Wonderfire Sonnet Plus Manuel utilisateur

600B656/04

Plus

PlusPlus

Plus

Model BR645 VA

(G.C. 32-032-34)

OWNER’S GUIDE

This guide is intended to help you care for your Wonderfire gas fire. Please read

thoroughly before using and keep for future reference.

We trust that this Guide gives sufficient details to enable the appliance to be operated and

maintained satisfactorily. However, if further information is required, our AdviceLine

will be pleased to help.

Please telephone 0345 626341 (Local call rates apply in the United Kingdom).

In the Republic of Ireland call 353 183 75114.

Please keep this guide in a safe place for future reference

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 2

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 3

As supplied, this appliance is for use with natural gas (G20)

When converted using conversion kit no. 591149 this appliance is for use with propane

gas (G31)

This appliance is for use in the United Kingdom (GB) and the Republic of Ireland (IE)

only.

CUSTOMER CARE

Thank you for choosing Wonderfire.

All Wonderfire gas fires are designed to meet the most stringent quality, performance and

safety requirements to provide our customers with many years’ trouble-free service.

Your owner guide aims to improve your understanding and appreciation of your

Wonderfire gas appliance by providing simple and informative instructions to ensure that

you benefit from the excellent performance and features it has to offer.

If you require further assistance or any advice about gas in general, our AdviceLine will be

pleased to help.

Please telephone 0345-626341 (local call rates apply in the United Kingdom).

In the Republic of Ireland please telephone 353 183 75114

LIST OF CONTENTS

SAFETY..................................................................................................................... 4

OPERATING YOUR FIRE..................................................................................... 5

CLEANING............................................................................................................... 7

REFITTING COALS............................................................................................... 8

MAINTENANCE....................................................................................................10

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 4

SAFETY

IF YOU SMELL GAS

DON’T SMOKE

EXTINGUISH ALL NAKED FLAMES

DON’T TURN ELECTRICAL SWITCHES ON OR OFF

TURN OFF THE GAS SUPPLY AT THE METER

OPEN DOORS AND WINDOWS TO GET RID OF THE GAS

IMMEDIATELY CALL THE GAS EMERGENCY SERVICE – SEE YOUR

LOCAL TELEPHONE DIRECTORY

•Have the fire installed by a competent person. In the United Kingdom, installation

must be in accordance with the latest edition of the Gas Safety (installation & use)

Regulations. In the Republic of Ireland, installation must be in accordance with all

national and local regulations in force.

•Have the chimney swept prior to installation if it was previously used for solid fuel.

•Have the fire installed in accordance with the installation instructions

•Provide a minimum clearance of 750mm from the top surface of the hearth to any shelf

made of wood or other combustible material where the shelf is not more than 150mm

deep. For a shelf deeper than 150mm, add 12.5mm to the clearance for every 25mm of

additional shelf depth.

•Always use a fireguard complying with BS6539 or BS6778 for the protection of young

children, the elderly or infirm.

•Wait three minutes before attempting to relight if the fire is switched off or the flames

are extinguished for any reason.

•Get advice about the suitability of any wall covering near your fire. Soft wall coverings

(e.g. embossed vinyl, etc.) which have a raised pattern are easily affected by heat. They

may, therefore, scorch or become discoloured when close to a heating appliance.

Please bear this in mind whenever you are considering redecorating.

•Provide a minimum clearance of 100mm from the outside of the fire case to any corner

wall or other surface. Please bear this in mind if ever you are altering the room.

•DON’T

•Hang clothing, towels or any other fabrics over the fire.

•Throw paper or other materials onto your fire.

•Use the fire with damaged base coals.

•Put more loose coals on the fire than the number given in this guide or use any coals

other than those authorised for this fire. Incorrect combustion could result.

•Attempt to clean or service the fire until it has been switched off and allowed to cool.

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 5

Figure 1

OPERATING YOUR FIRE

PLEASE NOTE

When operating your fire for the first time, some vapours may be given off which may

cause a slight odour and could possibly set off any smoke alarms in the immediate

vicinity. These vapours are quite normal with new appliances. They are totally harmless

and will disappear after a few hours use.

The Oxysafe flame sensing & flue blockage safety system.

For your safety, this appliance is fitted with a flue blockage safety device which will shut

down the appliance in the event of abnormal flue conditions. This device is NOT a

substitute for an independently mounted Carbon Monoxide detector.

The device will also automatically shut off the gas supply to the fire if the pilot flame

goes out due to lack of oxygen or for any other reason.

If this device starts to repeatedly shut off the gas, get expert advice.

This device incorporates a probe which senses that the heat from the pilot flame is

correct. If this probe is cool, the device will prevent any gas flow unless the control knob

is kept depressed at the “Pilot/Ign” position.

If, for any reason, the flames go out when the fire is hot or if the fire is turned off when

hot, always wait at least three minutes before attempting to relight.

Lighting the pilot

This fire is controlled by a 4-position gas tap mounted on

the front leg of the appliance. In addition to the “Off”

position there is a pilot light and 2 heat control settings.

See figure 1.

•Depress the control knob and turn anticlockwise

towards the “Pilot/Ign” position. A spark should be

generated at the pilot while turning. The spark should

ignite the pilot. The pilot flame can be seen below the

coal at the front left side.

•Keep the button at the “Pilot/Ign” position for a further

ten seconds. This will prevent the flame-sensing device

from shutting off the gas while its probe warms up.

•If the pilot does not ignite instantly, repeat procedure.

If after 10 seconds pilot ignition has not occurred, turn

the control knob back to the “Off” position, wait for 3

minutes and then repeat the ignition procedure.

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 6

Lighting the Main Burner

•Once the pilot light is established, the main burner can be lit by depressing and

turning the control knob anticlockwise to the “High” position.

Selecting the Heat Setting

•In order to change from one setting to another depress the control knob slightly and

turn the knob to the required position. Any setting from “Low” to “High” may be

selected.

Note: The appliance will operate to its maximum potential if the flue is primed during the

first 20-30 minutes of operation. To do this, simply operate the appliance at its “High”

setting. This will also burn off any carbon deposits that may have formed during previous

operations. If operating the appliance for long periods it is beneficial to change between

settings. This will help to remove any carbon deposits that may form during operation.

Turning the fire back to Pilot Setting

•Depress the control knob and turn clockwise until the pilot setting is reached.

Turning the Appliance Off

•Make sure that the control knob is in the pilot position. Depress the control knob and

turn clockwise to the “Off” position.

•Wait at least three minutes before relighting.

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 7

CLEANING

To maintain the high performance and quality finish of your Wonderfire appliance,

please follow these guidelines:

•Before attempting to clean the fire, please remember to turn off the fire and wait for

the appliance to cool. The fire will retain heat for some time before cleaning can begin.

•If any pieces of debris are found in the firebox, have the chimney inspected before

further use.

Metal Parts

•Clean the metal parts with a slightly damp cloth and then dry.

•Do not use abrasive cleaners as these will scratch the fire surface.

Ceramic Coals and Rear Wall

•Light coatings of soot will usually be burnt off during the normal operation of the fire.

•Should any soot accumulation become excessive, the fuel effect pieces and walls

should be removed from the fire for cleaning.

•This product uses fuel effect pieces and burner compartment walls containing

Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.

Excessive exposure to this material may cause temporary irritation to eyes, skin and

respiratory tract. Consequently, it makes sense to take care when handling these articles

to ensure that the release of dust is kept to a minimum.

•Cleaning should be carried out in a well ventilated area or in the open air by gently

brushing with the pieces held away from your face so that you avoid inhaling the dust.

•We do not recommend the use of a normal domestic vacuum cleaner which may blow

dust back into the air.

•We suggest that you remove the coals in the reverse order to that shown in the fuel

bed refitting instructions.

Burner

•The burner surface can be carefully cleaned to remove any loose particles after taking

off the coals. Make sure that no particles are pushed into the burner slots.

Note: Surface cracking of the burner is normal and no cause for concern.

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 8

Figure 5 Loose Coal Identification

Figure 4 Front Base Coal Position

Figure 3 Rear Base Coal Position

Figure 2 Ceramic Rear Wall

Position

REFITTING COALS

1. Fit the ceramic rear wall into the bracket at the

back of the firebox. See figure 2.

2. Place the rear base coal in the firebox. It should

rest on the ledges at the sides and back of the firebox

and its rear face should touch the rear ceramic wall.

See figure 3.

3. Place the front

base coal in the

firebox with its

bottom front locating

over the front rim of

the firebox. Pull the

coal forward so that

it locates

immediately behind

the front rim of the

firebox. See figure 4.

4. There are two types of loose coals.

Type “A” coals have a prominent lip. There are

three coals of this type.

Type “B” are squarer

than type “A” and have

two grooves on their

top surface.

The coals are shown in

figure 5. Identify these

coals before attempting

to fit them.

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 9

Figure 10

Figure 9

Figure 8

Figure 7

Figure 6

5. Place a type “A” coal between

the front and rear base coals with its

lip to the front and so that the coal

is close to the left side of the

firebox. See figure 6.

6. Place a type “B” coal between

the front and rear base coals as

shown in figure 7. Its two grooves

should be on the top surface. Its

wide flat end should be at the back

between the left and centre coals of

the rear base coal.

7. Place a type “A” coal between

the front and rear base coals with

its lip to the back and resting against

the centre coal of the rear base coal

as shown in figure 8.

8. Place the remaining type “B”

coal at the right side of the firebox

between the front and rear base

coals. Its two grooves should be on

the top surface with the wide flat

end to the front. The coal should

touch the right side of the firebox.

See figure 9.

9. Place the remaining type “A”

coal between the front and rear

base coals with its lip to the front

and its rear face between the right

and centre coals of the rear base

coal. Angle the coal so that the gap

between it and the type “B” coal to

its right is appreciably larger than

the gap between it and the type “A”

coal to its left but do not have it

touching the type “A” coal. This will give the best flame effect. See figure 10.

All manuals and user guides at all-guides.com

OWNER’S GUIDE

Page 10

MAINTENANCE

Regular maintenance

In order to achieve and maintain high levels of personal safety and performance

efficiency, it is essential that the opening at the back of the fire and the flue are kept clear

of any form of obstruction. It is possible that deposits of mortar or soot could fall and

accumulate causing the flue to be blocked or restricted and so preventing proper

clearance of dangerous exhaust fumes.

In the United Kingdom it is the law that a landlord must have any gas appliance, flue and

pipework which is situated in a tenant’s premises checked for safety at least every twelve

months by a competent person (In the U.K, a CORGI registered installer).

We recommend that all gas appliances and their flues, wherever situated, are checked

annually.

Servicing

•In the United Kingdom servicing can be carried out either by a Wonderfire service

engineer or a CORGI registered installer.

•If you require your fire to be serviced, please contact Wonderfire Service on 0121

386 6203 and quote the following details;

a) model name and number.

b) appliance serial no. (To be found on the plate close to the control knob.)

•If you wish to replace any of the owner replaceable parts listed below, please contact

Wonderfire Sales on 0121 386 6295 for your nearest stockist of these parts. When

ordering please quote the part number shown below.

Owner Replaceable Parts

Description Part No

Ceramic rear wall 579139

Front base coal 579119

Rear base coal 579129

Pack of 5 loose coals 579149

•When fitting replacement parts, follow the instructions contained in this guide. It

is important that only Wonderfire approved parts are used for maximum safety.

•In the United Kingdom, for general advice about gas and your gas fire call our

ADVICELINE 0345 626 341.

•In the Republic of Ireland call 353 183 75114 for all enquiries.

All manuals and user guides at all-guides.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Wonderfire Cheminée intérieure

Wonderfire

Wonderfire 037 Instructions de montage

Wonderfire

Wonderfire airflame excel mk.3 ac 18xl rc Manuel utilisateur

Wonderfire

Wonderfire airflame excel mk.3 AC 16XL Manuel utilisateur

Wonderfire

Wonderfire 961 Instructions d'utilisation

Wonderfire

Wonderfire Avignon Instructions de montage

Wonderfire

Wonderfire Eclipse 654 Instructions de montage

Wonderfire

Wonderfire BR265 Manuel utilisateur

Wonderfire

Wonderfire 955 Instructions d'utilisation

Wonderfire

Wonderfire sonnet br218 Manuel utilisateur

Wonderfire

Wonderfire 961 Mode d’emploi

Wonderfire

Wonderfire Marseille BR622 Instructions de montage

Wonderfire

Wonderfire 961 Mode d’emploi

Wonderfire

Wonderfire BR00290 SONNET Instructions de montage

Wonderfire

Wonderfire Nexus Instructions de montage

Wonderfire

Wonderfire lincoln 5403 Manuel utilisateur

Wonderfire

Wonderfire BR00290 SONNET Manuel utilisateur

Wonderfire

Wonderfire Eclipse 654 Manuel utilisateur

Wonderfire

Wonderfire The Gallery BR218C1 Guide de l'utilisateur

Wonderfire

Wonderfire 762 Instructions d'utilisation

Wonderfire

Wonderfire airflame excel mk.3 AC 16XL RC Manuel utilisateur

Wonderfire

Wonderfire nexus BR648 VA Manuel utilisateur

Wonderfire

Wonderfire Marseille BR622 Manuel utilisateur

Wonderfire

Wonderfire BR419 Manuel utilisateur

Wonderfire

Wonderfire airflame excel mk.3 ac 18xl Manuel utilisateur

Manuels Cheminée intérieure populaires d'autres marques

Brigantia

Brigantia 35-DVRS31N-2 Manuel du propriétaire

Nordpeis

Nordpeis Bergen Manuel utilisateur

Superior

Superior BCT2536TMN Manuel utilisateur

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuel utilisateur

Renaissance

Renaissance RUMFORD 1000 Manuel utilisateur

Lacunza

Lacunza IV-800 Manuel utilisateur

Baxi

Baxi 940 Instructions d'utilisation

Dru

Dru Maestro 60/2 Tall RCH Manuel utilisateur

Diamond Fireglass

Diamond Fireglass SS-O22 Manuel utilisateur

HearthStone

HearthStone Windsor Bay 8830 Manuel de programmation

Napoleon

Napoleon ASCENT B42 Manuel utilisateur

Enviro

Enviro E33GI Manuel utilisateur

Smeg

Smeg L30 FABE Instructions de montage

KEDDY

KEDDY K700 Manuel utilisateur

Godin

Godin 3451 Manuel utilisateur

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuel utilisateur

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuel utilisateur

Desa

Desa CCFPDFT Manuel d'utilisation