Winmate P-CAP SERIES Manuel utilisateur

Flat Stainless P-CAP

Panel PC

Intel®Core™i5-5200U Broadwell 2.2 GHz (turbo to 2.7 GHz)

Full IP65

User Manual

Version 1.0

Document Part Number: 9152111I101G

IP65 Flat Stainless P-CAP Panel PC

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve design

and/or performance. We assume no responsibility or liability for the use of the described

product(s) conveys no license or title under any patent, copyright, or masks work rights to

these products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer discovers

a defect, we will, at his/her option, repair or replace the defective product at no charge to the

customer, provide it is returned during the warranty period of one year, with transportation

charges prepaid. The returned product must be properly packaged in its original packaging to

obtain warranty service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit

means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

IP65 Flat Stainless P-CAP Panel PC

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

IP65 Flat Stainless P-CAP Panel PC

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid

the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à

la terre incorrecte.

IP65 Flat Stainless P-CAP Panel PC

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is

on. Sensitive electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges.

As a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les

composantes électroniques sur une surface conçue pour dissiper les charge,

ou dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

IP65 Flat Stainless P-CAP Panel PC

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep this

user manual for future reference.

Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

The openings on the enclosure are for air convection and to protect the equipment

from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work according

to the user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

IP65 Flat Stainless P-CAP Panel PC

vii

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si

vous doutez de leur provenance, contactez le manufacturier.

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

Use anti-static mats, heel straps, or air ionizer for added protection.

Handle electrostatic-sensitive components, PCB’s and assemblies by the case or

the edge of the board.

Avoid contact with pins, leads, or circuitry.

Turn off power and input signals before inserting and removing connectors or test

equipment.

Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

Always put drivers and PCB’s component side on anti-static foam.

viii

IP65 Flat Stainless P-CAP Panel PC

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements of:

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

IP65 Flat Stainless P-CAP Panel PC

European Union

This equipment is in conformity with the requirement of the following EU legislations and

harmonized standards. Product also complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55032: 2012/AC:2013

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

IP65 Flat Stainless P-CAP Panel PC

About This User Manual

This User Manual provides information about using the Winmate® IP65 Flat Stainless P-CAP Panel

PC with Intel® Core™ i5-5200U Broadwell 2.2 GHz (turbo to 2.7 GHz) processor. This User Manual

applies to the IP65 Flat Stainless P-CAP Panel PC –R15IH3S-SPC3, R17IH3S-SPA1, R19IH3S-SPM11

and W22IH3S-SPA3.

The documentation set for the IP65 Flat Stainless P-CAP Panel PC provides information for specific

user needs, and includes:

IP65 Flat Stainless P-CAP Panel PC User Manual –contains detailed description on how to

use the Panel PC, its components and features.

IP65 Flat Stainless P-CAP Panel PC Quick Start Guide - contains detailed description on how

to use the Panel PC, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Revision History

Version

Date

Note

1.0

23-Nov-2016

Initial release

Table des matières

Autres manuels Winmate Écran tactile

Winmate

Winmate 7'' S-Series Manuel utilisateur

Winmate

Winmate W19IB3S-CHA1 Manuel utilisateur

Winmate

Winmate W07IB3S-PCM1AC Manuel utilisateur

Winmate

Winmate R15IW3S-65C3 Manuel utilisateur

Winmate

Winmate R10IB3S-67T2 Instructions d'utilisation et d'entretien

Winmate

Winmate G-WIN AMD Rugged Series Manuel utilisateur

Winmate

Winmate R15ID3S-65A1FTE Manuel utilisateur

Winmate

Winmate R17IB3S-RKA1ML Manuel utilisateur

Winmate

Winmate R15IH3S-SPC369 Manuel utilisateur

Winmate

Winmate G-WIN Slim IP65 Manuel utilisateur

Winmate

Winmate W07FA3S-PCM1AC-PoE Manuel utilisateur

Winmate

Winmate W07IB3S-POM1 Manuel utilisateur

Winmate

Winmate G-Win Series Manuel utilisateur

Winmate

Winmate W22IK3S-SPA3 Manuel utilisateur

Winmate

Winmate R15IV3S-MR series Manuel utilisateur

Winmate

Winmate W04FA3S-EHT1 Manuel utilisateur

Winmate

Winmate W07FA3S-PCO1AC-POE Guide de dépannage

Winmate

Winmate R15IB3S-65EX Manuel utilisateur

Winmate

Winmate W07IB3S-POT1 Manuel utilisateur

Winmate

Winmate R15IB3S-PCC3-PoE Manuel utilisateur

Winmate

Winmate W10RK3S-PCH2LB Manuel utilisateur

Winmate

Winmate R15IE3S-PTC3 Manuel utilisateur

Winmate

Winmate 7'' S-Series Manuel utilisateur

Winmate

Winmate R15IB3S-65A1FTP Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur