Wincomm WLP-7A20 Series Manuel utilisateur

WLP-7A20 Series

User’s Manual

P/N: 205G00WLP7A200, Version V1.1

All other brand names are registered trademarks of their respective owner

Printed in Taiwan.

The information contained in this document is subject to change without any

notices.

Acknowledgments

Greeting & Setup

Thank you for purchasing the WLP-7A20 Panel PC. We wish that this unit

will be durable and reliable in providing your needs. Please follow the

instructions below to ensure the unit continues to have high performance

Unpacking

After opening the carton, there will be a unit with an accessory box.

Examine the contents to see if there are damages to the unit and if all

accessories are present.

Setting up

Please read this manual carefully and remember to keep this manual for

future reference.

Safety Instructions & Cleaning

The unit has undergone various tests in order to comply with safety

standards. Inappropriate use may be dangerous. Please remember to

follow the instructions below to insure your safety during the installation and

operating process.

Transporting & Placement of unit

1. When moving the unit on a cart; be very cautious. Quick stops,

III

excessive forces and uneven surfaces may cause the cart to overturn

thus risking the unit to fall to the ground.

2. If the Monitor display unit does fall to the ground, immediately turn the

power off and disconnect cords. Then contact a service technician for

repairs. Continual use of the unit may result cause a fire or electric

shock. Also, do not repair the unit on your own.

3. Having two or more people transporting the display unit is

recommended. In addition, when installing the open frame by

suspending it also requires two or more people.

4. Before suspending the unit, make sure the material used for

suspension is sturdy and stable. If not properly suspended, the display

unit may fall and cause serious injury to people standing nearby as

well as to the unit itself.

5. If you wish to mount the display unit, remember to use only the

mounting hardware recommended by the manufacturer.

Electrical and Power Source Related

1. This Monitor display unit must operate on a power source as shown on

the specification label. If you are not sure what type of power supply

used in the area, consult your dealer or local power supplier.

2. The power cords must not be damaged. Applied pressure, added heat,

and tugging may damage the power cord.

3. The power cord must be routed properly when setup takes place. We

advise that this aspect measure is to prevent people from stepping on

the cords or while the unit is suspended to prevent flying objects from

getting tangled with the unit.

4. Do not overload the AC outlets or extension cords. Electrical shocks or

fires may occur from overloading.

5. Do not touch the power source during a thunderstorm.

6. If your hands are wet, do not touch the plug.

7. Use your thumb and index finger, grip firmly on the power cord to

disconnect from the electrical socket. By pulling the power cord, may

result in damaging it.

8. If the unit is not going to be in use for an extended period of time,

remember to disconnect the unit.

9. Connect the unit to a power source with the same numerical value as

spec. label shown. Please use only the power cord provided by the

dealer to ensure safety and EMC compliance.

Various Factors of Environment

1. Do not insert objects into the openings.

2. Do not have liquids seep into the internal areas of the Monitor display

unit.

3. Having liquids seep in or inserting objects into the unit may result in

electric shocks from taking and/or short circuiting the internal parts.

4. Do not place the Monitor display unit in the presence of high moisture

areas.

5. Do not install the Monitor display unit in a wet environment.

6. Do not place near unit near heat generating sources.

7. Do not place the unit in a location where it will come in contact with

fumes or steam.

8. Remember to keep the Monitor display unit away from the presence of

dust.

9. If water has flow in or seep in, immediately disconnect the open frame

unit. Then contact a service technician for repairs.

Ventilation Spacing

1. Do not cover or block the openings on the top and back sides of the

display unit. Inadequate ventilation may cause overheating thus

reducing the lifespan of the unit.

2. Unless proper ventilation is present, do not place unit in an enclosed

area; such as a built-in shelf. Keep a minimum distance of 10 cm

between the display unit and wall.

Cleaning the unit

1. Remember to turn off the power source and to unplug the cord from the

outlet before cleaning the unit.

2. Carefully dismount the unit or bring the unit down from suspension to

clean.

3. Use only a dry soft cloth or clean room wiper when cleaning the LCD

panel or touch screen surface. Use a soft cloth moistened with mild

detergent to clean the display housing.

4. Remember to avoid having liquids seep into the internal components.

Servicing, Repairing, Maintenance & Safety Checks

1. If the unit is not functioning properly, observe the performance level of

the display closely to determine what type of servicing is needed.

2. Do not attempt to repair the Monitor display unit on your own.

Disassembling the cover exposes users’ to high voltages and other

dangerous conditions. Notify and request a qualified service

technician for servicing the unit.

3. If any of the following situations occur turn the power source off and

unplug the unit. Then contact a qualified service technician

i. A liquid was spilled on the unit or objects have fallen into the unit.

ii. The unit is soaked with liquids.

iii. The unit is dropped or damaged.

iv. If smoke or strange odor is flowing out of the open frame unit.

v. If the power cord or plug is damaged.

vi. When the functions of the unit are dysfunctional.

4. When part replacement is needed. Make sure service technician uses

replacement parts specified by the manufacturer, or those with the

same characteristics and performance as the original parts. If

unauthorized parts are used it may result in starting a fire, electrical

shock and/or other dangers.

Battery Installation

Follow below instructions and notice the caution for replacing and disposing

of the RTC Lithium battery CR2032 for safety consideration.

CAUTION:

There is danger of explosion, if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the

manufacturer’s instruction.

The specification is subject to change without notice.

VII

Version Change History

Date

Version

Description

Remark

2013/1/7

V1.0

First release

Cosa

2013/2/1

V1.1

Modify CPU SPEC

Cosa

VIII

Table of Contents

How to Use This Manual...............................................................................IX

System Overview...........................................................................1

System View....................................................................................................5

I/O connectors .................................................................................................8

VESA mount installation.................................................................................8

Panel mount installation................................................................................10

Unpacking .....................................................................................................12

Getting Started..............................................................................14

Setting up the System.................................................................................... 14

Installing System Software............................................................................14

Installing the Drivers.....................................................................................15

BIOS Setup Information.............................................................18

Appendix........................................................................................30

A. Jumper settings and Connectors.......................................30

B. Wake UP on LAN Function...................................................48

How to Use This Manual

This manual is written for the system integrator, PC technician and

knowledgeable PC end user. It describes how to configure your WLP-7A20

Panel PC to meet various operating requirements. The user’s manual is

divided into three chapters, with each chapter addressing a basic concept

and operation of the server board.

Chapter 1: System Overview - presents what you have inside the box

and gives you an overview of the product specifications and basic

system architecture for the WLP-7A20 Panel PC.

Chapter 2: System Installation - describes how to set up the system.

Chapter 3: BIOS Setup Information - specifies the meaning of each

setup parameter, how to get advanced BIOS performance and update

to a new BIOS. Additionally, the POST checkpoint list will give you a

guide for troubleshooting.

The contents of this manual are subject to change without prior notice.

These changes will be incorporated in new editions of this manual.

System Overview

System Specification

CPU

Intel® Core™ i5-3317U

Chipset

Intel® BD82HM65 PCH

Audio

Realtek ALC262 audio codec, 2+2 watts power amplifier

LAN

Marvell 88E8071 Giga LAN x 2

Memory

Two 1066/1333 MHz DDR3 SODIMM socket support dual

Channel, non-ECC, up to 8GB

I/O

Serial ATA

SATA 2, 300 MB/s transfer rate x 2

Serial port

RS232,422,485 x 1, RS232 x 5

USB

External USB 2.0 x 4 (Type A)

Internal 3.3V Socket x 3

5V Pin Head x 4 (1 reserved for touch screen)

WDT

Generates system reset; 256 segments, 0, 1, 2…255

sec/min.

BIOS

Brand: AMI

Flash ROM size: 4M bytes

Support RTC wakeup /Wake on LAN /Power on after power

failure/PnP/ACPI/RTC

Table des matières

Autres manuels Wincomm Écran tactile

Wincomm

Wincomm WMP-226(V) Manuel utilisateur

Wincomm

Wincomm WTP-9A66 Series Manuel utilisateur

Wincomm

Wincomm WTP-8866-15 Manuel utilisateur

Wincomm

Wincomm WTP-8B66 Series Manuel utilisateur

Wincomm

Wincomm WLP-7B20 Series Manuel utilisateur

Wincomm

Wincomm WTP-9E66-15 Manuel utilisateur

Wincomm

Wincomm WLP-7821-17 Manuel utilisateur

Wincomm

Wincomm WTP-8865 series Manuel utilisateur

Wincomm

Wincomm WMP-153 Manuel utilisateur

Wincomm

Wincomm WMP-17F Manuel utilisateur

Wincomm

Wincomm WMP-24C Manuel utilisateur

Wincomm

Wincomm WMP-248 Manuel utilisateur

Wincomm

Wincomm WTP-8B66-15O Manuel utilisateur

Wincomm

Wincomm WTP-9A66 Series Manuel utilisateur

Wincomm

Wincomm WMP-19B Manuel utilisateur

Wincomm

Wincomm WTP-8B66 Series Manuel utilisateur

Wincomm

Wincomm WTP-8866-19 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur