www.woodbridgebath.com
6
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
Usage Instruction
Other operations
Water tank flush volume adjustment
(Only for the toilet with water tank flush volume adjustment function)
· Press and hold " " button, and press the water volume " + " button to increase full flush volume by
1 level.
· Press and hold " " button, and press the water volume " - " button to reduce full flush volume by 1
level.
· Press and hold " " button, and press the water volume " + " button to increase half flush volume by
1 level.
· Press and hold " " button, and press the water volume " - " button to reduce half flush volume by 1
level.
User code
Auto deodorization
· Radio frequency remote control
① Shut off the power supply of toilet.
② Press and hold " " button, then press " " button, the indicator light will flash.
③ Re-connect the power plug and press "reset" button.
④ The indicator stops flashing and stays on for 2 seconds, indicating that the remote control and the
toilet are matched successfully. It beeps once when the self-inspection completes. Then the remote
control is ready for use.
· Press and hold " " button and press " " button to turn on/off auto deodorization function.
The deodorization function will be automatically turned on when the user is seated, and will stop after
leaving. Under drying, deodorization will stop. (This function is turned on by default.)
Quite mode
· Press and hold " " button and press " " button to turn on/off quite mode.
Sterilization function
· When no one seated and washing/drying is off, long press " " button to turn on plasma sterilization
function.This function will stop automatically after 2 hours. Under this mode, if any other button is
pressed or user is seated, it will stop automatically. (Only for the toilet with sterilization function.)
