Winegard HD7694 Manuel utilisateur

VHF/UHF MODEL HD7694

High Definition (HD) Antenna

INSTRUCTION MANUAL

For help, email [email protected]

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000

90 DAY LIMITED WARRANTY

Winegard Company warrants this Winegard product against any defects in materials or workmanship

within 90 (ninety) days from date of purchase. No warranty claim will be honored unless at the time the

claim is made, you present proof of purchase to an authorized Winegard dealer (if unknown, please

contact Winegard Company, 3000 Kirkwood Street, Burlington, IA52601-2000, Telephone 800-288-8094).

Winegard Company (at its option) will either repair or replace the defective product at no charge to you.

This warranty covers parts, but does not cover any costs incurred in removal, shipping or reinstallation

of the product. This limited warranty does not apply if the product is damaged, deteriorates, malfunctions

or fails from: misuse, improper installation, abuse, neglect, accident, tampering, modication of the

product as originally manufactured by Winegard, usage not in accordance with product instructions

or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as

salt spray and acid rain.

The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all

handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or

replacement. Winegard dealers will arrange for the replacement or repair and return to you without

charge the product which failed due to defective material or workmanship.

WINEGARD COMPANY WILL NOTASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES,

EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE

LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.

The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or

otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial

loss, or from any other loss or damage except as set forth above.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation

of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specic legal rights and you may also have other rights which vary from

state to state.

Printed in U.S.A. © Winegard Company 2002 Rev5 3-21 1450290

WARNING:Installation of this antenna near power lines is dangerous!

For your safety, follow the installation instructions.

1450290

Rev. 2/08

Rev5 3-21

POINT THIS END

TOWARD STATIONS

PARTS LIST

Antenna Assembly Cartridge Housing

Rubber Weather Boot

ASSEMBLY

1) Remove the antenna assembly

from the carton and compare

with parts list to ensure nothing

is missing and to become familiar

with the part names.

2) Lay the antenna on the ground with

the cartridge housing receptacle

facing down and the long elements

pointing towards you. Starting

with the element closest to you,

unfold the first three elements per

Figure 1 in direction of arrows until

they lock into place in the black

plastic blocks. Unfold the rest of

the elements on this side of the

antenna to the lock position.

3) Turn the antenna over so the

cartridge housing receptacle is now

facing up. Repeat step 2. Again lift

and rotate the elements that are

folded to the opposite side of the

boom just enough to slide over the

elements and boom.

4) Unfold the reflector booms slowly

until they lock in place. Then unfold

the elements on the reflector

booms. See Figure 2.

ATTACHING ANTENNA TO MAST

Loosen nuts on the mast clamp. Slide

the antenna over the mast, pointing

the front of the antenna (small end)

towards stations and tighten mast

clamp securely using a crescent

wrench (not included).

ATTACHING THE COAX

Slide the rubber boot over the end of

the coaxial cable. Attach the coaxial

cable to the cartridge housing. Slide

the boot over the boot collar on the

housing. The coaxial downlead may

be secured to the mast with tape or

plastic wire tires. See Figure 3.

5) Attach the housing cover so all 4

snaps are locked in place. Direction

of the housing does not matter.

See Figure 3.

1 Down

2 Up & Over,

Down

3 Up &Over,

Down

Reflector Boom

Element clip tip

pointing away

from main boom

Cartridge

Housing

Attach coaxial

cable with boot

1) Mount the lightning arrestor or

75 ohm coaxial grounding block

as close as possible to where the

75 ohm coaxial cable downlead

enters the house. See Figure 4.

2) The ground wires for both the

mast and the downlead should be

copper or aluminum wire, number

eight or larger. See Figure 4.

3) The downlead wire from the

antenna to the lightning arrestor

and the mast ground wire should

be secured to the house with

stand-off insulators, spaced four

to six feet apart. See Figure 4.

NOTE: In the case of a “ground up” antenna installation, it may not be necessary to ground the

mast if the mast extends four or more feet into the earth. Consult a TV serviceman for the proper

depth in your location.

LIGHTNING PROTECTION

FOR TV ANTENNA &SET

Antenna Lead

In Wire

Ground

Clamp

Electric

Service

Equipment

Antenna

Discharge Unit

(NEC Section 810-20)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Ground

Clamps

Grounding Conductors

(NEC Section 810-21)

NEC - National Electrical Code

Example of antenna grounding as per

National Electrical Code, ANSI/NFPA 70

(May substitute a 75 ohm

Coax Grounding Block)

Figure 4

Example of antenna grounding as per

National Electrical Code, ANSI/NFPA 70

NEC – Nation Electrical Code

Antenna

Downlead Wire

Ground

Clamp

Electric

Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20).

May substitute a 75 ohm

coax grounding block

Ground Clamp

Power Service Grounding Electrode

System (NEC Art 250, Part H)

Grounding

Conductors (NEC

Section 810-21)

Figure 1

Figure 2

Figure 3

NOTE: To prevent damage in shipping, some of the elements are folded to the opposite side of

the boom. For maximum performance, you must unfold the elements correctly. Please follow the

steps below.

Autres manuels Winegard Antenne

Winegard

Winegard HD7080P Manuel utilisateur

Winegard

Winegard Movin' View MV3500T Manuel utilisateur

Winegard

Winegard RZ-7500 Manuel utilisateur

Winegard

Winegard YA7000C Manuel utilisateur

Winegard

Winegard HD7694P Manuel utilisateur

Winegard

Winegard SensarPro Manuel utilisateur

Winegard

Winegard MA1000W Manuel utilisateur

Winegard

Winegard MT-4000 Manuel utilisateur

Winegard

Winegard RoadTrip Mission Manuel utilisateur

Winegard

Winegard RD-9046 Manuel utilisateur

Winegard

Winegard RT8000T Manuel utilisateur

Winegard

Winegard Movin' View MV3500A Manuel utilisateur

Winegard

Winegard RV-7020 Manuel utilisateur

Winegard

Winegard RM-4600 Instructions originales

Winegard

Winegard WV750 Manuel utilisateur

Winegard

Winegard HD7000R Manuel utilisateur

Winegard

Winegard FlatWave AIR Manuel utilisateur

Winegard

Winegard Carryout G2+ Manuel utilisateur

Winegard

Winegard HD-6010 Manuel utilisateur

Winegard

Winegard In-Motion MVT-35W Manuel utilisateur

Winegard

Winegard Movin' View MV-1111 Manuel utilisateur

Winegard

Winegard TRAV'LER SK-73UP Guide de démarrage rapide

Winegard

Winegard HD-7084P Manuel utilisateur

Winegard

Winegard AIR 360+ Manuel utilisateur

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur