7
A
B C D
Button Function
<FN>
A
Used to access the mode or to return to a previous mode
option
<UP> B Change the value of function you choosing in ascending
order
<DOWN> C Change the value of function you choosing in descending
order
<ENTER> D locate the function of which you want to change the value
Press the MODE button, you can browse all the function, such as AUTO RUN, DMX MODE,
SLAVE MODE, SOUND
While the function you want, for example, if DMX MODE, the ADDR & MODE can be adjusted.
You
can press SETUP button to catch them, if MODE, it has 6 models, press UP & DOWN to
locate it.
Program
Program
Program
Program Mode
Mode
Mode
Mode &
&
&
& Sound
Sound
Sound
Sound Mode:
Mode:
Mode:
Mode:
In Program Mode you can pick your desired factory installed program; static color, color show,
color fade, or color cycle. You can apply a strobe effect to static colors, and control the speed of
the color shows, color fade, and color cycle.
1. Plug the fixture in and press the MODE button till 01
01
01
01 static
static
static
static display, you are now in program
model. Press UP and DOWN to find your desired effect.
2. If you have selected a static color, press SET UP button to enter into the flash rate (F:
000-100), press UP and DOWN to adjust and select your desired flash rate.
3. When you have chosen a color show (02-17), press SET UP button, the display will show
“ S000-S100 ” , Press UP and DOWN button to adjust and set the speed. When the display
shows “ F000-F100 ” , your desired program is running in strobe effect.
4. When the display shows Sound, the unit is working in sound active mode, and the sensitivity
(SENS: 00-99) is adjustable.
Master-Slave
Master-Slave
Master-Slave
Master-Slave Operation:
Operation:
Operation:
Operation:
This function will allows you to link units together to run in a Master-Slave mode. In
Master-Slave operation one unit will act as the con trolling unit and the others will react to the
controlling units built-in programs. Any unit can act as a Master or as a Slave however, only one
unit can be programmed to act as the “Master. ”
Master-Slave
Master-Slave
Master-Slave
Master-Slave Connections
Connections
Connections
Connections and
and
and
and Settings:
Settings:
Settings:
Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR
microphone cables to link your units to-gether. Remember that the Male XLR connector is the
input and the Female XLR connector is the output. The first unit in the chain (master) will use
the female XLR connector only. The last unit in the chain will use the male XLR connector
only.
2. Using the Master unit, choose your desired mode or program and connect the “Slave ”unit or
