Winmate R05T100-PMD1HB Manuel utilisateur
Please read this instructions before operating the device and retain them for future reference.
Panel Mount Display
5.7~32”
User Manual
V1.0
For more information on this
and other Winmate products,
please visit our website at:
www.winmate.com
Document Part Number: 91521110101F
USER MANUAL CONTENTS
- 2 -
CONTENTS
PREFACE - 3 -
ABOUT THIS USER MANUAL - 8 -
CHAPTER 1: INTRODUCTION - 10 -
1.1 Product Features - 10 -
1.2 Package Contents - 11 -
1.3 Product Overview - 12 -
1.4 OSD Control Panel - 14 -
1.4.1 Control Buttons - 14 -
1.4.2 LED Indicators - 15 -
CHAPTER 2: INSTALLATION - 17 -
2.1 Wiring Requirements - 17 -
2.2 Mounting Guide - 18 -
2.2.1 Panel Mounting - 19 -
2.2.2 VESA Mounting - 20 -
2.2 Cable Mounting Considerations - 21 -
2.3 Connecting Power - 21 -
2.4 Connecting Peripherals - 22 -
2.4.1 VGA Connector - 22 -
2.4.2 HDMI Connector - 23 -
2.4.3 DVI Connector - 23 -
2.4.4 S-Video - 24 -
2.4.5 Composite Video - 24 -
CHAPTER 3: OPERATING THE DEVICE - 26 -
3.1 Turning on the System - 26 -
3.2 OSD Menu Navigation - 27 -
CHAPTER 4: TROUBLESHOOTING - 31 -
4.1 Troubleshooting Guide - 31 -
APPENDIX A: FREQUENCY TABLE - 33 -
APPENDIX B: REMOTE CONTROL SET COMMAND - 35 -
APPENDIX C: REMOTE CONTROL GET COMMAND - 37 -
USER MANUAL PREFACE
- 3 -
PREFACE
Copyright Notice
No part of this document may be reproduced, copied, translated, or
transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in
order to improve design and/or performance. We assume no responsibility or
liability for the use of the described product(s) conveys no license or title
under any patent, copyright, or masks work rights to these products, and
make no representations or warranties that these products are free from
patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes
only. We make no representation or guarantee that such application will be
suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material
and workmanship defects for a period of one year from the invoice date. If the
customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during
the warranty period of one year, with transportation charges prepaid. The
returned product must be properly packaged in its original packaging to obtain
warranty service. If the serial number and the product shipping data differ by
over 30 days, the in-warranty service will be made according to the shipping
date. In the serial numbers the third and fourth two digits give the year of
manufacture, and the fifth digit means the month (e. g., with A for October, B
for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of year
2016.
USER MANUAL PREFACE
- 4 -
Customer Service
We provide a service guide for any problem by the following steps: First, visit
the website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every
business day. We are always ready to give advice on application
requirements or specific information on the installation and operation of any of
our products.
Naming Rule
R19LXXX-PMXX
Item
Description
R
Panel Type
19
Panel Size
LXXX
Product Size
PM
Mechanical Type(Panel Mount)
XX
Panel Model
USER MANUAL PREFACE
- 5 -
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an
example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to
know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and
explains how to avoid the potential problem.
Unealerted’ attention indique un dommage possible à l’équipement
et explique comment éviter le problem potentiel.
WARNING!/AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from
electrical hazards and how to avoid the potential problem.
Un Avertissement de Choc Électriqueindique le potentiel de
chocssur des emplacements électriques et comment éviterces
problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates
the potential risk of serious electrical shock due to improper
grounding.
Le symbole de Miseà Terre indique le risqué potential de choc
électrique grave à la terre incorrecte.
USER MANUAL PREFACE
- 6 -
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques
sensibles peuvent être endommagées par des sauts d’alimentation.
Seulement du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements
électroniques moderns sont très sensibles aux décharges
d’électricité statique. Toujours utiliser un bracelet de mise à la
terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge, ou
dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.
USER MANUAL PREFACE
- 7 -
Safety Precautions
For your safety carefully read all the safety instructions before using the
device. Keep this user manual for future reference.
Always disconnect this equipment from any AC outlet before
cleaning. Do not use liquid or spray detergents for cleaning. Use a
damp cloth.
For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage.
The openings on the enclosure are for air convection and to
protect the equipment from overheating.
CAUTION/ATTENTION
Do not cover the openings!
Before connecting the equipment to the power outlet make sure
the voltage of the power source is correct.
Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or
electrical shock.
Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
All cautions and warnings on the equipment should be noted.
CAUTION
Always ground yourself to remove any static charge before
touching the board. Modern electronic devices are very sensitive
to static electric charges. As a safety precaution, use a grounding
wrist strap at all times. Place all electronic components in a
static-dissipative surface or static-shielded bag when they are not
in the chassis.
USER MANUAL ABOUT THIS MANUAL
- 8 -
ABOUT THIS USER MANUAL
This User Manual provides information about using the Winmate® Panel Mount
Display. The documentation set provides information for specific user needs, and
includes:
Panel Mount Display User Manual –contains detailed description on
how to use the display, its components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual
product.
Document Revision History
Version
Date
Note
1.0
25-Aug-2017
New document release
USER MANUAL CHAPTER 1 INTRODUCTION
- 9 -
INTRODUCTION
This chapter gives you product overview,
describes features and hardware
specification. You will find all accessories
that come with the display device in the
packing list. Mechanical dimensions and
drawings included in this chapter.
USER MANUAL CHAPTER 1 INTRODUCTION
- 10 -
CHAPTER 1: INTRODUCTION
Congratulations on purchasing Winmate® Panel Mount Display. Versatile display
in an open-frame housing designed for rear and VESA mounting with integrated
bracket design for KIOSK applications.
The Panel Mount Display is a microprocessor-controlled to work with 5.7~32” TFT
LCD panel. It is designed to meet the demanding performance requirements of
today’s business and industrial applications.
1.1 Product Features
Winmate® Panel Mount Display features:
5.7-32”TFT LCD
1x HDMI, 1x VGA (Standard)
1 x DVI, 1 x S-Video, 1 x Composite (Optional)
Panel Mount housing
Sleek and flush mounts
Suitable for industrial applications
Ce manuel convient aux modèles suivants
20
Table des matières
Autres manuels Winmate Moniteur
Winmate
Winmate GC Series Manuel utilisateur
Winmate
Winmate R19L300-SDA1 Manuel utilisateur
Winmate
Winmate R08L100-MLU1 Manuel utilisateur
Winmate
Winmate M101B Series Manuel utilisateur
Winmate
Winmate R15L600-65C3-1 Manuel utilisateur
Winmate
Winmate R10L100-PPT2HB Manuel utilisateur
Winmate
Winmate W07L PC Series Manuel utilisateur
Winmate
Winmate R15L100-GCC3-C Manuel utilisateur
Winmate
Winmate W32L100-PTA1-SDI Manuel utilisateur
Winmate
Winmate W28L100-OFA2 Manuel utilisateur
Winmate
Winmate W27L100-CHC1 Manuel utilisateur
Winmate
Winmate R19L100-MLM1 Manuel utilisateur
Winmate
Winmate R15L600-MRA3FP Manuel utilisateur
Winmate
Winmate 19L RM Series Manuel utilisateur
Winmate
Winmate R15L600-MLA3FP Manuel utilisateur
Winmate
Winmate DS424PMB Manuel utilisateur
Winmate
Winmate R15L600-65EX Manuel utilisateur
Winmate
Winmate R15L100-RKA1 Manuel utilisateur
Winmate
Winmate R15L600-65C3-DVI Manuel utilisateur
Winmate
Winmate W07FA3S-PCM1AC-PoE Manuel utilisateur
