Woo Audio WTP-1 Manuel utilisateur
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20141
WOO AUDIO WTP-1AND WDS-1
Top-Loading CD Transport
&
24-Bit/192kHz Digital to Analog Convertor
Owner’s Manual
Please review this manual before operating your WOO AUDIO™ product.
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20142
Important Safety Information
CAUTION: These amplifiers are shipped without the vacuum
tubes installed. It is necessary to install the tubes first. It
is essential that the tubes are installed correctly or serious damage
that is not covered by the warranty will result.
Turn off immediately in the event of malfunction
Should you notice smoke or an unusual smell coming from the
equipments, turn it off immediately. Continued operation could
result in injury.
Do not disassemble
High voltage circuit. Touching the product’s internal parts could
result in injury. In the event of malfunction, the product should be
repaired only by a qualified technician.
Keep out of children
Failure to observe this precaution could result in injury
WARNING: Failure to follow these instructions could result in
fire, electric shock, or other injury or damage.
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20143
Table of Contents
IMPORTANT SAFETY INFORMATION 2
TABLE OF CONTENTS 3
OVERVIEW 4
GETTING STARTED 6
QUICK INSTALLATION 10
OPERATIONS 14
FAQ - FREQUENTLY ASKED QUESTIONS 16
WARRANTY AND SERVICE 17
PRODUCT SPECIFICATION WDS-1 18
PRODUCT SPECIFICATION WTP-1 19
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20144
WTP-1 Overview
Thank you for choosing a Woo Audio product. The WTP-1 is finely hand-crafted Top-
Loading CD Transport that delivers uncompromised performance and superior listening
experience.
Vibration resistant CD tray construction
Customized high damping suspension springs for CD tray
½” (13mm) thick solid aluminum CD tray, CNC milled
High precision magnetic disc clamp with short circuit ring and low
mechanical inertia
High traction CD cover arm
VFD monitor
Customized ultra-low temperature coefficient Crystal clock
Customized toroidal power transformer
Individual power supplies for both digital and mechanical circuits
Multi-layer military grade PCBs
Ultra-low noise, high precision resistors and selected components
All-aluminum layered chassis with no screws visible from any viewing
angles
Allows for track forward/backward, play/pause, stop, fast-
forward/backward, track repeat, and play-time in different modes
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20145
WDS-1 Overview
Thank you for choosing a Woo Audio product. The WDS-1 is finely hand-crafted Digital
to Analog Converter that delivers uncompromised performance and superior listening
experience.
24-Bit, 192kHz high resolution playback
Ultra-low jitter USB 2.0 runs on Asynchronous mode
S/PDIF interfaces through Optical, Coaxial, and AES/EBU through XLR
connector
Digital volume control allows for direct connection to any power amplifier
VFD monitor display
Input switching button for all digital inputs
Selectable digital filter in Sharp and Slow modes
All-aluminum chassis with no screws visible from any viewing angles
Individual power supplies for both digital and analog circuitries
Multi-layer military grade PCBs
Customized driver for Windows XP/Vista/7/8
USB Audio Class 2.0 is natively supported by Apple OS X version 10.6.4
and above
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20146
Getting Started
What’s in the box?
WTP-1
①WTP-1 Top-Loading CD
Transport
②PremiumRemote Control
③Magnetic Disc Clamp
④Rubber Transport Plate
WTP-1
①WDS-1 Digital to Analog Converter
Power cord and AC Umbilical cord are not included and can be purchased separately.
Foot Stands may also be purchased separately to allow for stacking of the 2 units.
The Premium Remote Control may be purchased separately to accompany the WDS-1
1
3
4
2
1
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20147
Back Panel Diagram
①AC Inlet
②AC Umbilical Cord Female Outlet
③AC Umbilical Cord Male Inlet
④Fuse Port
⑤Optical Output(Top) and Input(Bottom)
⑥AES/EBU Output(Top) and Input(Bottom)
⑦Coaxial BNC Output(Top) and BNC Input(Bottom)
⑧USB 2.0 Input
⑨XLR Balanced Outputs
⑩RCA Unbalanced Outputs
12
4
5
6
3
8
9
7
10
WDS-1
WTP-1
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20148
Front Panel Diagram
⑪WTP-1 Power Button/Simultaneous Power button when units are stacked
⑫WDS-1 Power Button
⑬Play/Pause Button
⑭Stop Button
⑮Rev/Rewind(Hold down) Button
⑯Next/Fast Forward(Hold Down) Button
⑰Input Button
⑱Filter Button
⑲Volume Down
⑳Volume Up
11
12
20191817
1615
1413
WDS-1
WTP-1
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,20149
Premium Remote Control
The Premium Remote Control is included standard with the WTP-1 and can be
purchased separately for the WDS-1
Premium Remote Control has a range of 10 feet working at angles up to 30 degrees
Stop ButtonPlay/Pause Button
Next Track/Fast ForwardLast Track/Rewind
Time SelectorRepeat 1/all/off
Input selector USB/
Coaxial/Optical/AES/EBU Filter Selector Slow/Sharp
Volume UpVolume Down
©2012WOOAUDIOtmInc.Allrightsreserved.www.wooaudio.comRev1.1.Feb20,201410
Quick Installation
Installing the power cord:
Plug the power cord into the AC inlet; see ①in the above diagram. The AC inlet socket is a
standard IEC type. You will need to obtain the correct type for your region.
Take the AC umbilical cord and plug it into AC Female Outlet ②of the WTP-1 and AC
Male Inlet of WDS-1 ③. Refer to the above diagram.
* If you are intending to use the AC umbilical cord to stack the two units, attach and
power up the two units first side by side before stacking the units together. This is to
make sure that both the WTP-1 and WDS-1 are powered up.
Stacking:
The WTP-1 and WDS-1 are capable of stacking together when the optional foot
stands are purchased.
U.S.
European
U.K.
Ce manuel convient aux modèles suivants
1
Table des matières
