Wincomm WTP-9G66 Manuel utilisateur
i
WTP-9G66
Industrial Panel PC
USER’S MANUAL
V1.0
Copyright©,2021. All rights reserved
All other rand names are registered trademarks of their respective owners.
The information contained in this document is su ject to change without notice
MAY 04 2021
ii
Version Change History
Date Version
Description Remar
2021/4/12 1.0 First release IVY
iii
Ac nowledgments
Intel® Celeron processor is registered trademarks of Intel®
Corporation.
IBM, PC/AT, PS/2 are trademarks of International Business
Machines Corporation.
Microsoft
®
Windows is a registered trademark of Microsoft
®
Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
ITE is a trademark of Integrated Technology Express, Inc.
Intel is a trademark or registered trademark of Intel
Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Win ond is a registered trademark of Win ond Electronics
Corporation.
All other product names or trademar s are properties of
their respective owners.
iv
FCC Class B
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 18 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment.
This equipment generates, uses and can radiate radio frequency energy. If
not installed and used in accordance with this user manual, it may cause
harmful interference to radio communications.
Note that even when this equipment is installed and used in accordance
with this user manual, there is still no guarantee that interference will not
occur. If this equipment is believed to be causing harmful interference to
radio or television reception, this can be determined by turning the
equipment on and off. If interference is occurring, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment to a power outlet on a circuit different from
that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Warning:
Any changes or modifications made to the equipment which are
not expressly approved by the relevant standards authority could
void your authority to operate the equipment.
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
Do not modify this equipment without authorization of the
manufacturer.
WTP-9G66 User’s manual 1
Safety Instructions
Intended use
The WTP-9G66 is intended to serve as an industrial monitor which
is designed for general purpose for industrial environment.
Intended User profile
The equipment is intended for infant or adults y profession
Health care professionals.
Greeting & Setup
Thank you for purchasing the WTP-9G66 unit. We wish that this
unit will e dura le and relia le in providing your industrial
application needs. Please follow the instructions elow to ensure
the unit continues to have high performance.
Unpac ing
After opening the carton, there will e a industrial panel PC unit
with an accessory ox. Examine the contents to see if there are
damages to the unit and if all accessories are present.
Setting up
Please read this manual carefully and remem er to keep this
manual for future reference.
Safety Instructions & Cleaning
The unit has undergone various tests in order to comply with
safety standards. Inappropriate use of the open frame unit may
e dangerous. Please remem er to follow the instructions elow
to insure your safety during the installation and operating
process.
Transporting & Placement of unit
1. When moving the unit on a cart; e very cautious. Quick
stops, excessive forces and uneven surfaces may cause
the cart to overturn thus risking the unit to fall to the
ground.
2. If the industrial panel PC unit does fall to the ground,
immediately turn the power off and disconnect cords. Then
contact a service technician for repairs. Continual use of
WTP-9G66 User’s manual
2
the unit may result cause a fire or electric shock. Also, do
not repair the unit on your own.
3. Having two or more people transporting the display unit is
recommended. In addition, when installing the unit y
suspending it also requires two or more people.
4. Before suspending the unit, make sure the material used
for suspension is sturdy and sta le. If not properly
suspended, the display unit may fall and cause serious
injury to people standing near y as well as to the unit
itself.
5. If you wish to mount the display unit, remem er to use
only the mounting hardware recommended y the
manufacturer.
Electrical and Power Source Related
1. This industrial panel PC unit must operate on a power
source as shown on the specification la el. If you are not
sure what type of power supply used in the area, consult
your dealer or local power supplier.
2. The power cords must not e damaged. Applied pressure,
added heat, and tugging may damage the power cord.
3. The power cord must e routed properly when setup takes
place. We advise that this aspect measure is to prevent
people from stepping on the cords or while the unit is
suspended to prevent flying o jects from getting tangled
with the unit.
4. For plug-in equipment, the power outlet socket must e
located near the equipment and must e easily accessi le.
5. Do not overload the AC outlets or extension cords.
Electrical shocks or fires may occur from overloading.
6. Do not touch the power source during a thunderstorm.
7. If your hands are wet, do not touch the plug.
8. Use your thum and index finger, grip firmly on the power
cord to disconnect from the electrical socket. By pulling the
power cord, may result in damaging it.
9. If the unit is not going to e in use for an extended period
of time, remem er to disconnect the unit.
WTP-9G66 User’s manual 3
10. The industrial panel PC unit uses voltage etween
100-240VAC. Connect the unit to a power source with the
same numerical value as shown. Please use only the power
cord provided y the dealer to ensure safety and EMC
compliance.
Various Factors of Environment
1. Do not insert o jects into the openings.
2. Do not have liquids seep into the internal areas of the
industrial panel PC unit.
3. Having liquids seep in or inserting o jects into the unit
may result in electric shocks from taking and/or short
circuiting the internal parts.
4. Do not place the industrial panel PC unit in the presence of
high moisture areas.
5. Do not install the industrial panel PC unit in a wet
environment.
6. Do not place near unit near heat generating sources.
7. Do not place the unit in a location where it will come in
contact with fumes or steam.
8. Remem er to keep the industrial panel PC unit away from
the presence of dust.
9. If water has flow in or seep in, immediately disconnect the
open frame unit. Then contact a service technician for
repairs.
Ventilation Spacing
1. Do not cover or lock the openings on the top and ack
sides of the display unit. Inadequate ventilation may cause
overheating thus reducing the lifespan of the unit.
2. Unless proper ventilation is present, do not place unit in an
enclosed area; such as a uilt-in shelf. Keep a minimum
distance of 10 cm etween the display unit and wall.
Operating principle
A Industrial Panel PC has four main components: the
arithmetic logic unit (ALU), the control unit, the memory,
WTP-9G66 User’s manual
4
and the input and output devices (collectively termed I/O).
These parts are interconnected y uses, often made of
groups of wires.
The control unit, ALU, and registers are collectively known as
a central processing unit (CPU).
Inside each of these parts are thousands to trillions of small
electrical circuits which can e turned off or on y means of
an electronic switch. Each circuit represents a it ( inary
digit) of information so that when the circuit is on it
represents a "1", and when off it represents a "0" (in positive
logic representation). The circuits are arranged in logic gates
so that one or more of the circuits may control the state of
one or more of the other circuits.
Cleaning the unit
1. Remem er to turn off the power source and to unplug the
cord from the outlet efore cleaning the unit.
2. Carefully dismount the unit or ring the unit down from
suspension to clean.
3. Please use a dry soft cloth to clean the unit.
4. Take a dry cloth and wipe the unit dry. Remem er to avoid
having liquids seep into the internal components and areas
of the industrial panel PC unit.
Error message / Troubleshooting
No power
1.
Connect the AC adapter to the computer, and
then plug it into an AC outlet.
2. Turn on the computer.
Servicing, Repairing, Maintenance & Safety Chec s
1. If the unit is not functioning properly, o serve the
performance level of the display closely to determine what
type of servicing is needed.
WTP-9G66 User’s manual 5
2. Do not attempt to repair the industrial panel PC unit on
your own. Disassem ling the cover exposes users’ to high
voltages and other dangerous conditions. Notify and
request a qualified service technician for servicing the unit.
3. To avoid risk of electric shock, this equipment must only e
connected to a supply mains with protective earth.
4. If any of the following situations occur turn the power
source off and unplug the unit. Then contact a qualified
service technician.
(a) A liquid was spilled on the unit or o jects have fallen
into the unit.
( ) The unit is soaked with liquids.
(c) The unit is dropped or damaged.
(d) If smoke or strange odor is flowing out of the operating
unit.
(e) If the power cord or plug is damaged.
(f) When the functions of the unit are dysfunctional.
5. When replacement parts are needed for the industrial
panel PC unit, make sure service technicians use
replacement parts specified y the manufacturer, or those
with the same characteristics and performance as the
original parts. If unauthorized parts are used it may result
in starting a fire, electrical shock and/or other dangers.
WTP-9G66 User’s manual
6
EU-wide legislation, as implemented in each
Mem er State, requires that waste electrical and
electronic products carrying the mark (left) must e
disposed of separately from normal household
waste. This includes monitors and electrical
accessories, such as signal ca les or power cords.
When you need to dispose of your display products,
please follow the guidance of your local authority, or
ask the shop where you purchased the product, or if
applica le, follow any agreements made etween
yourself.
The mark on electrical and electronic products only
applies to the current European Union Mem er
States.
Table des matières
Manuels PC industriel populaires d'autres marques
Dell
Dell Embedded Box PC 5000 Manuel utilisateur
IBASE Technology
IBASE Technology ASB200-918 Series Manuel utilisateur
Lenovo
Lenovo ThinkCentre M90q Manuel du propriétaire
IXXAT
IXXAT Econ 100 Manuel utilisateur
Kontron
Kontron KBox A-151-TGL Manuel utilisateur
AXIOMTEK
AXIOMTEK ICO500-518 Series Manuel utilisateur