Camera Operation Flow Chart
Press and hold Power / Navigation button for
3 sec; camera will enter PIR Auto Working mode
after indicator flashes 5 times;
In PIR Auto Working Mode, press Menu / OK
button once to wake up camera LCD screen
to enter TEST Mode;
Press and hold Power / Navigation button
for 5 seconds to turn off camera.
In TEST Mode, press Menu/OK button to
enter settings menu; now button is always
for navigation; button is always for OK to
save/confirm needed setup;
Press and hold button for 3 seconds to
return back to First Navigation Menu after all
settings are done
In First Navigation Menu, press and hold button
for 3 seconds to enter PIR Auto Working Mode;
1. Set Camera, or Video, or Camera + Video
First Navigation Menu
, press Menu / OK button ; camera is in camera mode;
, press Menu / OK button ; camera is in video mode;
, press Menu/OK button ; camera is in cam+video mode
2. After configuration above, press and hold button for 3
seconds to return back to TEST Mode main interface; then press
Power/Navigation button ; camera now is recording photo/
video/ photo + video;
3. Press Power/Navigation button again to stop video
recording;
Note:
1) To ensure camera functions well; plz adjust camera to be with correct time;
2) Plz don’t turn on Time Lapse and Delay at the same time;
3) Camera can be turned off by pressing and holding button any time.
