5811 Fax +1 (970) 498-3058

Email and Website—www.woodward.com

Woodward has company-owned plants, subsidiaries, and branches,

as well as authorized distributors and other authorized service and sales facilities throughout the world.

Complete address / phone / fax / email information for all locations is available on our website.