WILDCAT MINIBMX USER GUIDE 5
12
View down the back of the disc. Align the brake
and tighten down B) the 2 x hex bolts with a 5mm
allen key. Ensure there is enough clearance both
sides so the disc does not rub. If there isn’t enough
clearance, the inside brake pad can be adjusted
back by removing the rear wheel to access
the 5mm hex adjuster on the back of the brake
closest to the wheel.
We’ll come back and hook up the brake once
the handle bars are on.
13
Position the seat at the desired height, and
tighten the clamp using a 4mm allen key.
Ensure the seat is aligned with the frame.
NOTE: Do not exceed the max height marking on
the back of the seat post.
11
Next step is aligning the brakes. This is easiest to
do before you fit the bars. Sit in a chair with the
rear wheel in your lap, front wheel on the ground.
This gives you a clear look down the back of
the disc. A) First loosen the cable clamp off with
a 5mm allen key. B) These are the hex bolts to
tighten the brake down once aligned.
B
B
BRAKES PART 1
B
Seat
a
14
If you have a Pivotal seat, the seat angle can be
adjusted with a 6mm allen key, through the slit on
the top of the seat. Simply loosen, rotate to the
desired position and tighten.
5 5
4 6
Skip these steps if your Wildcat is brakeless!
