Winmate ARM-11 HMI Series Manuel utilisateur

WinMate Communication INC

ARM-11 HMI Series Panel PC

Samsung-6410 Series SBC, Low Power, High

Performance Design with AR -11 Series

Platform, TFT LCD, RS232, RS422/485 and 10/100

base-T Ethernet.

User Guide Version 1.0

ARM-11 HMI Series PPC User’s Manual

Revision History

Version

Date Note

1.0 2010.09.22

First Version

Package List

Before using this Digital Signage Evaluation Kit, please make sure that all the items listed below

are present in your package

1. Box (Packaging)

2. 1 x AR -11 Series H I Panel PC Unit

3. 1 x BSP, SDK, I G and User’s manual CD

4. 1 x AR -11 H I User’s anual

5. 1 x Screw Type Power Supply 100-240 Vac / 12Vdc, 15W

ake sure that all of the items listed above are present. Do not attempt to apply power to the

system if there is damage to any of its components.

ARM-11 HMI Series PPC User’s Manual

FCC Statement

This device complies with part 15 FCC rules. Operation is subject to the following two

conditions

：

•This device may not cause harmful interference.

•This device must accept any interference received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a class "a" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at

him own expense.

transmitted in any form or by any means, electronic or mechanical, for any purpose, without

the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

ARM-11 HMI Series PPC User’s Manual

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s),

conveys no license or title under any patent, copyright, or masks work rights to these

products, and makes no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We Communication Inc.

makes no representation or warranty that such application will be suitable for the specified

use without further testing or modification.

arranty

We warrant that each of its products will be free from material and workmanship defects

for a period of one year from the invoice date. If the customer discovers a defect, We will, at

its option, repair or replace the defective product at no charge to the customer, provided it

is returned during the warranty period of one year, with transportation charges prepaid.

The returned product must be properly packaged in it’s original packaging to obtain

warranty service.

If the serial number and the product shipping data differ by over 30 days, the in-warranty

service will be made according to the shipping date. In the serial numbers the third and

fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W07Axxxxxxxx means October of year 2007.

ARM-11 HMI Series PPC User’s Manual

Customer Service

We provide service guide for any problem as follow steps

：

First, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance. You may have the following information ready before you call

：

•Product serial number

•Peripheral attachments

•Software (OS, version, application software, etc.)

•Description of complete problem

•The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We

are always ready to give advice on application requirements or specific information on the

installation and operation of any of our products. Please do not hesitate to call or e-mail us.

Safety Precautions

•Warning!

Always completely disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is on. Sensitive

electronic components can be damaged by sudden power surges. Only experienced

electronics personnel should open the Player chassis.

•Caution!

Always ground yourself to remove any static charge before touching the CPU card.

odern electronic devices are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are not in the chassis.

ARM-11 HMI Series PPC User’s Manual

Safety and arranty

Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid

or spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment and

must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it fall

could cause damage.

The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

ake sure the voltage of the power source is correct before connecting the equipment

to the power outlet.

All cautions and warnings on the equipment should be noted.

If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

10.

Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

11.

If any of the following situations arises, get the equipment checked by service personnel:

A. Liquid has penetrated into the equipment.

B. The equipment has been exposed to moisture.

C. The equipment does not work well, or you cannot get it to work according to

the user’s manual.

D. The equipment has been dropped and damaged.

E. The equipment has obvious signs of breakage.

12.

Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20° C (-4°F) or above 60° C (140° F). It may damage the

equipment.

ARM-11 HMI Series PPC User’s Manual

Table of Contents

1 GENERAL INFOR ATION.................................................................................................8

1.1

Introduction .................................................................................................8

1.2

Features .......................................................................................................9

1.3

Dimension and Overview............................................................................10

1.4

Specifications .............................................................................................12

1.5

System Block ..............................................................................................13

1.6

AR -11 Series LCD Selection Table.............................................................13

2 Getting Started..............................................................................................................14

2.1

Input / Output Devices ...............................................................................14

2.2

Starting the Panel PC ................................................................................14

Installation User Gui e for SMDK6410 (WinCE6.0 R3)..............................................15

3.1 Overview...................................................................................................15

3.2 Copying BSP an Setting up Visual Stu io 2005 ......................................16

3.3 Creating a New OS Design ........................................................................18

3.4 Buil ing OS Image – Without KITL...........................................................23

4 H I series Panel PC ounting Guide ...........................................................................35

4.1

VESA Mount ..............................................................................................35

4.2 Panel Mount (Clip Design):.......................................................................37

Services/ Updates.........................................................................................................39

5.1

H I Official website ...................................................................................39

5.2

Company information.................................................................................39

ARM-11 HMI Series PPC User’s Manual

1 GENERAL INFORMATION

1.1 Introduction

The AR -11 H I Series PPC model is compact platform without redundant functions,

which have been designed for small-sized operator interface applications. They have 5.7” VGA

LED backlight and 7" WVGA LCD display which is a cost effective choice for a limited budget. Its

RISC kernel, the Samsung 6410 processor consumes minimum power without sacrificing

performance. The AR -11 H I Series PPC has 10/100Base-T Ethernet port and WIFI 802.11

b/g(Optional) offering solid communication ability and comes bundled with a Windows CE and

Linux 2.6.2 that supports Thin-Client solutions. The built-in Windows CE6.0 and Linux 2.6.2 OS

platform lets AR -11 H I Series PPC become an Open H I solution for system integration.

AR -11 H I Series PPC

ARM-11 HMI Series PPC User’s Manual

1. Features

(1) Samsung-6410 Processor on board

(2) 5.7” VGA(640 x 480) LCD(LED backlight) , 7" WVGA(800 x 480) LCD(CCFL backlight)

(3) Super slim and compact design with metal housing

(4) Fanless cooling system

(5) E A4/IP65 compliant front panel

(6) Built-in NAND flash memory

(7) One Standard SD card slot

(8) RS232, RS422/485 and Ethernet for external communication.

It can even browse web sites using the internal browser, which is useful for displaying

diagnostic data or even remote control panels through a web interface.

Depending on which AR -11 H I Series PPC features you choose to access, it can be

used for anything from a user interface panel to the main controller for your automation

equipment.

ARM-11 HMI Series PPC User’s Manual

1.3 Dimension and Overview

1.3.1 Dimension

R05SA 0-IPD1HM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Winmate Écran tactile

Winmate

Winmate W10IB3S-GSH1 Manuel utilisateur

Winmate

Winmate W19IB3S-CHA1 Manuel utilisateur

Winmate

Winmate R15IB3S-PCC3-PoE Manuel utilisateur

Winmate

Winmate PT Series Manuel utilisateur

Winmate

Winmate W22IB3S-PCA3 PPC Manuel utilisateur

Winmate

Winmate T5-series Manuel utilisateur

Winmate

Winmate R15ID3S-65A1FTE Manuel utilisateur

Winmate

Winmate W10IB3S-MRH2 Manuel utilisateur

Winmate

Winmate W07IB3S-PCO1-POE Manuel utilisateur

Winmate

Winmate R15IH3S-MRA3FP Manuel utilisateur

Winmate

Winmate W10FA3S-PCH2AC-PoE Manuel utilisateur

Winmate

Winmate G-WIN W07RK3S-GCT1 Manuel utilisateur

Winmate

Winmate W10IH3S-GCH1(HB) Manuel utilisateur

Winmate

Winmate R15IW3S-SPC3 Manuel utilisateur

Winmate

Winmate G-WIN AMD Rugged Series Manuel utilisateur

Winmate

Winmate W04FA3S-EHT1 Manuel utilisateur

Winmate

Winmate R10FA3S-GST2 Manuel utilisateur

Winmate

Winmate W07L100-GCM1 Manuel utilisateur

Winmate

Winmate R15IE3S-PTC3 Manuel utilisateur

Winmate

Winmate B Series Manuel utilisateur

Winmate

Winmate W07RK3S-PCO1-POE Manuel utilisateur

Winmate

Winmate P Series Manuel utilisateur

Winmate

Winmate R17IK3S-65M1 Manuel utilisateur

Winmate

Winmate 7'' S-Series Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur